EAN: 718122341313
The DISTRO4 4-Channel UHF Antenna Distribution System from RF Venue is an active antenna splitter designed to split the RF signal from two remotely mounted antennas and distribute it to up to 5 wireless receivers (antennas and receivers available separately). The all-metal, 1-RU rackmount splitter includes 10 BNC cables for splitting the RF signal as well as 4 DC jumpers to provide four wireless receivers with power. The unit s cascade port can be used to connect a fifth receiver (with an external power supply) or additional DISTRO4 units connected to additional receivers.
At a Glance
- Reduce IMD and crosstalk while decluttering your rack with regulated 12 VDC power to your receivers
- Routes antenna signals from a pair of diversity antennas to several receivers in a multichannel system
- Compensates for signal strength lost in the splitting process with high-quality amplifiers
- Provides DC powering for up to 4 receivers
- Internal switch applies DC power over coaxial cable to antenna connections
- Features BNC outputs for 4 receivers, plus cascade BNC for a fifth receiver (with external power supply) or additional DISTO4 units and receivers
- Wide UHF bandwidth from 470 to 952 MHz
- Works with any UHF wireless system that supports remote antenna mounting
- 1 RU full-rack width to install near receivers
- 2000mAinternal power supply (no wall wart)
RF Venue Diversity Fin Antenna with Stand Mount for Wireless Microphone Systems (Black, 470 to 698 MHz)
EAN: 718122342013
The black RF Venue Diversity Fin is a multipurpose antenna that reduces dropouts using a proprietary, cross-polarized hybrid design. It is compatible with diversity wireless microphone systems of any brand. The antenna features a mounting block with 1/4 -20, 3/8 -16, and 5/8 -27 threads to secure it on the stand of your choice.
The Diversity Fin combines one LPDAand one dipole antenna in an orthogonal (right-angle) configuration. One element captures vertically polarized waves and the other horizontally polarized waves ”doing the same job as two shark-fin paddles. This design greatly improves RF and audio performance in high-profile live sound events, film and TV productions, or routine installations in schools and houses of worship.
To use, just connect both the Aand B outputs (coaxial cables available separately) to any antenna distribution system or wireless receiver, and point the antenna toward the stage.
ANylon cover protects the antenna against the elements for outdoor use.
RF Venue RG8X Low-Loss Coaxial Antenna Cable (Black, 25 )
EAN: 718122340316
This black, 25 RG8X Low-Loss Coaxial Antenna Cable from RF Venue is a 50-ohm cable that features BNC connectors and offers a cost effective, reliable interconnect. The cable is constructed with a double-shielded braid over foil to provide the right balance between loss and flexibility.
RF Venue DISTRO4 4-Channel UHF Antenna Distribution System (470 to 952 MHz) Specs
General
Compatibility | Not Specified by Manufacturer |
Power
Power Source | AC Input (Included) |
AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
Power Consumption | 60 W |
Physical
Material of Construction | Metal |
Cable Length | 14.2" / 36 cm (BNC Jumpers) 24" / 61 cm (DC Jumpers) |
Dimensions | 18.9 x 9.8 x 1.8" / 480 x 250 x 45 mm |
Weight | 4.74 lb / 2.15 kg |
Packaging Info
Package Weight | 8.95 lb |
Box Dimensions (LxWxH) | 22.1 x 12.9 x 3.6" |
RF Venue Diversity Fin Antenna with Stand Mount for Wireless Microphone Systems (Black, 470 to 698 MHz) Specs
Frequency Band | 470 to 698 MHz |
Bandwidth | 228 MHz |
Average Return Loss | -9.4 dB |
Impedance | 50 Ohms |
LPDA | Beam Width: 140° Azimuth F/B Ratio: -8 dB F/S Ratio: -5 dB Gain: 5 dBd |
Dipole | Beam Width: 100° Azimuth F/B Ratio: -5 dB F/S Ratio: -13 dB Gain: 1.8 dBd |
Connectors | 2 x BNC Female |
Mounting | 1/4"-20, 3/8"-16, 5/8"-27 Threads |
Operating Temperature | -9.4 to 129°F / -23 to 54°C |
Dimensions | 11.8 x 14.5" / 300 x 370 mm |
Weight | 16 oz / 454 g |
Packaging Info
Package Weight | 1.425 lb |
Box Dimensions (LxWxH) | 14.4 x 11.35 x 1.95" |
RF Venue RG8X Low-Loss Coaxial Antenna Cable (Black, 25`) Specs
General
Compatibility | Not Specified by Manufacturer |
Inputs / Outputs
Connector 1 | 1 x BNC Male |
Connector 2 | 1 x BNC Male |
Physical
Color | Black |
Cable Length | 25` / 7.6 m |
Packaging Info
Package Weight | 1.05 lb |
Box Dimensions (LxWxH) | 14.2 x 13 x 2.55" |
In the Box
- 10 x Coaxial RF Cables
- 4 x DC Power Jumpers
- AC Power Cord
- 2-Year Manufacturer Warranty
- Nylon Cover
- 2-Year Manufacturer Warranty
No posts found