LMC Sound Rubber Mount SL for Sanken COS-11 Lavalier Microphones (Black)

I ran a test on rustling noise between this and the Rycote undercovers and overcovers used under clothing with my countryman b6 lavalier. I also tested it against the good old moleskin. Here's what I found in order of preference: 1. The LMC mount had the least rustling noise whether I adhered to my skin or my shirt. There was still noise but quieter than the other options. I like how thin it is. 2. The moleskin was the second best since the quality of the rustling was ok and wasn't as loud as the Rycote. This is because the fibers used in moleskin was finer than the fibers in the undercover 3. The Rycote overcovers worked almost as good as the moleskin. I liked the sound of the rustling more than the undercovers, but it was puffy 4. I was surprised that the Rycote undercovers were the loudest and had more of a crisp rustle probably caused by the thicker fibers used. I tested two ways for each product. I adhered to the inside of my shirt and tested again ashes ring to my skin. One thing to be careful of is removing the delicate b6 mic in the tight rubber sleeve. I'm afraid that if I pull it out of the sleeve too hard, it will pull the wire from the mic. I also put the adhesive in the cutaway side of the rubber mount where the b6 capsule fit perfectly.