Neumann BCM 104 Condenser Broadcast Microphone Kit with Boom Arm, Cable, and Windscreen

Equally ideal for broadcast studios, voiceover artists, and podcasters, this Kit features the Neumann BCM 104 large-diaphragm condenser microphone, an adjustable table-mounted mic boom with a 12" fixed horizontal arm, a removable foam windscreen, and a balanced XLR mic cable. The BCM 104 s cardioid polar pattern, gentle presence boost, internal pad and high-pass switches, and integrated pop screen allow it to communicate clear and crisp speech quality. Being a condenser mic, the BCM 104 requires 48V phantom power for operation. Once the mic boom is installed on a desk or table, the BCM 104 can be easily attached, then connected to your mixer using the supplied XLR cable.

Neumann BCM-104 - Large Diaphragm Condenser Broadcast Microphone

The BCM-104 Large Diaphragm Condenser Broadcast Microphone from Neumann features a large-diaphragm, cardioid condenser capsule. It has a frequency response that is flat up to 3 kHz and then gradually boosted in the higher frequencies. If required, internal switches can be used to compensate for the proximity effect and to reduce the sensitivity by 14 dB.

The microphone headgrille twists off for quick cleaning. In front of the capsule, mounted on a frame holder, a fine gauze serves as a built-in popscreen. The microphone has an elastic mount against structure-borne noise, that is compatible with standard broadcast-segment microphone arms.

The microphone headgrille houses the K 04 large-diaphragm capsule, which has a flat frequency response up to 3 kHz. Higher frequencies have an increased presence up to 2 dB. Since the above-mentioned microphone characteristics are obtained without the use of resonance effects, the microphone features excellent transient response and transmits all transient phenomena of music and speech without any coloration.

A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from settling on the diaphragm. The pop screen can be removed for cleaning without the use of tools.

Instead of a transformer to couple the microphone output to the supply voltage, the BCM-104 has an electronic circuit which, like a transformer, provides for good common mode rejection. Interference induced in the balanced modulation line is thus suppressed effectively. With a very low self-noise of 7 dB(A), and an overload capability extending to 138 dB SPL, the BCM-104 has a dynamic range of 131 dB (A-weighted).

The BCM-104 amplifier has a linear operation down to 20 Hz. An active filter efficiently suppresses signals below this frequency. In order to compensate for the proximity effect, an electronic high-pass filter, activated by a switch, is built into the microphone. This filter reduces frequencies below 100 Hz by 12 dB/octave. A 14 dB pre-attenuation switch is provided in order to adjust the sensitivity, if necessary, to circuits designed for dynamic microphones. But this will increase the self-noise accordingly. Both switches are located inside the microphone housing, since they will normally be operated only once, when the broadcasting facility is set up.

The preferred mode of operation is to suspend the BCM-104 from a standard studio boom arm. A thread adapter to fit different connector threads is included. In order to provide protection from structure-borne noise, both the capsule and the microphone in its mount are elastically suspended.

Large-diaphragm condenser capsule

Cardioid directional characteristic

Integrated pop protection and elastic suspension

Mechanical compatibility with standard studio boom arms

High-pass and pre-attenuation internal switches

EAN: 615104084834

O.C. White ProBoom Ultima Gen2 Ultralow-Profile Adjustable Mic Boom

Perfect for podcasts, interviews, and show hosts, the O.C. White ProBoom Ultima Gen2 Ultralow-Profile Adjustable Mic Boom lets you achieve optimal microphone positioning while maintaining sight of your computer monitor and guests. Its ultralow-profile design utilizes a 12" fixed horizontal arm to keep it close to your table/desk.

The mic boom provides a maximum reach of 29" and a weight capacity of up to five pounds, ensuring that it can safely and conveniently accommodate your favorite microphone. It features a 13mm mounting stud and includes a 13mm machined table bushing and comes with all necessary tools for proper installation and adjustment.

• 29" reach
• 12" fixed horizontal arm
• 5 lb maximum weight capacity
• 13mm mounting stud
• Black and charcoal finish
• Includes all necessary tools for adjustment and installation
• Machined table bushing (13mm ID) included
• Machined table bushing requires one drilled 7/8" (0.875" ) clearance hole

Neumann WS47 Windscreen for D-01 Microphone (Black)

Neumann s WS47 Windscreen for D-01 Microphone (Black) is an open-cell polyurethane foam which attenuates close-range sounds, wind, and fast movements of the microphone boom.

The wind noise attenuation was measured without electrical filtering in a turbulent air stream traveling at 20 km/h, generated by a noiseless wind machine.

Designed to Fit

The WS47 windscreen is specifically designed to fit D-01 microphones made by Neumann.

Attenuation

Wind noise attenuation is measured at 22 dB, while attenuation at 15 kHz is 3 dB.

Black

This particular windscreen comes in black so it perfectly matches your professional environment and equipment.

EAN: 615104068261

Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable (20 , Black)

The black Kopul Premium Performance 3000 Series XLR Male to XLR Female Microphone Cable (20 ) is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and provide protection against EMI, RFI, and static noise. While the cable s color-coding affords the ability to quickly differentiate between multiple connections on stage, it provides a pleasant aesthetic quality at the same time.

Premium Performance 3000 Series cables are made from 24-AWG OFC copper wire that s wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. The 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.

95% dual-spiral shielding offers protection from EMI and RFI noise

Twin conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable s signal from radiating and affecting nearby cables and helps prevents external EMI from penetrating to the cable s core

24-AWG oxygen-free stranded copper inner core provides the best possible conductivity

Cotton yarn reduces electrostatic and microphonic noise

All solder points shrink-wrapped for protection

Neutrik XX silver connectors offer high conductivity

Caged type contact and improved ground contact

EAN: 847628558304