Shure WL184M Overview
A Discreet and Dependable Supercardioid Lavalier
The white Shure WL184m is a discreet, low-profile supercardioid lavalier microphone well suited to a wide variety of interview, presentation, broadcast, and film/video applications. Not only does the lav offer a profile that is 8mm shorter then previous models, the WL184m delivers better audio quality with an improved presence response, higher dynamic range, and lower self-noise for crystal clear speech and vocals.
Optimized for a 5 VDC plug-in power source, the mic features a 4' cable terminating in a TA4F connector for use with a compatible Shure wireless bodypack transmitter or similar device. A snap-fit windscreen and adjustable lapel clip that offers 90° rotation for optimal mic placement are included. A zippered storage pouch is also supplied.
Supercardioid Polar Pattern
The mic's supercardioid polar pattern delivers a very narrow pickup pattern focused tightly on the person talking. This helps to reduce bleed from other audio sources and is especially useful in keeping feedback under control when loudspeakers and audio monitors are used.
Headroom for Speech and Vocals
The electret condenser capsule in this TA4F version of the WL184m offers a 121 dB dynamic range and a very low self-noise of only 23 dB SPL. It can also handle up to 144 dB SPL with only 1% total harmonic distortion (THD), providing headroom for broadcast-quality interviews, speech, and dialog.
Frequency Response Tailored for Speech
With a frequency range from 70 Hz to 20 kHz, the mic filters out unnecessary low frequencies and provides extended high-end range for accurate and transparent speech reproduction.
Low-Profile Appearance
Compared to the original, the durable aluminum alloy housing on the WL184m is 8mm shorter and features a smaller snap-on windscreen, providing a more discreet appearance for presenters, performers, and on-camera talent.
TA4F Connector
Compatible Wireless Transmitters
- Shure: works with Shure transmitters equipped with a TA4M connector, including the following models: AD1, ADX1, AXT100TA4F, BLX1, GLXD1, MXW1, PGXD1, QLXD1, SLX1, SLXD1, ULX1, and ULXD1
- Third-party devices: the WL184m will work with third-party wireless transmitters that are equipped to supply 5 VDC through a TA4M connector.
Shure WL184M Specs
Key Specs
| Form Factor | Lavalier |
| Compatible Transmitters | Shure: Axient AD1, Axient ADX1, Axient AXT100, BLX1, GLXD1, MXW1, PGXD1, QLXD1, SLX1, SLXD1, ULX1, ULXD1 |
| Polar Pattern | Supercardioid |
| Frequency Range | 70 Hz to 20 kHz |
| Maximum SPL | 144 dB SPL (1% THD) |
| Output Connector | 1x TA4F/Mini-XLR 4-Pin Female |
| Power Sources | Plug-In Power |
| Color | White |
Microphone
| Form Factor | Lavalier |
| Compatible Transmitters | Shure: Axient AD1, Axient ADX1, Axient AXT100, BLX1, GLXD1, MXW1, PGXD1, QLXD1, SLX1, SLXD1, ULX1, ULXD1 |
| Intended Sound Sources | Vocals, Speech/Voice-Over |
| Sound Field | Mono |
| Element Type | 1x Electret Condenser |
| Polar Pattern | Supercardioid |
| Included Tone Caps | No |
Performance
| Frequency Range | 70 Hz to 20 kHz |
| Maximum SPL | 144 dB SPL (1% THD) |
| Sensitivity | -47 dBV/Pa |
| Dynamic Range | 121 dB |
| Signal-to-Noise Ratio | 71 dB |
Connectivity
| Output Connector | 1x TA4F/Mini-XLR 4-Pin Female |
| Cable Length | 4' / 1.22 m |
Power
| Power Sources | Plug-In Power |
| Operating Voltage | 5 V (Plug-In Power) |
Physical
| Color | White |
| Construction Material | Aluminum |
| Dimensions | : 0.5 x L: 0.53" / : 12.74 x L: 13.55 mm |
| Weight | 0.7 oz / 20 g (with Cable) |
Packaging Info
| Package Weight | 0.38 lb |
| Box Dimensions (LxWxH) | 6.3 x 6 x 1.6" |
In the Box
- Shure WL184m Low-Profile Supercardioid Lavalier Microphone with TA4F Connector (White)
- Snap-Fit Windscreen
- Rotatable Lapel Clip
- Zippered Carrying Pouch
- 2-Year Manufacturer Warranty
No posts found
