RODE Broadcaster Large-Diaphragm Cardioid Condenser Microphone

RODE, Condition:New, MPN:BROADCASTER
311.74
14 Days
Price in points: 312 points
Reward points: 1 point
ROB
In stock
+

Minimum quantity for "RODE Broadcaster Large-Diaphragm Cardioid Condenser Microphone" is 1.

Ships within 48 hours, Ships from our european warehouse, Low-cost shipping all over Europe, New product, Local european warranty, 14 Day money back guarantee
Shipping time and rates:
Yes, we can ship to United States
RODE Broadcaster Large-Diaphragm Cardioid Condenser Microphone

EAN: 698813000357

Give your voice a rich, full, radio-ready sound with the Rode Broadcaster, a large-diaphragm condenser microphone designed specifically for broadcast, voice-over, radio, and podcast applications. The 1 gold-plated capsule, low-noise circuitry, and pronounced proximity effect work together to deliver a warm and robust tone worthy of pro-level productions. Plus, the mic s cardioid polar pattern naturally rejects sound behind the mic, picking up less background noise than many other polar responses.

Following broadcast tradition, it is an end-address mic with a clip that works with stands or boom arms (available separately). Unlike most mics, it has a special LED that can be used for On-Air indication when properly wired to a compatible console. Whereas many mics require an external screen to inhibit jarring p and b sounds, the Broadcaster has an internal pop filter designed to control such plosives. Being a true condenser mic, the Broadcaster should be connected via an XLR mic cable (available separately) to a mixer channel, mic preamp, or audio device that can supply phantom power.

For Radio, Broadcasts, and Podcasts

The Broadcaster is a large-diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications. Its rich, full-quality tailored response has an emphasized proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a podcast mic or a voice-over microphone for film and television.

Internal Pop Filter

The Broadcaster features an internal pop filter, designed to minimize vocal plosive sounds that can overload the microphone capsule and distort the audio output.

High-Pass Filter

In addition to the Broadcaster s native 20 Hz to 20 kHz response, a selectable high-pass (low-cut) filter at 75 Hz is available to prevent low-end noise such as air conditioners and traffic from being recorded.

On-Air Indicator

The Broadcaster features an innovative On-Air indicator on the body that can be wired for external activation by the Channel On/Mute function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.

Features at a Glance
  • Classic broadcaster-style, end-address mic
  • Emphasized proximity effect for robust vocal sound
  • Cardioid polar pattern reduces background noise
  • HF2 1 capsule with gold-plated diaphragm
  • Internal pop filter reduces plosives
  • LED for power status or On-Air indication
  • Low-noise JFET circuitry
  • Switchable voice-tailored 75 Hz low-cut filter
  • Rugged stainless steel body
  • XLR 3-pin output connector
  • Operates on phantom power (24 or 48 VDC)
  • Includes mic clip and zipper pouch

RODE Broadcaster Specs


Microphone

Form FactorLarge Diaphragm Mic / Stand/Boom Mount
Intended Sound SourcesSpeech/Voice Over
Sound FieldMono
Operating PrinciplePressure Gradient
CapsuleCondenser
Diaphragm1" / 25.40 mm
Polar PatternCardioid
PadNone
Tone AdjustmentNone
Gain AdjustmentNone
WindscreenBuilt-In

Performance

Frequency Range20 Hz to 20 kHz
Maximum SPL128 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Impedance40 Ohms
Sensitivity-34 dBV/Pa at 1 kHz
Output Level2 dBu (Max, 1 kHz)
Dynamic Range114 dB A-Weighted
Signal-to-Noise Ratio80 dB A-Weighted
Equivalent Noise Level14 dB SPL A-Weighted

Connectivity

Headphone ConnectorNone

Power

Bus PowerNone
Operating Voltage24 V (Phantom Power)
48 V (Phantom Power)
Operating Current Consumption5 mA (Phantom Power)

Physical

ColorStainless Steel
MountingMic Clip/Stand Adapter (Included)
Included CaseZipper Pouch
Included FiltersNone
Construction MaterialStainless Steel
DimensionsH: 2 x W: 2.6 x L: 6.6" / H: 50 x W: 65 x L: 167 mm
Weight1.3 lb / 577 g

Packaging Info

Package Weight2.015 lb
Box Dimensions (LxWxH)10.7 x 5.3 x 2.4"

In the Box

  • RODE Broadcaster Large-Diaphragm Cardioid Condenser Microphone
  • 5-Pin "On-Air" Indicator Adapter
  • 2 Year Manufacturer Warranty
    Registration Extension: 9-Year

Not in the Box

  • Essential

No posts found

Write a review
RODE Broadcaster Large-Diaphragm Cardioid Condenser Microphone

The answer to your request will be sent to your email address.

Similar products

  • Low stock
  • Video
741.18
  • Low stock
  • Video
40.80