Shure WL183M Overview
A Discreet and Dependable Omnidirectional Lavalier
The white Shure WL183m is a discreet, low-profile omnidirectional lavalier microphone well suited to a wide variety of interview, presentation, broadcast, and film/video applications. Not only does the lav offer a profile that is 8mm shorter then previous models, the WL183m delivers better audio quality with an improved presence response, higher dynamic range, and lower self-noise for crystal-clear speech and vocals.
Optimized for a 5 VDC plug-in power source, the mic features a 4' cable, terminating in a TA4F connector for use with a compatible Shure wireless bodypack transmitter or similar device. A snap-fit windscreen and adjustable lapel clip that offers 90° rotation for optimal mic placement are included. A zippered storage pouch is also supplied.
Omnidirectional Polar Pattern
The mic's forgiving omnidirectional polar pattern picks up sound evenly in a 360° radius around the capsule, helping to supply consistent speech levels, even when the talent isn't speaking directly toward the microphone.
Headroom for Speech and Vocals
The electret condenser capsule in this TA4F version of the WL183m offers a 121 dB dynamic range and a very low self-noise of only 20 dB SPL it can also handle up to 141 dB SPL with only 1% total harmonic distortion (THD), providing headroom for broadcast-quality interviews, speech, and dialog.
Frequency Response Tailored for Speech
With a frequency range from 70 Hz to 20 kHz, the mic filters out unnecessary low frequencies and provides extended high-end range for accurate and transparent speech reproduction.
Low-Profile Appearance
Compared to the original, the durable aluminum alloy housing on the WL183m is 8mm shorter and features a smaller snap-on windscreen, providing a more discreet appearance for presenters, performers, and on-camera talent.
TA4F Connector
Compatible Wireless Transmitters
- Shure: works with Shure transmitters equipped with a TA4M connector, including the following models: AD1, ADX1, AXT100TA4F, BLX1, GLXD1, MXW1, PGXD1, QLXD1, SLX1, SLXD1, ULX1, and ULXD1
- Third-party devices: the WL183m will work with third-party wireless transmitters that are equipped to supply 5 VDC through a TA4M connector.
Shure WL183M Specs
Key Specs
| Form Factor | Lavalier |
| Compatible Transmitters | Shure: Axient AD1, Axient ADX1, Axient AXT100, BLX1, GLXD1, MXW1, PGXD1, QLXD1, SLX1, SLXD1, ULX1, ULXD1 |
| Polar Pattern | Omnidirectional |
| Frequency Range | 70 Hz to 20 kHz |
| Maximum SPL | 141 dB SPL (1% THD) |
| Output Connector | 1x TA4F/Mini-XLR 4-Pin Female |
| Power Sources | Plug-In Power |
| Color | White |
Microphone
| Form Factor | Lavalier |
| Compatible Transmitters | Shure: Axient AD1, Axient ADX1, Axient AXT100, BLX1, GLXD1, MXW1, PGXD1, QLXD1, SLX1, SLXD1, ULX1, ULXD1 |
| Intended Sound Sources | Vocals, Speech/Voice-Over |
| Sound Field | Mono |
| Element Type | 1x Electret Condenser |
| Polar Pattern | Omnidirectional |
| Included Tone Caps | No |
Performance
| Frequency Range | 70 Hz to 20 kHz |
| Maximum SPL | 141 dB SPL (1% THD) |
| Sensitivity | -44 dBV/Pa |
| Dynamic Range | 121 dB |
| Signal-to-Noise Ratio | 74.1 dB |
Connectivity
| Output Connector | 1x TA4F/Mini-XLR 4-Pin Female |
| Cable Length | 4' / 1.22 m |
Power
| Power Sources | Plug-In Power |
| Operating Voltage | 5 V (Plug-In Power) |
Physical
| Color | White |
| Construction Material | Aluminum |
| Dimensions | : 0.5 x L: 0.53" / : 12.74 x L: 13.55 mm |
| Weight | 0.7 oz / 20 g (with Cable) |
Packaging Info
| Package Weight | 0.375 lb |
| Box Dimensions (LxWxH) | 6.8 x 5.7 x 1.6" |
In the Box
- Shure WL183m Low-Profile Omnidirectional Lavalier Microphone with TA4F Connector (White)
- Snap-Fit Windscreen
- Rotatable Lapel Clip
- Zippered Carrying Pouch
- 2-Year Manufacturer Warranty
No posts found
