RF Venue OPTIX2-S3-US Overview
The OPTIX Series 3 RF-over-Fiber Antenna Distribution System from RF Venue, available here in a pack of two sets convenient for a 2-channel configuration, includes two transmitter modules and two receiver modules. The transmitter module converts RF signals arriving from an antenna source into a single-mode optical signal. It sends that signal down a length of fiber-optic cable (available separately) to the receiver module, which converts the source signal back into RF. Both modules feature three multicolor LED indicators for RF and DC status.
This system extends the range of antenna placement without any signal loss over the optical cable. It features a usable dynamic range of 60 dB, 175 to 960 MHz operating frequency, and 50-ohm impedance. User configurable controls allow you to manage signal level, apply DC power for active antennas or amplifiers, and directly monitor outputs to dial in performance. This system is compatible across VHF, UHF, and the 900 MHz band.
Fiber optic cable required
EAN: 602573615102
RF Venue OPTIX2-S3-US Specs
General
| Dynamic Range | 60 dB |
| Input Noise | -100 dBm |
| Signal | -25 dBm Max |
| Operating Frequency | 175 - 213, 470 - 698, 900 - 960 MHz |
| VSWR | < 2.5:1 |
| Impedance | 50 Ohms |
| RF Input Power Operating Range | < 0 dBm / 1 mW |
| Operating Temperature | -13 to 167°F / -25 to 75°C |
Transmitter
| Indicator | 3 x 3-Color LED, RF/DC Status |
| Connectors | 1 x 12 VDC Power Input 1 x BNC Female, RF Input / 12 VDC Output 1 x BNC Female, Monitor Loop Output 1 x ST/UPC, Optical Link Output |
| Control | 1 x DC Out (Preset: 0) 1 x Gain Adjust (Preset: 9) |
| Max Power Draw | 166 mA (Approx) at 12 VDC |
| Optical Wavelength | 1310 nm |
| Dimensions | 5.4 x 3 x 1.3" / 138 x 77 x 33 mm (Including Flange and Connectors) |
| Weight | 7.9 oz / 223 g |
Receiver
| Indicator | 3 x 3-Color LED, RF/DC Status |
| Connectors | 1 x 12 VDC Power Input 2 x BNC Female, RF Output 1 x ST/UPC, Optical Link Input |
| Controls | 1 x Gain Mode (Preset: 1) 1 x Output Level Adjust (Preset: 3) |
| Operating Voltage | 5 - 22 V |
| Power Draw | 258 mA (Approx) at 12 VDC |
| Power Supply Voltage | 12.25 VDC |
| Dimensions | 5.4 x 3 x 1.3" / 138 x 77 x 33 mm (Including Flange and Connectors) |
| Weight | 8.1 oz / 229 g |
In the Box
- RF Venue OPTIX Series 3 RF-over-Fiber Antenna Distribution System (2 Pack)
- 2 x Transmitter Modules
- 2 x Receiver Modules
- 2-Year Manufacturer Warranty
No posts found
