This matched pair of ELM-A microphones from Pearl Microphones Labs provides musicians, engineers, and producers with a pair of large-diaphragm condensers with continuously variable polar patterns designed for professional stereo studio recording. At the heart of the ELM-A lies the rubber-fitted ELM capsule, a unique 7:1 rectangular condenser capsule that offers an extremely smooth off-axis response, detailed sound capture, and very-low self noise. This iteration of the ELM series provides dual outputs for each side of the capsule, allowing for seamless polar pattern changes in post-production and giving engineers a powerful tool for fine-tuning critical mixes.
The 7:1 length/width ratio of the capsule means that the polar pattern of the capsule functions like a standard cardioid in the horizontal plane, while vastly reducing the high frequencies, arriving from the vertical plane above and below the mic, a property that can be extremely useful for minimizing unwanted reflections from the floor and ceiling, providing the audio engineer with a valuable tool to handle poor room acoustics and challenging acoustical environments. This unusually narrow horizontal plane makes the ELM-A an excellent choice for choirs, drum overheads, vocals, instruments, string orchestras, symphonies, and ensembles. The transformerless circuitry yields crisp, detailed, and nuanced reproduction of sources with a self noise of only 11 dBA.
Each mic in this matched pair features a 5-pin XLR connector. Please note that dual 3-pin XLR breakout cables are available separately. Two rubber shockmounts and a wooden case are included.
Continuously Variable Polar Pattern in Post
- Recording the mic's outputs onto two channels provides complete control over the polar pattern while mixing. Use only the front-capsule output for a standard cardioid pattern, while dialing in the rear capsule gives you an omnidirectional pickup. For a figure-of-eight response with a good rejection of 90° off-axis sounds, flip the polarity of the rear capsule.
- This also means that the ELM-A can act as a 180-degree stereo microphone and that it can be used for several stereo configurations, such as M-S or Blumlein.
Pearl Microphone Labs ELM-A Specs
Key Specs
Form Factor | Stand/Boom Mount |
Element Type | 2x Condenser |
Polar Pattern | Cardioid |
On-Board Controls | No |
Frequency Range | 20 Hz to 25 kHz |
Maximum SPL | 126 dB SPL |
Analog Output | 1x XLR 5-Pin (on Mic) |
Power Sources | Phantom Power |
Microphone
Primary Applications | Live Sound, Studio Recording |
Form Factor | Stand/Boom Mount |
Intended Sound Sources | Vocals, Speech/Voice-Over, Violin, Choir, Orchestra |
Sound Field | Mono / Stereo |
Element Type | 2x Condenser |
Polar Pattern | Cardioid |
Pattern Selection | Continuously Variable (Adjustable via Software) |
Orientation | Side Address |
Circuitry | Solid-State |
Pad | No |
High-Pass Filter | No |
Tone Adjustment | No |
Gain Adjustment | No |
On-Board Controls | No |
Performance
Frequency Range | 20 Hz to 25 kHz |
Maximum SPL | 126 dB SPL |
Impedance | 100 Ohms |
Load Impedance | 1 Kilohms |
Sensitivity | 22 mV/Pa at 1 kHz |
Equivalent Noise Level | 11 dB A-Weighted |
Connectivity
Analog Output | 1x XLR 5-Pin (on Mic) |
Power
Power Sources | Phantom Power |
Operating Voltage | 48 V |
Physical
Color | Black |
Mounting Thread Size | 3/8"-16 Female (5/8"-27 Female with Included Adapter) |
Environmental Protection | No |
Dimensions | ø: 1.1 x L: 1.1" / ø: 28 x L: 28 mm |
Weight | 10.8 oz / 305 g |
In the Box
- Pearl Microphone Labs ELM-A Large-Diaphragm 180-Degree Linear Stereo Condenser Microphone with Dual Outputs (Matched Pair)
- Wooden Box
- Lifetime Warranty
No posts found