Lectrosonics DCR822 Compact Dual-Channel Digital Wireless Receiver (941: 941 to 959 MHz)

The DCR822 features Vector Diversity technology (an advanced type of True Diversity), two front ends per audio channels, a wide 18 MHz frequency band, 24-bit/48 kHz resolution, and a rugged machined aluminum housing to withstand the rigors of field production. It is ideal for mobile production sound, sports video, reality TV, and anywhere a wireless system must provide mission-critical RF reliability and audio quality, despite the challenges of shrinking spectrum and high noise floor.

A bright OLED screen and a user-friendly interface with intuitive selection buttons help make the DCR822 easy to see and operate on set. Setup is easy with the onboard RF spectrum analyzer and SmartTune functions that quickly find a clean, interference-free operation frequency. Settings are sent from the receiver to the transmitter via IR, at the press of a button. The AES 256-CTR encryption with four types of key policies ensures your transmissions are safe from prying ears.

Two TA3M audio output jacks can be independently configured as mic-/line-level analog outputs or as two-channel AES3 digital outputs. A variety of output cables are available separately, each to accommodate your mixer s type of inputs.

Providing another helpful addition, the onboard SDHC recorder is capable of recording .WAV (BWF) files while the transmitter is sending wireless signal, making it a truly useful backup option.

The DCR822 operates up to 6 hours on four AA batteries. The unit can also be powered using the DCR12/A5U universal DC power supply (available separately). Removable AMJ jointed antennas, a micro-SD card, and a zippered case are also supplied.

Vector Diversity for Mission-Critical Performance

The DCR822’s Vector Diversity subsystem smoothly and continuously combines RF signals from two receiver front ends per channel, with differing phase angles in order to obtain maximum energy. Not only does this method deliver clean, artifact-free performance in all modes, it is actually able to take two signals compromised by multipath interference and reassemble them into a usable signal.

The two RF gain stages (per audio channel) in the front end provide low-noise RF amplification, excellent sensitivity, and extremely low susceptibility to intermodulation and de-sensitization.

High IP3 Performance for Tough RF Environments

The DCR822 has one of the highest Third-Order (IP3) Performance of +15 dBm, comparing this with +5 to +8 dBm provided by typical audio RF transmitters. High IP3 performance allows the DCR822 to better eliminate the negative impact caused by third-order intermodulation artifacts, have better signal-to-noise ratio, and also perform greater reliability in today s congested RF spectrum.

SmartNR Noise Reduction

With a noise floor at -120 dBV and a frequency response up to 20 kHz, high-frequency noise in the source audio is more apparent than in conventional wireless systems. The SmartNR algorithm has three modes. When OFF, no noise reduction is performed. When NORMAL is selected, enough noise reduction is applied to remove most of the hiss from the mic preamp and some of the hiss from lavaliere microphones. When FULL is selected, enough noise reduction is applied to remove most of the hiss from nearly any signal source of reasonable quality, assuming levels are set correctly at the transmitter.

SmartTune Auto Frequency Selection

A major problem facing wireless users is finding clear operating frequencies, especially in RF saturated environments. SmartTune solves this problem by automatically scanning all the frequencies available in the unit, and tuning to the frequency with the lowest RF interference, significantly reducing setup time.

Onboard Recording via microSDHC Card

The DCR822 can record received audio on a microSD card, in the industry-standard .wav (BWF) file format, at 24-bit/48 kHz for compatibility with any audio or video editing software. Recording can be done simultaneously with audio output from the receivers. You can record up to 46 hours on a 32GB card.

Compatible Transmitters

The DCR822 offers compatibility with the D-Squared and Duet digital transmitters, including the DBu, DHu, DPr, DCHT, and M2T. There is backward compatibility with any Digital Hybrid wireless transmitters including the SM and SMWB series, WM, HM Series, MM400 Series, HHSeries, LT, LMb, UM400 Series, and SSM.

At a Glance

• Tunes across 18 MHz
• Dual Independent receiver channels
• Vector Diversity with continuous amplitude and phase matching for unparalleled RF performance
• Two RF front ends per audio channel (True Diversity)
• Fast RF scanning and setup via IR
• 24-bit/48 kHz digital audio
• High Third-Order Intercept (IP3) performance of +15 dBm (versus typical performance of +5 to +8 dBm)
• Selectable, two analog and four AES3 digital audio outputs on two TA3M connectors
• 6 hours on four AA batteries or external DC power
• Onboard recording via microSDHC card in .WAV (BWF) file format
• Built-in RF spectrum analyzer
• SmartTune for quick auto frequency selection
• SmartNR for superior noise reduction with high-noise sources
• Built-in 1kHz audio test tone
• Machined aluminum housing with hard-anodized finish
• OLED display provides visibility in all lighting conditions
• AES-256 CTR mode Encryption with 4 different key policies
• USB port for connectivity with Wireless Designer software