Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
DPAMicrophones 5015ASurround Microphone Kit
The 5015ASurround Microphone Kit from DPAMicrophones includes five 4015Awide cardioid microphones matched within +/-1 dB in both frequency response and sensitivity. They can be used in orchestra and acoustic ensemble tracking where it is desirable to blend directional miking with room sound. DPAincludes mic holders, grids, and windscreens for all mics. The included Peli foam-lined case can be used for transportation and storage.
Wide pickup area and natural sound
5 carefully matched microphones
Ambience pickup with convenient directionality
Peli case for transportation and protection
The 5015ASurround Microphone Kit from DPAMicrophones includes five 4015Awide cardioid microphones matched within +/-1 dB in both frequency response and sensitivity. They can be used in orchestra and acoustic ensemble tracking where it is desirable to blend directional miking with room sound. DPAincludes mic holders, grids, and windscreens for all mics. The included Peli foam-lined case can be used for transportation and storage.
Wide pickup area and natural sound
5 carefully matched microphones
Ambience pickup with convenient directionality
Peli case for transportation and protection
DPA Microphones 5015A Specs
| Transducer | Pressure, pre-polarized condenser |
| Polar Pattern | Wide cardioid |
| Frequency Response | 20 Hz to 20 kHz Frequency range, ± 2 dB: 40 Hz to 20 kHz |
| Sensitivity | Nominal ± 2 dB at 1kHz: 10 mV/Pa; -40 dB re. 1 V/Pa |
| EIN | Equivalent Noise Level, A-Weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB) Equivalent Noise Level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting) |
| Signal-to-Noise Ratio | Typ. 76 dB(A) |
| THD | < 1 % up to 139 dB SPL peak |
| Minimum Load Impedance | 2k ohm |
| Dynamic Range | Typ. 121 dB |
| Max Input Sound Level (SPL) | 159 dB |
| Attenuation / Gain | Switchable Attenuator: 0 dB / -20 dB |
| Output Impedance | < 200 ohm |
| Cable Drive Capability | Up to 328` (100m) with DAD6001 XLR adapter |
| Output | Connector: 3-pin XLR Output Balance Principle: Impedance balancing with Active Drive |
| Common Mode Rejection | > 60 dB |
| Color | Matte Black |
| Power Supply | Power Supply: 48 V Phantom Power (+/- 4 V) Current Consumption: 2.8 mA Output Voltage: > 4 V |
| Polarity | +V at Pin 2 for positive sound pressure |
| Temperature Range | -40 ° to 113 °F (-40 ° to 45 °C) |
| Relative Humidity | Up to 90% |
| Phase | Phase Deviation for Kit: < 10° |
| Dimensions | 0.75 x 6.70" (19.00 x 170.00 mm) |
| Weight | 5.6 oz (158.0 g) |
Packaging Info
| Package Weight | 7.1 lb |
| Box Dimensions (LxWxH) | 13.8 x 12.3 x 6.2" |
In the Box
- DPA Microphones 5015A Surround Microphone Kit
- Peli Case
- 5 x Mic Holders
- 5 x Mic Grids
- 5 x Mic Windscreens
- 5-Year Manufacturer Warranty
No posts found
