The Royer Labs R-121 Matched Pair Ribbon Microphone Bundle with Two RSM-SS1 Sling-Shock Shockmounts pairs two of these warm sounding ribbon microphones with two specially designed shockmounts that isolate the mics from vibrations without the use of elastic bands.
Royer Labs R-121-MP Studio Ribbon Microphones (Nickel, Matched Pair)
If you re a studio engineer, the R-121-MP from Royer Labs probably needs no introduction: this is the matched pair of studio ribbon microphones that put ribbon microphones back on the map again. Where ribbon microphones were always prized for their sound but considered largely finicky, the R-121 is equally prized for its sound and is about as durable as a ribbon microphone can be.
The mic is known for its warm and natural sound, free from the hyped-up high-end usually associated with condenser mics. It s perfect for anything from vocals to drum rooms to guitar amps to symphonic/choral sections. With its figure-8 polar pattern, it can pick up sound equally from behind or in front of the capsule. The R-121 boasts high SPL handling for close capturing of instrument cabinets, drums, and other transient-rich sources without noise and distortion.
Rugged Design
The R-121 delivers the performance you d expected of a top-quality ribbon microphone, but with the added benefit of not breaking when you mic a sound with a high SPL. There are no internal active electronics to overload or produce distortion up to maximum SPL rating, which is quite high indeed. Furthermore, the ribbon element is not affected by heat or humidity.
Transparent Audio Reproduction
Exhibiting almost no noise of its own, the mic is completely absent of high-frequency phase distortion, and it gives you a consistent frequency response regardless of your distance from the mic. All of this means one thing: an exceedingly transparent audio reproduction.
Great for a Variety of Sources
You can use this mic on almost everything. It excels on electric guitar amps, brass instruments, horn sections, all woodwind or symphonic instruments, drum rooms, overheads, kick drums, and more.
EAN: 899060002211
Royer Labs RSM-SS1 Sling-Shock Microphone Shockmount
The Royer RSM-SS1 Sling-Shock Microphone Shockmount is a matte black microphone mount featuring a suspension design and a two-part mechanism consisting of non-resonant nylon cord and damped tensioning-springs. The suspension design (free of elastic bands, bungee cords, and synthetic bushings) reduces induced distortion by eliminating unwanted vibration and random low-frequency disturbances. The RSM-SS1 features an adjustable grip with a felt-lined interior the grip keeps the microphone in place while protecting its finish.
The RSM-SS1 Sling-Shock is compatible with Royer R-121, R-122 MKII, R-122V, and SF-12 microphones as well as other cylindrical microphones measuring approximately 1" in diameter.
EAN: 850035900208
Royer Labs R-121-MP Studio Ribbon Microphones (Nickel, Matched Pair) Specs
Microphone
Form Factor | Stand/Boom Mount |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Ribbon |
Polar Pattern | Figure-8 |
High-Pass Filter | None |
Performance
Frequency Range | 30 Hz to 15 kHz |
Maximum SPL | 135 dB SPL |
Impedance | 300 Ohms at 1 kHz |
Load Impedance | 1500 Ohms |
Sensitivity | -47 dBV/Pa |
Physical
Color | Nickel |
Mounting | Shockmount |
Dimensions | °: 1 x L: 6.1" / °: 25 x L: 155.7 mm |
Weight | 8.61 oz / 244 g |
Packaging Info
Package Weight | 6.9 lb |
Box Dimensions (LxWxH) | 18.4 x 18.1 x 6.6" |
Royer Labs RSM-SS1 Sling-Shock Microphone Shockmount Specs
Physical
Compatible Microphone Models | Royer Labs: R-121, R-122, R-122V, SF-1, SF-12 |
Mounting | 5/8"-27 |
Material of Construction | Brass |
Dimensions | 4 x 4 x 4" / 10 x 10 x 10 cm |
Weight | 7 oz / 198.4 g |
Packaging Info
Package Weight | 0.98 lb |
Box Dimensions (LxWxH) | 5.05 x 4.95 x 3.75" |
In the Box
- Protective Wood Box
- Microphone Sock
- Documentation
- 2-Year Manufacturer Warranty (Ribbon)
- 2-Year Manufacturer Warranty
Not in the Box
- Essential XLR Cables (Not Included)
No posts found