EAN: 615104134645
The Sennheiser MKE1 Miniature Lavalier Microphone is their smallest, professional lavalier microphone to date. Measuring just 3.3mm (0.12 ) in diameter, the MKE1 is well suited for placement in hair, the body, clothing, accessories, props, etc.
Audio signal is reproduced transparently, while maximum intelligibility of speech and vocals is achieved with its omnidirectional polar pattern and wide frequency response.
The Kevlar reinforced cable is rugged and minimizes surface noise. The MKE1 s moisture resistant enclosure protects against damage caused by moisture, making it well suited for actors, performers and broadcast applications.
3-pin Lemo Connector
Miniature low-profile design
Very small dimensions (3.3mm capsule diameter)
High maximum sound pressure level (142dB)
Very high speech intelligibility clear, pleasant treble
Full, natural sound with low ambient noise
Thin (1 mm diameter) and robust cable flexible with minimum handling noise
Very sweat-resistant due to protective membrane
Flexible tubes for attaching the microphone with clips or adhesive tape
Sennheiser MKE1 Specs
Transducer | Condenser |
Polar Pattern | Omnidirectional |
Frequency Response | 20Hz to 20kHz +/- 2.5dB |
Dynamic Range (Typical) | Not Specified By Manufacturer |
Signal-to-Noise Ratio | Equivalent noise level 27dB Equivalent noise level 39dB |
Maximum Input Sound Level | 142dB |
Power Requirements | 4.5 - 15V |
Output Impedance | 1k Ohm (Nominal) 4.7k Ohm (Min. Terminating) |
Output Connectors | 3-pin Lemo |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | 0.12" (3.5mm) Diameter 5.2` (2.70m) (3-pin, EW variants) 9.8ft (pigtail variants) |
Weight | 0.004 oz (0.1g) |
Packaging Info
Package Weight | 0.1 lb |
Box Dimensions (LxWxH) | 6.1 x 3.2 x 0.5" |
In the Box
- Sennheiser MKE1 - Professional Lavalier Microphone (Black)
- MKE 1 Clip-on Microphone
- MZC 1-1 Small Frequency Response Cap
- MZC 1-2 Large Frequency Response Cap
- 3 x Make-up Protection Caps
- 2-Year Manufacturer Warranty
No posts found