The Sennheiser Dual G4 EW-D ASA Active Antenna Splitter Bundle 6 Kit includes two Sennheiser EW-D ASA 4-way active antenna splitters with DC power distribution, one Sennheiser GA 3 rackmount kit for G3/G4 100, 300, and 500 series wireless system, two Sennheiser A2003UHF directional wide-band transmitting and receiving antennas, two Sennheiser NT 1-1 power supplies, sixteen BNC cables, and two 1 BNC to BNC coaxial cables. This kit can be used in live stage, theater, and rehearsal applications to receive multiple wireless frequencies through a pair of antennas, split and amplify those signals, and route them to their receiver units via coaxial cables.
Sennheiser EW-D ASA 4-Way Active Antenna Splitter with DC Distribution for EW-D Wireless Systems (470 to 694 MHz)
The rugged, all-metal Sennheiser EW-D ASA is a 4-way active antenna splitter that delivers diversity wireless signal distribution for up to four EW-D EM wireless receivers. It also provides DC power to the four receivers, for less clutter in your rack. The unit covers the Q, R, and S frequency ranges, from 470 to 694 MHz.
The EW-D ASA receives up to four wireless microphone signals through a single pair of antennas, split and amplifies these signals, and send each signal to their respective receiver via the included BNC cables.
You can either use a pair of 1/4 wave antenna (provided with one of the receivers) or upgrade to longer, 1/2-wave dipole antennas (available separately) for added range and reliability.
Adding the ADP UHF passive/directional remote antennas (available separately) to your system enables you to position the antennas closer to your transmitters and orient them for maximum coverage, achieving professional-quality RF signal reliability with virtually no dropouts.
Included is the NT 12-35 CS universal power supply with EU, UK and US adapters.
EAN: 615104343641
Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers
Robust, tour ready, and easy to install, the Sennheiser GA 3 Rackmount Kit lets you mount one or two Sennheiser Evolution Wireless (EW) G3 or G4 Series wireless receivers into 1 RU of space in any standard 19" equipment rack. It even accommodates mounting antennas on the front instead of the rear.
EAN: 615104149793
Sennheiser ADP UHF Passive Directional Antenna for EW-D Wireless Systems (470 to 1075 MHz)
The Sennheiser ADP UHF Passive Directional Antenna is an essential component for maximizing the wireless performance of your EW-D series wireless microphone system. Positioning the antenna close to your transmitters on stage and orienting it in their direction enables you to achieve maximum coverage for professional-quality RF signal reliability with low risk of interference and virtually no dropouts.
The ADP UHF is equipped with 3/8" -16 and 5/8" -27 threads for easy mounting on a mic stand. It features a 50-ohm BNC connector for connection to either an EW-D receiver, EW-D AB antenna booster, or the EW-D ASA antenna splitter via a coaxial cable (all available separately).
The unit is designed for indoor and outdoor use.
EAN: 615104343412
Sennheiser BNC to BNC Coaxial Cable (1 Foot)
BNC to BNC cable for adapting external antennas to wireless microphone receivers.
EAN: 000000000178
Sennheiser EW-D ASA 4-Way Active Antenna Splitter with DC Distribution for EW-D Wireless Systems (470 to 694 MHz) Specs
| Frequency Range | (Q-R-S): 470 to 694 MHz |
| Antenna Splitter | 2 x 1:4 or 1 x 1:8, Active |
| Amplification | In A/Out A: 0 ± 1 dB In A/Out A1, A2, A3, A4: 0 ± 1 dB In B/Out B1, B2, B3, B4: 0 ± 1 dB |
| Isolation | Output Connector: > 25 dB |
| Reflection Loss | 10 dB (All RF Ports) |
| Input Voltage | NT 12-35 CS Power Supply: 100 to 240 VAC, 50/60 Hz |
| Operating Voltage | 12 VDC |
| Current Consumption | Typical: 210 mA Total: Max 3 A (with 4 x EW-D EM and EW-D AB Connected) |
| Supplied Power | 12 VDC, 320 mA for Antenna Boosters at ANT RF In A and ANT RF In B 12 VDC, 350 mA (Max 500 mA) at A1 to A4 (Typical) |
| Relative Humidity | 5 to 95% |
| Temperature | Operating Temperature Range: 14 to 131°F / -10 to 55°C Storage Temperature Range: -4 to 158°F / -20 to 70°C |
| Dimensions | 8.3 x 6.6 x 1.7" / 212 x 168 x 43 mm |
| Weight | 38.8 oz / 1,100 g |
Packaging Info
| Package Weight | 4.89 lb |
| Box Dimensions (LxWxH) | 13.8 x 9.1 x 2.9" |
Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers Specs
| Compatibility | Sennheiser Evolution Wireless (EW) G3 and G4 Series Receivers |
| Dimensions | 19.0 x 1.7 x 8.5" / 48.3 x 4.2 x 21.7 cm (When Assembled) |
| Weight | 2.2 lb / 1 kg |
Packaging Info
| Package Weight | 2.235 lb |
| Box Dimensions (LxWxH) | 10.5 x 4.15 x 2.5" |
Sennheiser ADP UHF Passive Directional Antenna for EW-D Wireless Systems (470 to 1075 MHz) Specs
| Frequency Range | 470 to 1075 MHz |
| Apex Angle | Approx. 100° (-3 dB) |
| Front-to-Back Ratio | > 14 dB |
| Gain | 5 dBi (Typical) |
| Impedance | 50 Ohms |
| Connection | BNC Female, No DC Path |
| Threads | 3/8"-16 and and 5/8"-27 |
| Relative Humidity | 5 to 95% |
| Temperature | Operating Temperature Range: 14 to 131°F / -10 to 55°C Storage Temperature Range: -4 to 185°F / -20 to 85°C |
| Dimensions | 12.5 x 12.2" / 319 x 310 mm |
| Weight | 11.2 oz / 320 g |
Packaging Info
| Package Weight | 1.355 lb |
| Box Dimensions (LxWxH) | 14.3 x 12.9 x 1.6" |
Sennheiser BNC to BNC Coaxial Cable (1 Foot) Specs
Packaging Info
| Package Weight | 0.07 lb |
| Box Dimensions (LxWxH) | 8.25 x 6 x 0.5" |
In the Box
- 8 x BNC Interconnect Cables
- Sennheiser NT 12-35 CS Universal Power Supply for EW-D ASA Antenna Splitter
- 2-Year Manufacturer Warranty
No posts found
