Movo Photo iVlog5 Director's Smartphone Video Vlogging Bundle

Movo Photo WMX-1-DUO 2-Person Wireless Lavalier Microphone System (2.4 GHz)

For vloggers, YouTubers, and mobile journalists looking to upgrade from the built-in microphone on their camera or smartphone to a quality two-person wireless lavalier mic system on a tight budget, the Movo Photo WMX-1-DUO presents a great combination of affordability and simplicity whether shooting with a DSLR/mirrorless camera or a mobile device.

With no menus to navigate, no channels to set, and no complicated settings to configure, the WMX-1-DUO s user-friendly operations can get you going in a matter of moments. Plus, features such as real-time headphone monitoring and dedicated mic and line inputs— options normally only found on much more expensive systems— empower you with extra versatility for more demanding projects.

All you need to provide is some AAA batteries the WMX-1-DUO comes with everything else necessary to start recording clear, intelligible speech to your camera or smartphone. It includes two bodypack transmitters— each with a clip-on lavalier microphone and a windscreen, a dual-channel receiver with a belt clip and a shoe mount, multiple audio cables, and a hard case to carry the whole system.

Unboxing the WMX-1-DUO

Since each transmitter comes with a belt clip, it can easily be attached to the subject s clothing or costume. Being ultracompact and lightweight, it won t be a bother to the talent. It offers separate mic and line inputs that enable proper connection of a microphone or a line-level source such as a camera feed.

The equally ultracompact dual-channel receiver can accommodate up to two transmitters at the same time, making it a capable device for one- or two-person shoots. It includes a belt clip and a shoe mount so you can place it on you or your camera rig, plus TRS and TRRS audio cables to allow proper hookup to your camera (via TRS) or smartphone (via TRRS).

Along with each clip-on lavalier microphone, you get a windscreen that s designed to reduce noise from light wind, breaths, and rustling of clothes. The mic s omnidirectional polar pattern ensures consistent voice pickup even if the mic isn t pointed directly at the subject.

Simple Setup

Don t worry about frequency scanning or manual channel assignments, the receiver and transmitter only need to be paired. Once that straightforward process is done, the system is ready to go.

Two AAA batteries power each transmitter/receiver for up to six hours of run time. Rather than having to recharge batteries between gigs, just swap drained batteries for fresh ones.

The receiver features volume buttons, which allow you to adjust the signal level of the receiver s output to achieve a proper, distortion-free recording level on your camera or smartphone.

Connect a pair of headphones to the receiver s dedicated 3.5mm headphone jack to experience real-time monitoring of your audio signal.

2.4 GHz Digital Wireless

The WMX-1-DUO utilizes 2.4 GHz digital technology to provide simple and reliable wireless signal. 2.4 GHz systems require no special license, so you can use the WMX-1-DUO anywhere in the world.

By operating in the 2.4 GHz frequency spectrum, the WMX-1-DUO avoids interference from commonly used UHF and VHF wireless mic systems. Keep the WMX-1-DUO away from heavy Wi-Fi and 2.4 GHz traffic for optimal performance.

With line-of-sight communication between the transmitter and receiver at a maximum distance of 200 feet, you can record your subject and get the right shot with confidence.

General Features

• Ultracompact, lightweight housings with detachable belt clips
• Supplied shoe mount allows the receiver to be attached to a camera
• Bicolor LED on each transmitter and receiver indicates sync status and low-battery warning
• Receiver outputs a mono signal (summed mono when using two transmitters) from its 3.5mm line and headphone output ports
• Up to six hours of operating time via AAA batteries (available separately)
• Includes 3.5mm TRS cable for connection to a camera
• Includes 3.5mm TRRS cable for connection to a smartphone or tablet outfitted with a 3.5mm headphone jack
• Includes hard carrying case for easy transport of the system

EAN: 817711021701

Movo Photo VXR10 PRO Ultracompact Camera-Mount Shotgun Microphone

Vloggers, mobile journalists, and run-and-gun videographers will appreciate the simple operation and quality sound of the Movo PhotoVXR10 PRO, an ultracompact, camera-mount shotgun microphone for DSLRs, mirrorless cameras, camcorders, smartphones, tablets, or portable audio recorders. This microphone plugs directly into your device through its 3.5mm connection. No batteries are required, and no settings need to be configured to get the mic to operate— just plug it in and it works.

This mic is the pro version of the VXR10. Compared to the standard VXR10, the VXR10 PRO sports higher sensitivity, increased signal-to-noise performance, extended frequency response, and a more directional supercardioid polar pattern that enables an enhanced and focused audio capture. All of these facets result in a more polished, professional sound. The VXR10 PRO includes TRRS and TRS cables, a Rycote detachable shockmount, a foam windscreen, a furry windshield, and a carrying case.

Works with Multiple Devices

Use this microphone with DSLR/mirrorless cameras, smartphones, and audio recorders. Whether the device sports a TRS or TRRS connection, the necessary cable is included, as is a furry windscreen for getting a great sound outdoors, and a shoe shockmount from Rycote to reduce handling noise.

Easy to Use

This tiny microphone attaches to the included shoe shockmount, which in turn mounts on your device s shoe mount. It connects over a 3.5mm cable, either TRS to devices such as DSLR cameras, or TRRS to compatible smartphones. It s powered by the device, and requires no menu-diving to setup. Once you make the connection, you re simply good to go.

More Luxurious Sound Compared to Standard VXR10

The VXR10 PRO offers a higher sensitivity (-36 dB), a wider frequency response (20 Hz to 18 kHz), and sharper directionality when compared to t the standard VXR10.

Built-In Monitoring

The mic houses a dedicated 3.5mm headphone port, enabling easy monitoring of the audio signal without disturbing the main output connection.

EAN: 817711022265

Movo Photo MV-T1 Aluminum Alloy Tabletop Tripod

The multipurpose, 1-section MV-T1 Aluminum Alloy Tabletop Tripod from Movo Photo includes a mini ball head that has an 11 lb load capacity and a 2-section extension pole that extends the tripod from 3" to a maximum height of 16" . Cameras mount to the top of the head via its 1/4" -20 threaded camera mount, and the single-action ball head s lever can be disengaged for you to control the movement of the ball and the 360° rotation of the head at the same time.

EAN: 817711021183

Movo Photo PR-3 Rotating Smartphone Tripod Mount with Built-In Levels & Hand Grip

Many people use their smartphone for mobile photography and videography, and with the PR-3 Rotating Smartphone Tripod Mount with Built-In Levels & Hand Grip from Movo Photo, you can ensure that your shots are always lined up. The mount features two built-in bubble levels, one vertical and one horizontal. You get both because the mount can be positioned in a variety of ways on a (optional) tripod, monopod, or the included hand grip, thanks to three 1/4" -20 threaded connections. With the padded grip, out of the box you can use this mount for smooth handheld shots or more secure and comfortable selfies.

Mount Accessories

Two cold shoes are integrated into the mount for optional accessories, such as a microphone or LED light.

Smartphone Compatibility

The smartphone holder can expand to accommodate phones from 2.1 to 3.7" in width, and the mount can rotate 360&de