The Sennheiser G4 ASA 214-UHF Active Antenna Splitter Bundle 1 Kit includes a Sennheiser EW-D ASA 4-way active antenna splitter with DC power distribution, a Sennheiser GA 3 rackmount kit for G3/G4 100, 300, and 500 series wireless systems, two BNC antenna cables for the rackmount kit, a Sennheiser NT 1-1 power supply, and eight BNC cables. This kit can be used in live stage, theater, and rehearsal applications to receive multiple wireless frequencies through a pair of antennas, split and amplify those signals, and route them to their receiver units via coaxial cables.
Sennheiser EW-D ASA 4-Way Active Antenna Splitter with DC Distribution for EW-D Wireless Systems (470 to 694 MHz)
The rugged, all-metal Sennheiser EW-D ASA is a 4-way active antenna splitter that delivers diversity wireless signal distribution for up to four EW-D EM wireless receivers. It also provides DC power to the four receivers, for less clutter in your rack. The unit covers the Q, R, and S frequency ranges, from 470 to 694 MHz.
The EW-D ASA receives up to four wireless microphone signals through a single pair of antennas, split and amplifies these signals, and send each signal to their respective receiver via the included BNC cables.
You can either use a pair of 1/4 wave antenna (provided with one of the receivers) or upgrade to longer, 1/2-wave dipole antennas (available separately) for added range and reliability.
Adding the ADP UHF passive/directional remote antennas (available separately) to your system enables you to position the antennas closer to your transmitters and orient them for maximum coverage, achieving professional-quality RF signal reliability with virtually no dropouts.
Included is the NT 12-35 CS universal power supply with EU, UK and US adapters.
EAN: 615104343641
Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers
Robust, tour ready, and easy to install, the Sennheiser GA 3 Rackmount Kit lets you mount one or two Sennheiser Evolution Wireless (EW) G3 or G4 Series wireless receivers into 1 RU of space in any standard 19" equipment rack. It even accommodates mounting antennas on the front instead of the rear.
EAN: 615104149793
Sennheiser AM 2 Antenna Front-Mount Kit for EW and EW-D Receivers
The Sennheiser AM 2 is used with the GA2 Evolution Series rackmount kit to relocate the two antennas from the back of a rackmounted receiver to the front of the rack. It is compatible with EW G2/G3/G4 and EW-D receivers as well as SR 300 IEM transmitters.
The AM 2 comes with two 50-ohm BNC cables and mounting hardware.
EAN: 615104099128
In the Box
- 8 x BNC Interconnect Cables
- Sennheiser NT 12-35 CS Universal Power Supply for EW-D ASA Antenna Splitter
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- 2 x 50-Ohm BNC Cables
- Mounting Accessories
- 2-Year Manufacturer Warranty
No posts found
