sE Electronics X1 S Studio Bundle Condenser Microphone Vocal Recording Package with Reflection Filter

The metal-bodied X1 S delivers a 20 Hz to 20 kHz frequency response and a selectable 80 Hz or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 dB or -20 dB pad minimizes distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 S can handle a maximum SPL of 140 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.

The X1 S utilizes a handcrafted condenser capsule, meticulously constructed and tuned in SE s capsule room by technicians with decades of experience

Its internal redesign allows for improved sensitivity, dramatically increased SPL handling (up to 160 dB), and a large reduction in self-noise

The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques

Selectable at either 80 Hz or 160 Hz, the two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques

The X1 S s all-metal chassis provides efficient rejection of electrical interference and noise

A gold-plated XLR connector ensures loss-free, reliable signal connection

sE Electronics RF-X Reflexion Filter X (Gray)

EAN: 819032010013

The gray sE Electronics RF-X Reflexion Filter X is a budget-friendly solution for vocalists, podcasters, and narrators who need to reduce unwanted room ambience while recording in untreated acoustic environments. This reflection filter merges technology from the upscale Reflexion Filter PRO with a lightweight body and an easy-to-use clamp assembly.

It features a four-layer acoustic filter design to effectively impede room reflections and keep sound coloration to an absolute minimum. The RF-X clamp assembly s lightweight design can be used on almost any microphone stand while allowing the position of your mic to be adjusted horizontally without ong your mic stand or the RF-X. Thanks to the L-bracket, you can also adjust the height of the RF-X.

Technology from Reflexion Filter PRO

Using the same design technology as the industry-standard Reflexion Filter PRO, the RF-X was conceived to answer the needs of the discerning recording artist working on a budget. With its lightweight vented body and an efficient redesigned clamp assembly, the RF-X is simplicity itself, providing stellar performance and ease of use.

Specialized Design

New materials have been developed to make the RF-X lighter than its predecessors while maintaining its durability, helping to position the RF-X as a versatile product suited for any challenging working environment. It features a four-layer acoustic filter design comprised of the outer vented composite panel, a wool fabric layer, an air gap layer, and an inner acoustic foam layer.

Minimal Sound Coloration

This multilayer design differentiates the RF-X from typical designs by filtering frequencies evenly across the whole spectrum, helping to ensuring that recordings exhibit almost zero sound coloration when using the filter.

Assembled by Hand

Just like the RF Pro and RF SPACE, each RF-X is assembled by hand in the sE factory.

sE Electronics Isolation Pack - Shock Mount and Pop Filter for Magneto, X1 & sE 2200a II Series

EAN: 819032010112

The sE Electronics Isolation Pack is a quick-release shock mount that is designed specifically for the Magneto, X1 Series (sE X1, X1 Vocal Pack and X1 Studio Bundle) and sE 2200a II series (sE2200a II MP and sE2200a II C) of microphones. It can be used by professionals and amateurs alike to capture vocals free of pops caused by vocal plosives and low end rumble and noise caused by unwanted vibrations.

Pop shield features metal as opposed to a fabric shield for durability