RODE NTG4+ Shotgun Microphone and Auray Windshield Kit

Ideal for film shoots and sound design in outdoor locations, this Kit features the Rode NTG4+ battery-/phantom-powered shotgun microphone and an Auray windshield. The windshield delivers 360° wind protection and 24 to 40 dB of wind-noise reduction with minimal impact on high frequencies, giving you a cleaner sound when shooting in windy conditions. Simply slip it over the NTG4+ and you re ready for the outdoors.

RODE NTG4+ Shotgun Microphone

Customize your tone and capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG4+ battery- or phantom-powered shotgun microphone. Specialized features such as low-noise circuitry, digitally switchable pad and frequency settings, and minimal handling noise reduce the need to repair and restore audio in post production.

The elevated sensitivity of the NTG4+ allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG4+ delivers warm sound due in part to its gentle dip in high frequencies and its rumble-reducing selectable low-cut filter. A switchable treble boost is on hand for situations where additional clarity is needed.

Quality Sound Capture

The combination of the 10.9" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 16 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

Internal Battery or Phantom Powered

Operate the NTG4+ on 48V phantom power or via its internal rechargeable lithium battery, which provides up to 150 hours of run time. The micro-USB port and supplied USB cable enable easy recharging in just two hours charge the NTG4+ via a computer, power brick, or vehicle. Thanks to its 3-pin XLR output, the NTG4+ is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.

Customizable Tone via Digital Switching

Digital switching not only allows for intuitive access to the mic s settings, but it also retains their states when the mic is switched off. Activate the 75 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic. Use the +6 dB treble boost for enhanced clarity and intelligibility (best for environments with minimal high-frequency ambient noise). When loud sound sources threaten to distort your recording, switch on the -10 dB pad to attenuate the input level.

Ideal for Boompole Mounting

The lightweight, metal-bodied NTG4+ includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG4+ in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.

Windscreen Minimizes Wind Noise

The NTG4+ has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

EAN: 698813004164

Auray Professional Windshield for Shotgun Microphones (5.5" )

The Auray WSS Series Professional Windshield delivers superior 360° wind protection with acoustic transparency. They are engineered for dramatic reduction of unwanted broadband wind noise and vocal pops with very little high frequency loss, for exceptionally accurate recordings.

This WSS-2014 Professional Windshield has an inside depth of 5.5" and is designed for use with many shotgun microphones. It features a specially manufactured open-cell foam matrix surrounded by a layer of 25mm thick simulated rabbit fur. This diffusion technology lowers wind velocity in a controlled air space around the microphone, thereby reducing wind noise without muffling the sound. It also features an airtight tapered rubber base that seals out wind from the rear of the microphone, greatly improving isolation and rear wind protection.

When used on a shotgun microphone, this slip-on windshield is effective in minimizing wind noise and plosive sounds. It is most effective in light breeze to strong breeze conditions (4 to 25 mph) and users can generally expect a 24 to 40 dB reduction in wind noise with negligible dampening of high frequencies. For most applications, the negligible high-frequency dampening is a worthwhile exchange for the dramatic wind noise reduction.

In addition to superior 360° wind protection, the WSS-2014 helps prevent moisture and dirt from damaging your microphone. The windscreen is designed to fit microphones from Audio-Technica, Neumann, RÃ ¸ de, Sanken, Sennheiser and others.

The WSS-2014 Professional Windshield for Shotgun Microphones is an advanced solution for outstanding wind protection with acoustic transparency.

Fits these and other similar sized microphones:

Audio-Technica AT 835ST (BP4029), AT 897

Neumann KMR 81i

Panasonic WM-L30

RÃ ¸ de NTG-1, NTG-2, VideoMic

Sanken CS 1, CS 2

Sennheiser MKH-60

Sony DXC-637, DXC-D30P

EAN: 847628552692