Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Schoeps CMC6-U 12-48 Volt Phantom Power Supply and Output Stage for Colette Modular Capsules
The Schoeps CMC6-U is a balanced output stage and +12 to +48V phantom power supply for the Schoeps Colette series modular capsules. The transformer-less output stage ensures low-noise and pristine audio reproduction throughout. The CMC6-U is terminated with a standard balanced 3-pin XLR connection for use with standard microphone inputs and preamplifiers.
Schoeps MK4 Cardioid Capsule for CMC Preamplifiers
The Schoeps MK4 is part of the Colette series of modular capsules designed for use with the CMC preamplifiers. The cardioid polar pattern results in maximum rejection of rear incidental audio signal, eliminating off-axis noise and feedback. The cardioid pattern allows microphone placement to occur farther from the sound source than a pressure transducer of equivalent sensitivity. The MK4 is ideal for both speech and music capturing, resulting in rich detail without coloration. The MK4 is also a viable solution for X/Y or Mid-Side stereo recording.
Cardioid Polar Pattern
The cardioid pattern effectively rejects rear and off-axis audio signal resulting in greater signal to noise ratio and feedback rejection.
Excellent Directional Response
The cardioid characteristic allows the MK4 to be placed at further proximities from the signal source without degradation.
Wide Linear Frequency Response
The wide frequency response ensures accurate detail regardless of the source signal.
Schoeps Solid Foam Teardrop Popscreen for Schoeps Colette Series Microphones (Gray)
This gray Solid Foam Teardrop Popscreen from Schoeps is an acoustic foam close-speech popscreen intended for use with Schoeps Colette Series microphones, but compatible with other microphone capsules as well. It provides sufficient protection at normal speaking distances for cardioids and other directional capsules, especially when speech capsules are used. With omnidirectional capsules, it may even be used outdoors in light wind. This popscreen has minimal effect on sound quality.
For moderate distances from the person speaking
Can also be used as a windscreen for pressure transducers
Negligible effect on sound quality
Schoeps SG20 Microphone Stand Clamp
The Schoeps SG20 Microphone Stand Adapter is designed to stand mount microphones measuring 20mm or 21mm in diameter. The SG20 features a strong metal housing and a durable plastic clamp. Its base is threaded for 5/8 -27 stands, and a threaded adapter is included to accommodate 3/8 and 1/2 mounting. The angle is continuously variable.
The Schoeps CMC6-U is a balanced output stage and +12 to +48V phantom power supply for the Schoeps Colette series modular capsules. The transformer-less output stage ensures low-noise and pristine audio reproduction throughout. The CMC6-U is terminated with a standard balanced 3-pin XLR connection for use with standard microphone inputs and preamplifiers.
Schoeps MK4 Cardioid Capsule for CMC Preamplifiers
The Schoeps MK4 is part of the Colette series of modular capsules designed for use with the CMC preamplifiers. The cardioid polar pattern results in maximum rejection of rear incidental audio signal, eliminating off-axis noise and feedback. The cardioid pattern allows microphone placement to occur farther from the sound source than a pressure transducer of equivalent sensitivity. The MK4 is ideal for both speech and music capturing, resulting in rich detail without coloration. The MK4 is also a viable solution for X/Y or Mid-Side stereo recording.
Cardioid Polar Pattern
The cardioid pattern effectively rejects rear and off-axis audio signal resulting in greater signal to noise ratio and feedback rejection.
Excellent Directional Response
The cardioid characteristic allows the MK4 to be placed at further proximities from the signal source without degradation.
Wide Linear Frequency Response
The wide frequency response ensures accurate detail regardless of the source signal.
Schoeps Solid Foam Teardrop Popscreen for Schoeps Colette Series Microphones (Gray)
This gray Solid Foam Teardrop Popscreen from Schoeps is an acoustic foam close-speech popscreen intended for use with Schoeps Colette Series microphones, but compatible with other microphone capsules as well. It provides sufficient protection at normal speaking distances for cardioids and other directional capsules, especially when speech capsules are used. With omnidirectional capsules, it may even be used outdoors in light wind. This popscreen has minimal effect on sound quality.
For moderate distances from the person speaking
Can also be used as a windscreen for pressure transducers
Negligible effect on sound quality
Schoeps SG20 Microphone Stand Clamp
The Schoeps SG20 Microphone Stand Adapter is designed to stand mount microphones measuring 20mm or 21mm in diameter. The SG20 features a strong metal housing and a durable plastic clamp. Its base is threaded for 5/8 -27 stands, and a threaded adapter is included to accommodate 3/8 and 1/2 mounting. The angle is continuously variable.
Schoeps CMC6-U 12-48 Volt Phantom Power Supply and Output Stage for Colette Modular Capsules Specs
Packaging Info
Package Weight | 0.8 lb |
Box Dimensions (LxWxH) | 7.6 x 4.45 x 1.7" |
Transducer | Condenser |
Polar Pattern | Cardioid (MK4) |
Frequency Response | 40Hz to 20KHz (MK4) |
Dynamic Range (Typical) | not specified by manufacturer |
Signal-to-Noise Ratio | 79 dB-A (MK4) |
Maximum Input Sound Level | 132dB (MK4) |
Power Requirements | 12V - 48V Phantom Power (CMC6) |
Output Impedance | Minimum Load: 600 Ohms (CMC6) (If a lower load impedance is used, the main effect will be to reduce the maximum output level of the microphone.) |
Output Connectors | 3-pin XLR (CMC6) |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | 4.57 x .78" (116 x 20mm) (Length x Diameter) (with CMC6) |
Weight | 68g (with CMC6) |
Packaging Info
Package Weight | 0.12 lb |
Box Dimensions (LxWxH) | 8 x 5 x 1" |
Schoeps Solid Foam Teardrop Popscreen for Schoeps Colette Series Microphones (Gray) Specs
Maximum Noise Attenuation | 20 dBA in 11 mph / 18 km/h Wind |
Material | Foam |
Outer Diameter | 1.77" / 45 mm |
Length | 2.75" / 70 mm |
Packaging Info
Package Weight | 0.02 lb |
Box Dimensions (LxWxH) | 6.4 x 3.05 x 1.9" |
Schoeps SG20 Microphone Stand Clamp Specs
Threading | 5/8"-27 |
Construction Material | Housing: Metal Clamp: Plastic |
Packaging Info
Package Weight | 0.1 lb |
Box Dimensions (LxWxH) | 2 x 1 x 0.5" |
In the Box
- SG20 Stand Adaptor
- Polished Wood Case
- 2-Year Manufacturer Warranty
- Threaded Adapter for 3/8" and 1/2" Mounting
- 2-Year Manufacturer Warranty
- Wooden Storage Case
No posts found