Designed for fixed installation, the Lectrosonics R400A receiver is a half-rack unit featuring Lectrosonics s digital hybrid technology. The dual antennas are an confirmation of its Smart Diversity enhanced reception circuitry. The rear panel features both XLR and 1/4" phone output connections, both with output level control adjust. A comprehensive LCD displays pilot tone, antenna phase, transmitter battery status, audio level, RF level, battery timer, frequency, and transmitter switch settings.
Digital Hybrid Technology
Digital Hybrid technology digitizes the audio signal at the transmitter end. The signal is then converted to analog at the receiver end, eliminating analog compandor circuitry. The result is accurate transmission with great range, without noise caused by analog compandors.
SmartTune Frequency Selection
SmartTune automatically scans for usable frequencies within the systems frequency block.
SmartDiversity Reception
Incoming radio frequency level and rate is carefully analyzed in order to determine the optimum timing for phase switching. The result minimizes drop-out and radio frequency interference.
Compact Profile
The R400A utilizes microprocessor components, attributing to its small size. The optional RMPR400-1 / RMPR400-2, rack-mount kits enable mounting single or dual units into a 19-inch single rack space.
Lectrosonics R400A Specs
Type of Receiver | R400 |
RF Carrier Frequency Range | Frequency Block 19 |
Approx. Working Range | Not Specified by Manufacturer |
Overall Frequency Response | 30Hz to 20kHz (+/- 1dB) |
Signal-to-Noise Ratio | @ receiver output (dB)- SmartNR Off: 103.5dB SmartNR Normal: 107dB SmartNR Full: 108.5dB |
# Of Channels | 256 User Selectable UHF Frequencies |
Type of Output(s) | Balanced: 3-pin XLR Unbalanced: 1/4" Phone |
Headphone Monitoring | No |
Power Requirements | Minimum 8 to maximum 18VDC; 1.6W, 200mA maximum |
Battery Type/Approx. Life | Not Applicable, DC Power Only |
Display | LCD Main Window: Pilot tone; antenna phase, transmitter battery status, audio level, RF level, battery timer, frequency, and Transmitter switch setting |
Mounting Options | Optional RMPR400-1 / RMPR400-2, single and dual unit rack mount kits. |
Antenna Type | Antenna Type |
Dimensions | 5.50 x 1.75 x 6.25" (14 x 4.5 x 16cm) (WxHxD) |
Weight | 12.4 oz |
Packaging Info
Package Weight | 2.3 lb |
Box Dimensions (LxWxH) | 14.1 x 10.6 x 4.2" |
In the Box
- Lectrosonics R400A UHF Diversity Receiver (Frequency Block 19)
- 2-Year Manufacturer Warranty
No posts found