The SR25 Gen 2 from Earthworks is a condenser microphone designed specifically for capturing cymbals and hi-hats for live performances and studio recording sessions. The mic's supercardioid pickup pattern provides exceptional rejection of off-axis signal and noise due to room ambiance, instruments, monitor speakers, and similar sources.
The condenser element provides a warm, transparent sonic character with an even 20 Hz to 25 kHz frequency response. The capsule boasts an SPL rating of 148 dB, allowing exceptional reproduction of audio peaks without distortion and overload. The SR25 Gen 2 is powered via 48V phantom power and includes a mic clip, foam windscreen, and storage bag.
New Active Electronics
The internal electronics have been hardened to draw less phantom power and additional protection features have been built in to safeguard against accidental hot swapping. We all know that you shouldn't plug in a condenser microphone with the power engaged but we also know that's an inevitability in the field sometimes. These new stacked changes make the SR25 Gen 2 more robust, more compatible, and more user-friendly.
Staggering SPL Handling
The wide and generous sweet spot makes the SR25 Gen 2 ideal for capturing hi-hats and cymbals. A staggering SPL rating of 145 dB helps to ensure your attack won't distort or overload.
Built for Touring, Used Everywhere
The SR25 Gen 2 hi-hat and cymbal microphone is incredibly versatile and built for live sound reinforcement. It captures all the details of a condenser microphone, but performs with the usability of a dynamic mic. This makes it ideal for streaming and video recordings and also for all studio work environments.
Features at a Glance
- Built for cymbals and hi-hats
- Designed for live stage performances but works equally well for televised productions, worship, and studio recordings
- New machined look
- Even more clarity and presence than the SR25 Gen 1
- High SPL prevents clipping from even the loudest drummers
- Designed for very high gain before feedback
- Tight supercardioid polar pattern
- Balanced, vibrant, and natural sound right out of the box
- Frequency response from 20 Hz to 25 kHz
- Designed, tuned, and assembled in the USA
Earthworks SR25 2ND GEN Specs
Key Specs
| Form Factor | Stand/Boom Mount |
| Element Type | Condenser |
| Polar Pattern | Supercardioid |
| On-Board Controls | No |
| Frequency Range | 20 Hz to 25 kHz |
| Maximum SPL | 148 dB SPL |
| Analog Output | 1x XLR 3-Pin (on Mic) |
| Power Sources | Phantom Power |
Microphone
| Primary Applications | Live Sound, Studio Recording |
| Form Factor | Stand/Boom Mount |
| Intended Sound Sources | Cymbals |
| Sound Field | Mono |
| Element Type | Condenser |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Pad | No |
| High-Pass Filter | No |
| Gain Adjustment | No |
| On-Board Controls | No |
Performance
| Frequency Range | 20 Hz to 25 kHz |
| Maximum SPL | 148 dB SPL |
| Load Impedance | 1000 Ohms |
| Sensitivity | 15.8 mV/Pa |
Connectivity
| Analog Output | 1x XLR 3-Pin (on Mic) |
Power
| Power Sources | Phantom Power |
| Operating Voltage | 48 V (Phantom Power) |
Physical
| Color | Silver |
| Mounting Thread Size | 5/8"-27 Female |
| Construction Material | Stainless Steel |
| Dimensions | ø: 0.86 x L: 4.14" / ø: 21.84 x L: 105.15 mm |
| Weight | 0.25 lb / 0.11 kg |
Packaging Info
| Package Weight | 0.69 lb |
| Box Dimensions (LxWxH) | 9 x 6 x 2.2" |
In the Box
- Earthworks SR25 Gen 2 Supercardioid Condenser Microphone for Hi-Hats & Cymbals (Single Microphone)
- Microphone Clip
- Foam Windscreen
- Storage Bag
- 2-Year Manufacturer Warranty
No posts found
