Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone Deluxe Location Recording Kit

Designed as a complete microphone setup for location recording in film work, broadcasting, electronic news gathering (ENG), and field production applications, this Kit eliminates the guesswork in configuring a shotgun microphone system that delivers pristine quality and low noise for a variety of indoor and outdoor environments.

It features the Sennheiser MKH 416-P48U3 moisture-resistant shotgun microphone, a Rycote Super-Softie windshield, a universal shoe/pole shockmount, a pistol grip, a cabled graphite boompole, a boompole bag, and short and long right-angled XLR cables to provide you with everything necessary for capturing audio for video, film, and sound design applications.

Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone

Achieve superb audio capture in demanding conditions for your next professional film, TV, or location recording with the Sennheiser MKH 416-P48U3 moisture-resistant shotgun microphone. Mix-ready sound quality is provided by its sharp directivity, low noise, and strong output. Plus, there are no controls to worry about the MKH 416-P48U3 delivers the reliability you need for high-pressure gigs.

The microphone exhibits a hypercardioid polar pattern at low to midrange frequencies and transitions to a lobar pattern in high frequencies, allowing it to attenuate 125 Hz to 2 kHz by approximately 10 dB at the 90° off-axis points. Your dialogue, foley, and sound effects can be recorded with full dynamics and clarity, thanks to the MKH 416-P48U3 s wide frequency response, enhanced consonant articulation, and high SPL handling.

Performs in Adverse Environmental Conditions

When your work takes you outdoors, you re bound to encounter humidity and condensation, which can cause many mics to fail. The MKH 416-P48U3 s RF condenser design makes it highly immune to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions.

Professional Sound Quality

The MKH 416-P48U3 was engineered with the experienced professional in mind. Its 40 Hz to 20 kHz frequency response incorporates a gentle rise from 5 to 15 kHz to increase intelligibility, and a natural bass roll-off to mitigate rumble. Its low self-noise of 13 dBA and high sensitivity of -32 dB enable studio-worthy signal purity without requiring noise reduction and gain boosting in postproduction.

Phantom Powered

The MKH 416-P48U3 boasts a transformerless and fully floating balanced output for optimal signal integrity. Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the MKH 416-P48U3 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.

Ideal for Boompole Mounting

The MKH 416-P48U3 s metal body features a matte black finish to prevent distracting visual reflections. Mount the MKH 416-P48U3 directly on a stand or boompole using the supplied MZQ 100 clip. Alternatively, place the MKH 416-P48U3 in the separately available Sennheiser MZS 20-1 combination shockmount, pistol grip, and stand adapter to prevent the transfer of vibrations to the microphone.

Windscreen Minimizes Wind Noise

The MKH 416-P48U3 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in indoor or outdoor environments, consider the Sennheiser MZH 60-1 furry windshield (available separately).

EAN: 615104015111

Auray DUSM-1 Universal Shockmount for Camera Shoes and Boompoles

The Auray DUSM-1 Universal Shockmount features a four-point suspension to accommodate shotgun and other cylindrical microphones measuring 0.74-0.98" (19-25mm) in diameter. The shockmount is easily angled with its rubberized adjustment knob. There is a built-in shoe for camera mounting, and a 3/8" -16 thread connection at the base mounts the shockmount to boompoles and universal handgrips.

EAN: 847628562776

Rycote 18cm Super-Softie Wind Shield for Shotgun Mics (Standard Hole)

The standard hole Rycote 18cm Super-Softie Wind Shield for Shotgun Mics features an aerodynamic shape and surface structure made from the company s 3D-Tex material, which allows for attenuation of wind noise with acoustic transparency. It is ideal for a variety of sound recording applications including video, ENG and more.

The 18cm Super-Softie has no rigid internal structure, thus it causes virtually no polar pattern distortion. It s robust design has been engineered for use in challenging environments, and if it becomes rain-soaked, it can be squeezed out and shaken dry quickly. Also, if it becomes coated with dust it can be rinsed quickly without affecting its performance.

Fits these and similar sized mics:

• AKG C 568 EB
• AKG CK 68 ULS C460B Full
• AKG CK 68 ULS C460B Red
• BeyerDynamic MCE 86 N (C) S
• BeyerDynamic MCE 87vs
• RODE NTG-3
• Sanken CS-3e
• Sennheiser ME 66 K6
• Sennheiser ME 80 K3U
• Sennheiser MKH 416
• Sennheiser MKH 418
• Sony ECM 670
• Sony ECM 678
• Sony ECM 680S

K-Tek KEG-100CC Avalon Series Graphite Boompole with Internal Coiled XLR Cable

The K-Tek KEG-100CC Avalon Series Graphite Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP, and other field recording applications. Its sturdy graphite design is tough enough to endure the rigors of road use while remaining lightweight and travel worthy. This pole features an internally coiled cable and an XLR connection at the base of the pole. A total of 5 sections telescope between 2.2 to 8.8 , and will easily store in any standard equipment case. The captive-collet coupling system locks each section in place for even further reliability.

Designed to fit in any standard equipment case for ENG, EFP, and DV location production work

The KEG-100CC features a bottom-mounted, 3-pin XLR connection at the base

Jam-resistant collar coupling

Unique pole-top design with cable retention slots and replaceable stainless steel mounting stud

EAN: 791090331876

Kopul Premium Performance 3000 Series Neutrik XLR M to Angled XLR F Microphone Cable (20 , Black)

The black Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable (20 ) is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and to provide protection against EMI, RFI, and static noise.

Premium Performance 3000 Series cables are made from 24 AWG OFC copper wire that s wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.

95% dual-spiral shielding offers protection from EMI and RFI noise.

Twin-conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable s signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable s core.

24 AWG oxygen-free stranded copper inner core provides the best possible conductivity.

Cotton yarn reduces electrostatic and microphonic noise.

All solder points shrink-wrapped for protection.

Neutrik XX silver connectors offer high conductivity.

Caged type contact and improved ground contact.

EAN: 847628558298

Kopul Premium Performance 3000 Series Neutrik XLR M to Angled XLR F Microphone Cable (1.5 , Black)

The black Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable (1.5 ) is designed to b