Azden SGM-250P Shotgun Microphone with Shockmount, Windshield, and XLR Cable Kit (Phantom Only)

This Azden SGM-250P Kit from provides all the elements needed to securely mount and connect the included SGM-250P shotgun mic to a professional camera with an XLR audio input.

The kit includes a universal shockmount, a short right-angled XLR mic cable, and a furry windscreen to create a run & gun camera rig for indoor/outdoor events including news, sports, and more.

Azden SGM-250P Shotgun Microphone (Phantom Only)

The Azden SGM-250P is a shotgun microphone that is powered via phantom power only for use with professional cameras and recorders. Specifically tuned to preserve the natural qualities of a speaking subject, the mic provides video creators with a cost-effective solution for mobile journalism, run & gun, and documentary applications.

The SGM-250P features a 20 Hz to 20 kHz frequency response and a two-step low cut filter. The mic is built with a rugged all-metal barrel and has tightly spaced vertical slots along the tip to provide side and rear rejection. Measuring about 8" in length, the SGM-250P is easily kept out of frame in boompole applications and is suitable for almost any filming situation.

The mic is equipped with a gold-plated XLR output, and comes with a shoemount holder, a foam windshield, and a zippered carrying case.

A Variety of SGM-250 Models to Suit Your Specific Application

SGM-250

• For use with either a DSLR/mirrorless camera (XLR to 3.5mm adapter cable required) or with a professional camera or recorder with an XLR input (XLR cable required)
• Powered via one AA battery or phantom power

SGM-250CX

• For use with professional cameras and recorders equipped with an XLR input that supplies phantom power
• Powered via phantom power only
• Comes equipped with a shockmount for camera mounting and a hardwired 13" output cable with an XLR connector

SGM-250MX

• For use connected to the mini-XLR mic input of Blackmagic Pocket Cinema cameras
• Powered via phantom power only
• Comes equipped with a shockmount for camera mounting and a hardwired 13" output cable with a mini-XLR connector

EAN: 095528622513

Auray DUSM-1 Universal Shockmount for Camera Shoes and Boompoles

The Auray DUSM-1 Universal Shockmount features a four-point suspension to accommodate shotgun and other cylindrical microphones measuring 0.74-0.98" (19-25mm) in diameter. The shockmount is easily angled with its rubberized adjustment knob. There is a built-in shoe for camera mounting, and a 3/8" -16 thread connection at the base mounts the shockmount to boompoles and universal handgrips.

EAN: 847628562776

Kopul Premium Performance 3000 Series Neutrik XLR M to Angled XLR F Microphone Cable (1.5 , Black)

The black Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable (1.5 ) is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and to provide protection against EMI, RFI, and static noise.

Premium Performance 3000 Series cables are made from 24 AWG OFC copper wire that s wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.

95% dual-spiral shielding offers protection from EMI and RFI noise.

Twin-conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable s signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable s core.

24 AWG oxygen-free stranded copper inner core provides the best possible conductivity.

Cotton yarn reduces electrostatic and microphonic noise.

All solder points shrink-wrapped for protection.

Neutrik XX silver connectors offer high conductivity.

Caged type contact and improved ground contact.

EAN: 847628558229

Auray Professional Windshield for Shotgun Microphones (4.7" )

The Auray WSS Series Professional Windshields deliver superior 360° wind protection with acoustic transparency. They are engineered for dramatic reduction of unwanted broadband wind noise and vocal pops with very little high frequency loss, for exceptionally accurate recordings.

This WSS-2012 Professional Windshield has an inside depth of 12cm and is designed for use with many shotgun microphones. It features a specially manufactured open-cell foam matrix surrounded by a layer of 25mm thick simulated rabbit fur. This diffusion technology lowers wind velocity in a controlled air space around the microphone, thereby reducing wind noise without muffling the sound. It also features an airtight tapered rubber base that seals out wind from the rear of the microphone, greatly improving isolation and rear wind protection.

When used on a shotgun microphone, this slip-on windshield is effective in minimizing wind noise and plosive sounds. It is most effective in light breeze to strong breeze conditions (4 to 25 mph) and users can generally expect a 24 to 40 dB reduction in wind noise with negligible dampening of high frequencies.

In addition to superior 360° wind protection, the WSS-2012 helps prevent moisture and dirt from damaging your microphone. The windscreen is designed to fit microphones from Audio Technica, Sennheiser, Sony and others.

The WSS-2012 Professional Windshield for Shotgun Microphones is an advanced solution for outstanding wind protection with acoustic transparency. It fits microphones ranging from 0.75 to 0.9 inches in diameter.

Compatibility

Audio-Technica BP4073, AT875R, AT 877, MC-230

Azden SGM-PD2

Ikegami HL DNS-201W, HL DV-7W, HLV 9, 55, 77, MC-10, 11, 230

Panasonic AJ HDC 27, AJ HDX 900, AJ MC 700P, 900P, AJD-700, 800, 910, DV 200, DVC200

Schoeps CMIT 5U

Shure VP82

Sennheiser MKH-8060, MKE-600

Sony ECM 673, 674, ECM NV1 (Camera Mic for BVP-550, 570, 950, DSR 130P, 200, 250, 300, PD150, 170, HVR A1U, V1, UVW-100)

Zoom SGH-6 (Capsule for H6)

EAN: 847628552708