Lectrosonics DSQD 4-Channel Digital Wireless Receiver with Dante (470 to 608 MHz)

Audio fidelity is outstanding with a flat 20 Hz to 20 kHz frequency response, wide dynamic range, 24-bit/48 kHz digital audio encoding, digital transmission, and ultra-low latency. The DSQD tunes continuously across the extended UHF band from 470 to 608 MHz. It features tracking filters that stay centered on the selected frequency, ensuring excellent RF performance even in difficult environments. Three selectable diversity modes can be employed, depending on the needs of the application. The DSQD is optimized for the DBu bodypack and DHu handheld digital transmitters, but is also backward-compatible with any Digital Hybrid wireless transmitter. Three levels of AES 256-CTR encryption are available when using digital transmitters.

The streamlined menu structure makes the unit easy to use and quick to set up with auto-scan and two-way IR sync. A large, high-resolution backlit LCD and large membrane switches provide an intuitive interface that is highly visible in daylight or dimly lit conditions. The DSQD can be programmed and monitored over its USB or Ethernet connections using the Wireless Designer software for Mac/Windows (free download available separately). The software allows for offline full-system frequency coordination, greatly reducing setup time.

Antenna ports on the rear panel accept input from remote antennas. The antenna loop-thru cascade outputs use an internal multi-coupler, enabling you to run multiple receivers from a single pair of antennas without the need for additional components. The DSQD includes half the rack hardware needed to mount two units together, yielding 8 channels in 1RU. If you re rackmounting only a single DSQD, the RMPM2T-1 mounting kit (available separately) is required.

Backward Compatibility

The DSQD is backward compatible with any Digital Hybrid Wireless transmitters including the SM Series, LT, HM Series, SSM, HH Series, UM400, UM400a, LM Series, MM Series, and WM. It can also pick up channels from an M2T duet transmitter or a DCHT portable stereo transmitter.

System Performance

• 1.4 ms latency, transmitter input to analog output, using a digital transmitter
• <2.9 ms latency, transmitter input to analog output, using any Digital Hybrid Wireless transmitter
• THD+N of 0.05% at 1 kHz, -10 dBFS
• 108 dB of dynamic range

Ratio: Two receiver channels can be paired as one receiver. Both channels are set on the same frequency. One receiver in the pair is fixed on Antenna A, while the other receiver is fixed on Antenna B. The DSQD automatically uses whichever receivera€™s RF signal quality is better.

Frequency: Two receiver channels are paired as one receiver. Each channel is set to a different frequency. The DSQD automatically uses whichever receivera€™s RF signal quality is better.

Three Levels of Encryption

Standard: This is the highest level of security. The receiver tracks the number of keys generated and the number of times each key is transferred. Once a Standard key has been transferred 256 times, the software alerts you that a new key must be created.

Shared: There are an unlimited number of shared keys available. Once generated by the DSQD and transferred to the transmitter, the encryption key is available to be shared (synced) by the transmitter with other transmitters/receivers via the IR port.

Universal: This is the most convenient encryption option available. All encryption-capable Lectrosonics transmitters and receivers contain the Universal Key. The key does not have to be generated by the DSQD. Simply set a Lectrosonics encryption-capable transmitter and the DSQD to Universal, and the encryption is in place.

Infrared Sync

The DSQD has a bidirectional IrDA interface that allows quick syncing of settings and encryption keys to transmitters with the push of a button.

Large Color LCD Display

On the home screen, the high-resolution color display shows activity for all four channels including operating frequencies, RF levels with 10 seconds of history, audio levels, transmitters battery levels, and mute status.

Networked Audio

Dante support allows you to seamlessly send uncompressed, multichannel audio over standard IP Ethernet networks with low-latency, sample-accurate synchronization, and automatic device discovery.

Wireless Designer Software

Wireless Designer software integrates the digital and Digital Hybrid Wireless into a single control panel with site scanning and frequency coordination. The software can be used while connected to the DSQD or offline in planning a large multichannel system.

Other Features

• Digital talkback capability when used with talkback-enabled transmitters
• Stereo headphone jack with retractable headphone volume knob for audio monitoring per channel
• Antenna bias power can be engaged in the menu, and front-panel LEDs show the status
• Serial input and output ports for connecting receivers to each other for data sharing
• Adding a pair of ALP690 active antennas increases the range of your system and offers increased protection against interference