RF Venue D-ARC Overview
Improve the wireless reception and reduce dropouts in your classroom, event space, or conference room with the from RF Venue. This turnkey package conveniently bundles a stylish black diversity flood antenna with a rackmount 4-channel splitter capable of splitting the RF signals from the antenna's A and B diversity connections, amplifying them, and sending them to multiple receivers. In addition to the comprehensive set of cables included with the DISTRO4, a pair of 25' coaxial BNC connecting cables are also provided.
RF Venue Diversity Architectural Antenna for UHF Wireless Microphones (Black, 470 to 616 MHz)
Get better reception from your UHF wireless microphone system with the black RF Venue Diversity Architectural Antenna. This high-performance diversity flood antenna features a slim enclosure designed to be discreetly mounted on a wall or ceiling in your classroom, meeting space, training center, or house of worship. Based on the highly acclaimed Diversity Fin Antenna, the Architectural Antenna's unique shape helps eliminate the most common signal dropouts caused by changes in the angle and orientation of the RF signal.
The back plate comes with pre-drilled holes that provide multiple mounting options you then simply attach the front plate using the included mounting screws. Rear-mounted BNC female connectors allow you to connect the antenna to your in-wall or in-ceiling cable run feeding your wireless receiver. The system uses a dual-feed antenna design with both A and B diversity connections provided, eliminating the need for two separate antennas and giving you improved wireless performance with less dropouts in a sleek, low-profile enclosure that complements any decor.
At a Glance
- Improves wireless UHF reception and reduces dropouts for clearer audio
- Wide UHF bandwidth (470 to 616 MHz)
- Two antennas in one space-saving package
- Blends into any background
- Easy, cost-effective installation
- Ceiling and wall mounting kits included
EAN: 658580646790
RF Venue DISTRO4 4-Channel UHF Antenna Distribution System (470 to 952 MHz)
The DISTRO4 4-Channel UHF Antenna Distribution System from RF Venue is an active antenna splitter designed to split the RF signal from two remotely mounted antennas and distribute it to up to 5 wireless receivers (antennas and receivers available separately). The all-metal, 1-RU rackmount splitter includes 10 BNC cables for splitting the RF signal as well as 4 DC jumpers to provide four wireless receivers with power. The unit's cascade port can be used to connect a fifth receiver (with an external power supply) or additional DISTRO4 units connected to additional receivers.
At a Glance
- Reduce IMD and crosstalk while decluttering your rack with regulated 12 VDC power to your receivers
- Routes antenna signals from a pair of diversity antennas to several receivers in a multichannel system
- Compensates for signal strength lost in the splitting process with high-quality amplifiers
- Provides DC powering for up to 4 receivers
- Internal switch applies DC power over coaxial cable to antenna connections
- Features BNC outputs for 4 receivers, plus cascade BNC for a fifth receiver (with external power supply) or additional DISTO4 units and receivers
- Wide UHF bandwidth from 470 to 952 MHz
- Works with any UHF wireless system that supports remote antenna mounting
- 1 RU full-rack width to install near receivers
- 2000mA internal power supply (no wall wart)
EAN: 718122341313
RF Venue Diversity Architectural Antenna for UHF Wireless Microphones (Black, 470 to 616 MHz) Specs
Wireless
Antenna Type | Panel |
Input/Output | 2x Coaxial BNC Female |
Compatibility | Not Specified by Manufacturer |
Operating Frequency | 470 to 698 MHz |
Gain | 3 dBi |
Number of Antennas | 2 |
Environmental
Operating Temperature | 14 to 104°F / -10 to 40°C |
Physical
Color | Black |
Dimensions | H: 2.0 x W: 11.0 x D: 11.0" / H: 50.00 x W: 280.00 x D: 280.00 mm |
Weight | 2 lb / 0.9 kg |
Packaging Info
Package Weight | 2.73 lb |
Box Dimensions (LxWxH) | 12.4 x 12 x 2.6" |
RF Venue DISTRO4 4-Channel UHF Antenna Distribution System (470 to 952 MHz) Specs
General
Compatibility | Not Specified by Manufacturer |
Power
Power Source | AC Input (Included) |
AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
Power Consumption | 60 W |
Physical
Material of Construction | Metal |
Cable Length | 14.2" / 36 cm (BNC Jumpers) 24" / 61 cm (DC Jumpers) |
Dimensions | 18.9 x 9.8 x 1.8" / 480 x 250 x 45 mm |
Weight | 4.74 lb / 2.15 kg |
Packaging Info
Package Weight | 8.6 lb |
Box Dimensions (LxWxH) | 22.1 x 12.9 x 3.6" |
In the Box
- Ceiling Hardware Mounting Kit
- Wall Hardware Mounting Kit
- 2-Year Manufacturer Warranty
- 10 x Coaxial RF Cables
- 4 x DC Power Jumpers
- AC Power Cord
- 2-Year Manufacturer Warranty
- 2 x Coaxial Cables (25')
No posts found