Samson Q9U XLR/USB Dynamic Broadcast Microphone Kit with Thronmax XLR-Cabled Boom Arm

Bundled together for your convenience, this Samson Q9U Kit combines two essential items for content creators to make their content creation experience as breezy and efficient as possible. First, the kit includes a broadcast-style dynamic microphone, with both USB and XLR connections. Secondly, a boom arm for mounting the mic to your desk is also included. The boom arm features a C-clamp and an XLR cable already threaded through for your convenience.

Samson Q9U XLR/USB Dynamic Broadcast Microphone

If you re a podcaster looking for professional end-address microphone that will work with both USB and traditional analog setups, look no farther than the Samson Q9U, a microphone with USB-C and XLR outputs to bolster its versatility. Use this mic for your own solo podcasts, and take it with you whenever you re doing an interview or a panel.

Either way, you ll appreciate the built-in shockmount that keeps the mic free from handling noise. You ll also be sure to value the integrated pop filter that fights against p-pops and plosives as well as the on-board tonal controls for tailoring the mic to your particular voice. A USB cable is included so you can get up and working right away. A foam windscreen is also included to reinforce the integrated windscreen.

Pro-Grade Capsule

The dynamic capsule with neodymium magnet provides plenty of output to work with any mixer or audio interface without the need for any external gain devices. A wide frequency response and large dynamic range capture the nuance and natural sound of speech and music performances. An advanced humbucking coil reduces the pickup of electromagnetic (EMI) and radio-frequency interference (RFI) as well as hum from other equipment.

For Your Setup, Whatever It Is

With its XLR and USB-C outputs, the mic will work with mac and windows computers over USB, or with any audio interface, mixer, or preamp. Anywhere you need to use a broadcast-style, end-address microphone, you can.

Useful Appointments

The Q9U has a built-in dual-layer windscreen to filter out plosives and p-pops, so you won t get any distortion when you say words like " plosives" or " p-pops." The mic also comes with an integrated mounting system that keeps your audio unperturbed by unwanted handling noise.

Cardioid Polar Pattern for the Untreated Room

The microphone makes use of a directional cardioid polar pattern to minimize off-axis sound. This polar pattern naturally, yet effectively tamps down room tone and focuses the audio capture on what s directly in front of the mic. Depending on your particular room, you may still need a little room treatment, or some noise-reduction software, to address issues such as your computer s hum or your air conditioner, but the chances of that are markedly lower with a cardioid polar pattern.

Built-In Monitoring

Use the built-in 3.5mm jack to monitor audio straight from the mic over your headphones.

Useful Controls

With low-cut and mid-presence controls, the Q9U can filter out rumble and give your voice the midrange bump it needs to stand out. A mute button will handily silence both the USB and the XLR outputs.

Professional Audio Capture

This USB mic boasts a 96 kHz/24-bit converter, one made by one of the best hardware DSP companies in the business. You ll be able to record audio with the same specifications of a professional recording studio.

Driverless Setup

The Q9U requires absolutely no drivers to run out of the box. Just plug it in to your computer and you should be good to go.

EAN: 809164026235

Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable

The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It s ideal for broadcast, voiceover, and podcasts.

The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8" -27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360° , the BAI-2X allows for precise microphone placement.

The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp s slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.

Versatile

Ideal for studios as well as home use

Internal Springs

Internal springs provide smooth, noise-free positioning and clean and sleek profile

Sturdy

Supports microphones up to 5 lb / 2.27kg

Compatibility

The 5/8" -27 standard microphone thread is compatible with most shockmounts and microphone clips

Precision

Extends up to 40" / 101.6cm and rotates 360° allowing for precise microphone placement

XLR Cable

The integrated 15-foot XLR cable provides a secure, locking connection and excellent signal transfer

Extra Height

A 14" / 13.6cm riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitors

Combo Mount

The heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3" / 5.8cm thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws

14" Riser

The included riser adds 14" / 13.6cm of height to the broadcast arm so that it can easily extend over computer or studio monitors

EAN: 847628578272