Azden PRO-XD Overview
The PRO-XD from Azden is a 2.4 GHz digital wireless lavalier system that has over a 100' range with automatic frequency scan and sync capabilities. It can be used to capture audio in several environments for applications such as camcorders, DSLR, mobile devices, recorders, and more.
The PRO-XD system features a PRO-XDT bodypack transmitter, a PRO-XDR camera-mount receiver, and an EX-503XD lavalier microphone. The receiver is built with mic and headphone output jacks. The bodypack transmitter includes a line level jack and a mixed input jack to allow for several source options.
The PRO-XD's transmitter and receiver are powered by internal lithium-ion batteries, and each can operate for over 10 hours when fully charged. In addition, up to four systems can be used simultaneously with no interference.
Finally, set up is a breeze with automatic syncing between receiver and transmitter. The EX-503XD lavalier microphone features an omnidirectional polar pattern with a frequency response of 30 Hz to 20 kHz. The PRO-XD system also includes an 1/8" mini-output cable, a USB cable, a lapel clip, a shoe mount, and a battery charger.
Operates in 2.4 GHz wireless range, which is completely free of TV and radio interference
48 kHz/16-bit digital audio quality
Mobile device compatible
Rechargeable internal batteries will run for approximately 10 hours
Wide frequency response and low internal noise
Headphone monitor output
Line in aux input
EAN: 095528622520
Azden PRO-XD Specs
System
| Operating Frequency | 2.4 GHz ISM band |
| Dynamic Range | 90 dB |
| Signal to Noise | 80 dB |
| Operating Range | 115' / 35 m typical; up to 394' / 120 m in ideal conditions |
| Frequency Response | 20 Hz - 20 kHz, ± 1 dB |
| Digital Sampling | 16-bit/48 kHz |
| System Latency | 14 ms |
| Battery Life | 300 cycles |
| Battery Type | Lithium-ion |
| Power Supply | USB 5 V |
Receiver
| RF Output Power | 10 mW |
| Maximum Output Level | -14 dBV |
| Mic Output | 1/8" / 3.5 mm dual-mono/stereo |
| Headphone Output | 1/8" / 3.5 mm stereo |
| Output Impedance | Mic: 600 ohms Headphone: 16 ohms |
| Battery Life | 16 hours |
| Battery Charge Time | 3 hours |
| Dimensions | 1.9 x 3.1 x 0.6" / 48 x 79 x 14 mm |
| Weight | 2.4 oz / 68 g |
Transmitter
| RF Output Power | 10 mW |
| Mic Input | 3.5 mm mono TRRS |
| Aux Input | 1/8" / 3.5 mm stereo, line level |
| Input Impedance | Mic: 2.2 kOhms Aux: 10 kOhms |
| Maximum Input | 300 mV RMS |
| Battery Life | 11 hours |
| Dimensions | 1.9 x 3.1 x 0.6" / 48 x 79 x 14 mm |
| Weight | 2.2 oz / 62 g |
Microphone
| Microphone Element | Electret condenser |
| Polar Pattern | Omnidirectional |
| Frequency Response | 30 Hz to 20 kHz |
| Sensitivity | -46 dB at 1 kHz (0 dB=1 V/Pa) |
| Impedance | 2.2 kOhms (at 1 kHz) |
| Power Requirement | Plug-in power 1-10 VDC |
| Connector Type | 1/8" / 3.5 mm TRRS |
| Cord Length | 41" / 105 cm |
Packaging Info
| Package Weight | 0.81 lb |
| Box Dimensions (LxWxH) | 7.45 x 5.5 x 2.1" |
In the Box
- Azden PRO-XD 2.4 GHz Digital Wireless Lavalier System
- PRO-XDR Receiver
- PRO-XDT Transmitter
- EX-503XD Lavalier Microphone and Windscreen
- 1/8" Mini-Jack Stereo Output Cable
- TRRS Audio Adapter Cable for Mobile Devices
- USB Charging Unit (Cable and AC Adapter)
- Shoe Mount
- Lapel Clip
- Belt Clip
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase
