Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Audix TM1 Test & Measurement Microphone
EAN: 687471061299
The Audix TM1 Test & Measurement Microphone features a 6mm pre-polarized condenser element with a wide, linear and accurate frequency response for test and measurement analysis, acoustic calibration, real-time analyzers, ambient room capturing and more. The TM1 features a flat frequency response of 20Hz to 25kHz for accurate reproduction and pristine detail. Its 6mm capsule features an omnidirectional polar pattern with a linear response at the direct and off-axis sections of the microphone. The TM1 is features a 4-plate brass construction, switchcraft XLR output, nickel plate finish and shock absorbent o-rings.
6mm pre-polarized condenser capsule
Hi SPL response
Precision machined brass housings
Low noise electronics
Applications
Test and measurement
Real time analyzers
Room analysis software programs
Ambient room miking
EAN: 687471061299
The Audix TM1 Test & Measurement Microphone features a 6mm pre-polarized condenser element with a wide, linear and accurate frequency response for test and measurement analysis, acoustic calibration, real-time analyzers, ambient room capturing and more. The TM1 features a flat frequency response of 20Hz to 25kHz for accurate reproduction and pristine detail. Its 6mm capsule features an omnidirectional polar pattern with a linear response at the direct and off-axis sections of the microphone. The TM1 is features a 4-plate brass construction, switchcraft XLR output, nickel plate finish and shock absorbent o-rings.
6mm pre-polarized condenser capsule
Hi SPL response
Precision machined brass housings
Low noise electronics
Applications
Test and measurement
Real time analyzers
Room analysis software programs
Ambient room miking
Audix TM1 Specs
Microphone
| Form Factor | Handheld |
| Intended Sound Sources | Room Ambiance |
| Sound Field | Mono |
| Capsule | 1 x Electret Condenser |
| Diaphragm | 0.2" / 6 mm |
| Polar Pattern | Omnidirectional |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | Foam (Included) |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 130 dB SPL |
| Impedance | 200 Ohms |
| Sensitivity | 6 mV/Pa (1 kHz) |
| Signal-to-Noise Ratio | 66 dB |
Connectivity
| Headphone Connector | None |
Power
| Operating Voltage | 24 to 48 V |
| Operating Current Consumption | 8.9 mA |
Physical
| Color | Nickel |
| Mounting | Mic Clip/Stand Adapter, Mounting Thread (with Included Hardware) |
| Mounting Thread Size | Not Specified by Manufacturer |
| Included Case | Pouch |
| Included Filters | None |
| Construction Material | Brass |
| Dimensions | L: 5.9" / L: 150 mm |
| Weight | 4.7 oz / 132 g |
Packaging Info
| Package Weight | 0.555 lb |
| Box Dimensions (LxWxH) | 8.9 x 4.35 x 2.7" |
In the Box
- Audix TM1 Test & Measurement Microphone
- DCLIP Heavy Duty Tension Fit Mic Clip
- P1 Carrying Pouch
- 3-Year Manufacturer Warranty
No posts found
