Obtain the sonic characteristics of the highly regarded CMIT 5 in a compact and lightweight body with the blue Schoeps MiniCMIT short shotgun microphone, a top-tier performer for camera- or boompole-mounted use in film, TV, and location recording applications. Compliant with P12 and P48 phantom powering, the MiniCMIT can be used with professional and consumer devices.
A fixed 24 dB/octave low-cut filter at 70 Hz ensures that excessive boom noise and rumble will be kept under control. Special construction and filtering effectively inhibits interference from various sources such as radio, TV, and cellular frequencies.
The MiniCMIT s supercardioid/lobar polar pattern yields directional characteristics that smoothly increase at higher frequencies while providing low off-axis coloration for natural sound at all angles. With low self-noise, moderate sensitivity, and high SPL handling, the MiniCMIT delivers sonic performance deserving of premium mic preamps.
Professional Sound Quality
The MiniCMIT features the same frequency response curve as the CMIT 5, allowing either microphone to be used without altering the sound. Thanks to a polar pattern that stays the same in the vertical and horizontal planes, the MiniCMIT produces consistent sound quality at any point of rotation.
With directionality that increases smoothly at high frequencies and a 60 Hz to 20 kHz frequency response, the MiniCMIT is optimized for neutral, transparent capture of dialogue, foley, sound effects, and instruments. Considering its low self-noise of 14 dBA and moderate sensitivity of -35 dB, it performs best with a clean, high-gain mic preamp.
RFI Shield
The MiniCMIT utilizes special construction and filtering to provide a high standard of measurable immunity from radio-frequency interference (RFI) caused by sources such as switching power supplies, lighting controls, AM/FM radio, digital radio and TV, cellular phones, and broadband communications.
P12 or P48 Phantom Powered
The MiniCMIT features a balanced 3-pin XLR output, low current draw, and support for P12 and P48 phantom power, making it compatible with a variety of professional and consumer devices such as handheld audio recorders, portable field recorders, mixer adapters, and cinema cameras.
Ideal for Boompole or Camera Mounting
Mount the MiniCMIT directly on a stand or boompole using the supplied mic clip, affix it to a camera with an optional shoe shockmount such as the Rycote InVision Video, or place it in the separately available Rycote INV-6 InVision shockmount to prevent the transfer of vibrations to the microphone when attached to a boompole.
Windscreen Minimizes Wind Noise
The MiniCMIT includes a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in indoor or outdoor environments, consider the Rycote Cyclone Windshield Kit (Small) blimp-style windshield and suspension system (available separately).
Schoeps CCM8 LG Compact Figure-Eight Microphone
The Schoeps CCM8 LG is a miniature figure-eight microphone with a detachable cable. The figure-eight pattern design provides a bidirectional pickup that is almost completely identical at all frequencies. The figure-eight pattern is also useful in M/S stereo capturing. The K 5 LU adapter cable and an SGC miniature stand mount with swivel is also included.
Figure-Eight Polar Pattern
The capsule is a pure pressure-gradient transducer with a figure-8 pattern. The bi-directional pattern is almost completely identical at all frequencies.
Detachable K 5 LU Cable
This version of the CCM8 features a detachable 3-Pin LEMO connector allowing easier microphone interchanging and placement.
Off-Axis High Frequency Rejection
The CCM8 provides exceptional high-frequency rejection at the off-axis sections of the capsule.
Wide Linear Frequency Response
The wide frequency response ensures accurate detail regardless of the source signal.
Schoeps CCM4 LG Cardioid Compact Microphone
The Schoeps CCM4 is a miniature cardioid microphone featuring a detachable cable and designed for use on singing and speaking voices as well as a wide variety of instruments. It can be used as a spot microphone or for stereo recording with additional mics in coincident, ORTF, or M/S microphone arrangements.
The CCM 4 offers a flat frequency response, optimal rejection of rear-incident sound, and a directional pattern that remains constant throughout the audio frequency range. This mic is free of coloration whether the sound is arriving at the front, the sides, or from all around the mic at once.
Classic cardioid
Suitable for the widest range of applications, either as a spot microphone or for stereo recording with additional mics in coincident, ORTF, or M/S microphone arrangements
Consistent directionality throughout its frequency range
Preferred for singing or speaking voices and most instruments
Schoeps 16.4 XLR-7 Multicore Extension Cable
The 16.4 (5.0m) KDMS 5U XLR-7 Multicore Extension Cable from Schoeps is for three balanced signals and is used as an extension cable especially for double M/S.
Schoeps AK DMS 3U Adapter Cable
The AK DMS 3U Adapter Cable from Schoeps is used with the Schoeps Surround Sets for the Double M/S system. An XLR-7M output connector carries the signals from all three microphones (front mid, figure-8 and rear mid) the AK DMS 3U then splits the three signals out again.
Schoeps MiniCMIT Short Shotgun Microphone (Blue) Specs
Microphone
Form Factor | Stand/Boom Mount |
Sound Field | Mono |
Operating Principle | Line Gradient |
Capsule | 1 x Condenser |
Polar Pattern | Lobar, Supercardioid |
Pad | None |
Tone Adjustment | None |
Gain Adjustment | None |
Indicators | None |
On-Board Controls | None |
Windscreen | Foam (Included) |
Performance
Frequency Range | 60 Hz to 20 kHz |
Maximum SPL | 130 dB SPL (.5% THD) |
Off-Axis Rejection | 5 dB at 60° 20 dB at 120° >10 dB at 180° |
Impedance | 100 Ohms |
Load Impedance | 2 Kilohms |
Sensitivity | -35 dBV/Pa |
Output Level | 0 dBV (Max) |
Signal-to-Noise Ratio | 80 dB A-Weighted |
Equivalent Noise Level | 14 dB A-Weighted 24 dB CCIR |
CMRR | 55 dB |
Power
Operating Voltage | 12 to 48 V (Phantom Power) |
Operating Current Consumption | 2.3 mA |
Physical
Color | Blue |
Mounting | Mic Clip/Stand Adapter (Included) |
Included Case | Hard Case |
Dimensions | ¸: 0.83 x L: 5.94" / ¸: 21 x L: 151 mm |
Weight | 2.75 oz / 78 g |
Packaging Info
Package Weight | 1.2 lb |
Box Dimensions (LxWxH) | 13 x 8.8 x 2.1" |
Schoeps CCM8 LG Compact Figure-Eight Microphone Specs
Microphone
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Polar Pattern | Figure-8 |
Performance
Frequency Range | 40 Hz to 16 kHz |
Maximum SPL | 134 dB SPL Peak |
Impedance | 90 Ohms |
Sensitivity | 10 mV/Pa |
Signal-to-Noise Ratio | 76 dB A-Weighted |
Equivalent Noise Level | 18 dB A-Weighted |
Power
Operating Voltage | 12 to 48 V |
Operating Current Consumption | 4 mA |
Physical
Dimensions | ¸: 0.79 x L: 2.28" / ¸: 20 x L: 58 mm |
Weight | 1.52 oz / 43 g |
Packaging Info
Package Weight | 1.4 lb |
Box Dimensions (LxWxH) | 7.5 x 6.2 x 2.5" |
Schoeps CCM4 LG Cardioid Compact Microphone Specs
Microphone
Sound Field | Mono |
Capsule | Condenser |
Polar Pattern | Cardioid |
Performance
Frequency Range | 40 Hz to 20 kHz |
Maximum SPL | 132 dB SPL Peak |
Impedance | 90 Ohms |
Sensitivity | 13 mV/Pa |
Signal-to-Noise Ratio | 79 dB A-Weighted |
Equivalent Noise Level | 15 dB A-Weighted |
THD | 0.5% |
Connectivity
Cable Length | 16.40` / 5 m |
Power
Operating Voltage | 12 V 48 V |
Physical
Dimensions | ¸: 0.79 x L: 2.28" / ¸: 20 x L: 58 mm |
Weight | 1.52 oz / 43 g |
Packaging Info
Package Weight | 1.45 lb |
Box Dimensions (LxWxH) | 7.48 x 6.299 x 2.52" |
Schoeps 16.4` XLR-7 Multicore Extension Cable Specs
Connector | XLR-7 |
Length | 16.4` (5.0 m) |
Packaging Info
Package Weight | 0.59 lb |
Box Dimensions (LxWxH) | 6.55 x 6.25 x 1.4" |
Schoeps AK DMS 3U Adapter Cable Specs
Length | 1.6` (0.5 m) |
Input | XLR-7F 1 ground 2 front cardioid "+ phase" 3 front cardioid "- phase" 4 fig-8 "+ phase" 5 fig-8 "- phase" 6 rear cardioid "+ phase" 7 rear cardioid "- phase" |
Output | 3 XLR-3M yellow = front cardioid red = figure-eight brown = rear cardioid |
Packaging Info
Package Weight | 0.35 lb |
Box Dimensions (LxWxH) | 10 x 6 x 0.6" |
In the Box
- Schoeps W 140B Foam Windscreen for Schoeps CMIT5U and MiniCMIT Shotgun Microphones (Blue)
- Schoeps SG20 Microphone Stand Clamp
- Premium Case
- 2-Year Manufacturer Warranty
- K 5 LU Adapter Cable
- SGC Miniature Stand Mount with Swivel
- 2-Year Manufacturer Warranty
- K 5 LU Cable
- SGC Miniature Stand Mount with Swivel
- 2-Year Manufacturer Warranty
- Basket-Style Windshield Set
- Wood Box
No posts found