DPA Microphones 3511ES Stereo Kit with 4011ES Cardioid Mics

DPA Microphones 4011ES Cardioid Microphone with Active Side Cable

The 4011ES Cardiod Microphone with Active Side Cable from DPA is designed for capturing audio. It can be used with vocals, close miking instruments, amplifier cabinets, and similar sources in live sound reinforcement and recording applications. The microphone features a cardioid condenser element for minimizing off-axis noise in spot-miking applications, allowing for use in close-miking scenarios and to minimize bleed from other instruments. The 4011ES is powered by 48V of phantom power and offers a frequency range of 20 Hz to 20 kHz. It is capable of handling high SPLs without distortion and uses an MMP preamp with a 12mm XLR cable. A foam windscreen and SM4000-C suspension mount are included.

Cardioid pickup pattern provides maximum separation between sound sources

Equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments, and vocals

Flat on-axis frequency response and phase response

Combine with additional separately sold DPA capsules or preamps for new configuration

DPA Microphones Compact XY/ORTF Stereo Holder

Get the sound you want, by having the right microphone mount and the right mics. DPA designs this Compact XY/ORTF Stereo Holder for advanced sound reproduction. It brings boom sound, mono compatibility, and convenient compatibility with windscreens. In ORTF stereo, use this holder for close miking pianos, overheads for drum kits, orchestras, and ambient sound recordings.

The holder allows you to arrange mics in both a coincident XY stereo configuration as well as in a near-coincident ORTF combined time and intensity difference stereo configuration. It comes with three common international-standard threads to easily secure the holder shaft to a range of microphone stands. DPA delivers extreme quality start here.

DPA Microphones Microphone Shock Mount UA0897

The DPA Microphone Shock Mount UA0897 is designed for use in environments where vibration levels are unusually high. The shock mount features anti-vibration technology that minimizes movement, but does not affect acoustic quality. This unit is ideally suited for stand-mounted use in the studio or hand-held boom applications. This model comes standard with DDS0731 Rubber Mounts for 19mm microphones. It is also fitted with a thread adapter that accepts three of the most popular international standard threads used on microphone stands.

Less Movement, Better Quality

Use this shock mount to reduce vibrations while recording, and improve the acoustic quality of your sound work.

DPA Microphones EXY4000 Extension for Compact Stereo Holder

The DPA Microphones EXY4000 Extension for Compact Stereo Holder is intended for use with compact stereo holders (i.e., the DPA CXY4000 and CXO4000) if rubber suspension is needed.

Rubber Suspension

Intended for use with the CXY4000 and CXO4000 compact stereo holders if rubber suspension is needed, the EXY4000 has a 0.75 outside diameter and fits directly into the UA0897 Shock Mount, the RSM4000 Shock Mount for Windjammer, or the WSM4000 WINDPAC Shock Mount.

DPA Microphones DUA0041 Foam Windscreen for d:dicate Microphones with Active Cable

The DUA0041 from DPA is a foam windscreen for d:dicate microphones with an active cable. It can be used to provide protection against wind and pop noises without attenuating the higher frequencies beyond the tolerance field of the microphone s frequency response. In addition, it protects the mic capsule from moisture.

DPA Microphones SM4000-C Suspension Mount for MMP-C Preamplifier

The DPA Microphones SM4000-C Suspension Mount is designed for compact, reference standard microphones with an MMP-C pre-amplifier. This mount allows the microphone to hang from its cable and then be oriented in any direction desired by bending the holder.

DPA Microphones GM1500 Gooseneck Mount

Meant to be mounted in a piano frame (or any other magnetic surface), the DPA GM1500 Gooseneck Mount is a combination of magnet mount gooseneck and shock mount. Both omni-directional and directional microphones that are compact as well as larger fit this line. Based on the Rycote Lyre suspension system, almost any microphone can be used simply by adding another Lyre rubber piece. The shock mount is extremely flexible, the holders can be mounted facing both upside and downside and the poles can be adjusted by pushing them back and forth. The DAO4010 microphone cable using Mogami compact cable and an ultra slim DPA XLR housing will give an excellent visual elegance, adding only a few millimeters further length to the microphone. Most of the connector will be locked and hidden in the microphone itself.

DPA Microphones MB1500 Magnet Base for Microphone Holder

The MB1500 Magnet Base from DPA Microphones is designed for use with a microphone holder.