The Samson CL7a is a large-diaphragm condenser microphone well suited for home, project, and pro-level studios alike. This mic offers a cardioid polar pattern that facilitates greater degrees of isolation during recording whatever you put in front of the mic will be captured, and elements to the sides and rear of the mic will be minimized.
The capsule provided here measures 1.1" in diameter, is sputtered in gold, and offers a 3-micron-thick design to give you a balanced, yet lush sound. With a wide frequency response measuring 20 Hz to 20 kHz, the CL7a can help you capture a panoply of instruments and vocals, and a subtle lift around 15 kHz gives you a feeling of air.
The CL7a provides a 10 dB pad for better miking drums. A 12 dB/octave high-pass filter can be switched on at 100 Hz to reduce rumble and wind noise. The mic requires phantom power to operate and can accept between 36 and 52V. The capsule offers an internal shockmount for both protection and isolation from any noise caused by vibrations.
EAN: 809164025627
Samson CL7a Specs
Microphone Type | Stand/Boom Mount |
Element Type | 1x Condenser |
Polar Pattern | Cardioid |
On-Board Controls | High-Pass Filter, Pad |
Frequency Range | Cardioid Condenser: 20 Hz to 20 kHz |
Maximum SPL | Cardioid: 147 dB SPL |
Analog Output | 1x XLR 3-Pin Male (on Mic) |
Microphone
Microphone Type | Stand/Boom Mount |
Sound Field | Mono |
Element Type | 1x Condenser |
Polar Pattern | Cardioid |
Orientation | Side Address |
Circuitry | Solid-State |
Pad | -10 dB |
High-Pass Filter | 100 Hz, 12 dB/Octave |
On-Board Controls | High-Pass Filter, Pad |
Performance
Frequency Range | Cardioid Condenser: 20 Hz to 20 kHz |
Maximum SPL | Cardioid: 147 dB SPL |
Connectivity
Analog Output | 1x XLR 3-Pin Male (on Mic) |
Power
Operating Voltage | 36 to 52 V (Phantom Power) |
Packaging Info
Package Weight | 1.49 lb |
Box Dimensions (LxWxH) | 10 x 4.2 x 2.6" |
In the Box
- Samson CL7a Large-Diaphragm Studio Condenser Microphone
- Swivel Stand Mount
- 2-Year Manufacturer Warranty
No posts found