Bundled for quality speech capture and playback monitoring in mobile podcasting and vlogging, this Kit features the Polsen MO-IPL2 Lightning Lavalier Microphone and the Shure SE215 Sound-Isolating Earphones. No driver installation or batteries are required just clip the mic to your clothing, connect the microphone s attached cable to the Lightning port on your iPhone or iPad, and plug the earphones into the mic s built-in headphone jack.
Note:
The MO-IPL2 is for recording applications only. It is not meant to replace wired or Bluetooth earphones with integrated microphones that are commonly used for phone calls, video chats, and FaceTime.
Polsen MO-IPL2 Lavalier Microphone with Lightning Connector and Headphone Jack for iOS Devices
The Polsen MO-IPL2 is a lavalier condenser microphone designed to deliver accurate speech capture for podcasting, vlogging, video, television production, interviews, and public address. It features an Apple MFi“ certified Lightning connector for compatibility with a iPhones and iPads. The 3.5mm stereo mini-jack output, though disabled during recording, allows easy headphone monitoring of the playback signal. The MO-IPL2 s electret condenser element produces a 20 Hz to 20 kHz frequency response, which is honed to complement the sound of the human voice. The omnidirectional polar pattern ensures responsive sound pick-up from all directions while avoiding the bass boost caused by proximity effect.
No batteries or power supplies are required. Simply connect the MO-IPL2 to your compatible iOS device for immediate operation. An integrated 16-bit / 44.1 kHz analog-to-digital converter delivers enhanced fidelity and less noise when compared to your device s internal A/D converter. Affix the supplied windscreen to reduce wind noise, breath noise, and plosives. The 5.25 cable is insulated to inhibit radio-frequency interference and handling noise, yielding a clean audio output signal. Use the tie clip to attach the mic to your subject s clothing lapels and collars are commonly used. For convenience in storage and transport, the MO-IPL2 comes with a carry pouch.
Note:
The MO-IPL2 is for recording applications only. It is not meant to replace wired or Bluetooth earphones with integrated microphones that are commonly used for phone calls, video chats, and FaceTime.
iOS Device Compatible
Thanks to the Apple MFi“ certified Lightning connector, the MO-IPL2 operates via a single connection to the Lightning port of your compatible iPhone, iPad, or iPod adapters, third-party cables, batteries, and power supplies are unnecessary. The MO-IPL2 s sensitivity and impedance are tuned specifically for iOS devices, ensuring optimal performance.
Omnidirectional Polar Pattern
By utilizing an omnidirectional polar pattern, the MO-IPL2 is able to capture sound from all around it. Its 360° of responsiveness maximizes consistency in volume even when the subject turns away from the mic. It also eliminates the proximity effect that can occur when the mic is too close to the talent.
Vocal-Tailored Frequency Response
The electret condenser capsule s wide frequency response of 20 Hz to 20 kHz is customized to complement the human voice. Whether recording in the field or working with an audience indoors, the tone and dynamic range of the MO-IPL2 yield an accurate and natural sounda clear upgrade from internal mics in mobile devices.
Easy Playback Monitoring
Instead of listening to the playback through the little internal speaker of your iOS device, connect your headphones to the MO-IPL2 s built-in 3.5mm stereo mini jack and listen to the playback with full stereo sound. Once you ve finished recording, you don t have to disconnect the MO-IPL2, just plug in your headphones and listen to the playback.
Integrated Analog-to-Digital Converter
The MO-IPL2 features an integrated analog-to-digital converter that outputs digital signal at 16-bit / 44.1 kHz resolution. This bypasses the need for an external ADC and offers improved accuracy over your device s built-in converter.
Low-Noise Insulated Cable
The 5.25 cable is designed to minimize distracting handling noise and rumbling caused by friction between the cable and clothing. Its insulation inhibits radio-frequency interference, which is commonly encountered indoors and outside and is time-consuming to remove from recordings.
Tie Clip and Foam Windscreen
Use the supplied tie clip to securely and inconspicuously attach the mic to clothing for proper on-camera appearances. Handily reduce problematic wind noise and plosives by fitting the included foam windscreen atop the mic capsule.
EAN: 847628008441
Shure SE215 Pro Sound-Isolating Earphones (Clear)
Well suited to both general music listening and in-ear monitoring applications, the clear SE215 Pro Sound-Isolating Earphones from Shure offer remarkable sound quality in a lightweight and affordable package. Each earpiece offers a single high-definition dynamic MicroDriver engineered to deliver clear, natural audio with deep bass. The in-ear design effectively reduces ambient noise by as much as 37 dB, providing a detailed soundstage for a rich and lifelike listening experience.
The 46" detachable cable has formable wires that fit over the ears to stay out of the way, whether you re listening onstage or at home. The cable features MMCX earpiece connectors with a snap-lock mechanism that enables 360° rotation for a comfortable fit, while the standard 3.5mm connector provides wide compatibility with mobile devices, laptops, music players, IEM receivers, and more. A personalized fit kit with multiple types and sizes of eartips is included to ensure that you get the most comfortable fit and best sound isolation possible. A soft carrying case is included for transport and storage.
A single dynamic MicroDriver in each earpiece delivers clear, natural audio with a 22 Hz to 17.5 kHz frequency response for a rich, lifelike listening experience
The lightweight, ergonomic design provides hours of comfortable listening
Formable wires fit over the ears to stay out of the way, whether you re listening onstage or at home
A personal fit kit is included featuring a variety of eartips, so you can get just the right fit to reduce ambient noise by up to 37 dB and increase bass response
The detachable cable features MMCX earpiece connectors with a lock-snap mechanism that enables 360° rotation for a comfortable fit
The 3.5mm connector provides wide compatibility with a variety of smartphones, mobile devices, laptops, and more
A soft carrying case is included for storage and travel
EAN: 042406196956
Polsen MO-IPL2 Lavalier Microphone with Lightning Connector and Headphone Jack for iOS Devices Specs
Microphone
Form Factor | Lavalier |
Intended Sound Sources | Speech/Voice Over |
Sound Field | Mono |
Capsule | Electret Condenser |
Polar Pattern | Omnidirectional |
Windscreen | Foam (Included) |
Performance
Frequency Range | 20 Hz to 20 kHz |
Sensitivity | -30 dB at 1 kHz |
Connectivity
Analog Output | None |
USB & Digital Output | 1 x Lightning Male |
Headphone Output | 1 x 1/8" / 3.5 mm |
Cable Length | 5.3` / 1.6 m |
Digital Audio
A/D Conversion | 16-Bit |
Sample Rate | 44.1 kHz |
Power
Bus Power | Lightning |
Operating Current Consumption | 40 mA |
Physical
Color | Black |
Mounting | Alligator Clip (Included) |
Included Case | Pouch |
Included Filters | None |
Dimensions | °: 0.3 x L: 0.6" / °: 0.8 x L: 1.5 cm |
Weight | 1.3 oz / 36.8 g |
Packaging Info
Package Weight | 0.225 lb |
Box Dimensions (LxWxH) | 6.1 x 4.35 x 1.3" |
Shure SE215 Pro Sound-Isolating Earphones (Clear) Specs
Headphone
Earpiece Design | In-Ear (Intra-Aural), Closed-Back |
Earpiece Connection / Wearing Style | Wired |
Driver Type | Dynamic |
Number of Drivers | 1, per Earpiece |
Impedance | 17 Ohms |
Active Noise Cancellation | No |
Performance
Frequency Response | 22 Hz to 17.5 kHz |
Sensitivity | 107 dB SPL/mW at 1 kHz |
Wired Connectivity
Audio Connector to Source | 1 x 1/8" / 3.5 mm TRS Right-Angled |
Adapter (Included) | None |
Cable Design | Y-Type |
Audio Connector to Earpiece | 2 x MMCX |
Cable Length | 3.81` / 1.16 m |
Cable Color | Clear |
Color | Clear |
Environmental Protection | None |
Weight | 1.1 oz / 30 g |
Packaging Info
Package Weight | 0.325 lb |
Box Dimensions (LxWxH) | 7.85 x 3.15 x 2.05" |
In the Box
- Tie Clip
- Foam Windscreen
- Carry Pouch
- 2-Year Manufacturer Warranty
- Detachable Cable
- 3 x Pairs of Flex Sleeves (S/M/L)
- 3 x Pairs of Black Foam Sleeves (S/M/L)
- Carrying Case
- 2-Year Manufacturer Warranty
No posts found