Optional XLR Adapter for Wired Applications
The DAD6001 Microdot to 3-pin XLR Adapter (available separately) allows you to power the 4060 from 12 or 48V phantom power for wired applications.
A Reliable Broadcast-Quality Lavalier
Miniature Mic with a Crisp, Clear Sound
The 4060 CORE features a 5.4mm capsule that enables the microphone to be inconspicuous and easily disguised in clothing or costumes. The vertical diaphragm design offers a clear and natural sound optimized for the human voice.
Two Boost Grids Included to Tailor High Frequencies
The pre-fitted Soft-Boost Grid gives a 3 dB soft boost at 8 to 20 kHz range. It should be used when the microphone is mounted on the performer s head as well as in most other applications where you need a natural-sounding mic. Alternatively, the High-Boost Grid introduces a 10 dB boost around 12 kHz for applications where chest placement is preferred. Both grids are made of tough and scratch-resistant anodized stainless steel, allowing them to be detached and cleaned.
Normal Headroom for Standard Speech
The 4060 CORE features a sensitive capsule designed for standard speech and vocal applications at levels up to 134 dB SPL before clipping.
Omnidirectional Polar Pattern
The forgiving omnidirectional pick-up pattern captures sound from all around the mic and provides a consistent frequency response, even for off-axis sound. This helps to supply clear, intelligible speech and vocals, even when the talent turns away from the microphone.
Tough, Moisture-Resistant Construction
Engineered with a double-vent protection system, the 4060 is certified IP58 for dust and moisture resistance. The rugged 5.9 cable is built with Kevlar strain relief to survive the constant twists, bends, and pulls that are part of everyday use in harsh environments.
Additional Options
This version of the DPA 4060 CORE does not include mounts, windscreens, or clips they are available separately.
- The SCM0032-B 2-Way Dual Clip allows you to mount two lavs for broadcasting.
- The SCM0013-B 4-Way Clip offers a variety of flexible positioning choices for up, down, left, and right mounting.
- To hide the mic, the DMM0021 Concealer attaches safely and securely to clothing and costumes and is designed to resist clothing and rustling noise.
- Foam windscreens to reduce breath and plosive noises are available in multiple color choices to match clothing.
DPA Microphones Core 4060 Specs
Microphone
| Instrument Mic Type | Acoustic Bass, Acoustic Guitar, Cello, Flute, Ukelele, Viola, Violin |
| Sound Field | Mono |
| Operating Principle | Pressure Operated |
| Capsule | Condenser |
| Diaphragm | 0.2" / 5.4 mm |
| Polar Pattern | Omnidirectional |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 129 dB SPL Peak (Plug-In Power, 1% THD) 134 dB SPL Peak (Plug-In Power, 10% THD) |
| Impedance | 40 Ohms |
| Sensitivity | 20 mV/Pa at 1 Hz |
| Dynamic Range | 106 dB A-Weighted |
| Signal-to-Noise Ratio | 71 dB A-Weighted |
| Equivalent Noise Level | 35 dB ITU-R 468 |
| THD | < 1% |
Connectivity
| Output | 1 x Microdot 1-Pin Male (Lockable) |
| Headphone Connector | None |
| Cable Length | 5.9` / 1.8 m |
Power
| Operating Voltage | 5 to 10 V |
| Operating Current Consumption | 1.5 mA |
Physical
| Color | Brown |
| Mounting | Alligator Clip, Instrument Clamp, Lapel Pin / Dracula Mount, Magnetic Mount, Rubber Body Mount (with Optional Hardware) |
| IP Rating | IP58 |
| Operating Temperature | -40 to 113°F / -40 to 45°C |
| Operating Humidity | 90% |
| Weight | 0.26 oz / 7.5 g (with Cable) |
In the Box
- DPA Microphones 4060 CORE Normal-Sensitivity Omni Lavalier Microphone (Brown)
- High-Boost Protection Grid
- Soft-Boost Protection Grid
- 2-Year Manufacturer Warranty
No posts found
