Comica Audio CVM-WM200C PRO Camera-Mount Wireless Omni Lavalier Microphone System with Backup Recording (534 to 589 MHz)

Designed for mobile journalists, videographers, and vloggers, the Comica Audio CVM-WM200C PRO one-person, camera-mount wireless lavalier microphone system is a complete solution with backup recording capabilities that allows you to record dialogue, interviews, and speech to your video rig. Record mic- or line-level sources from up to 394 away, and run audio to your camera, DSLR, or camcorder while monitoring through headphones in real time. Locking connections on the receiver and transmitter eliminate unintended cable disconnects.

The system features an omnidirectional lavalier microphone that plugs into the bodypack transmitter, which offers the ability to create backup recordings to a microSD card cards up to 128 GB are supported. Also included is a two-channel receiver, multiple cables, mounting accessories, and a carry case, the CVM-WM200C PRO has everything you need for seamless audio integration into your video production setup. Its 96 channels allow interference-free signal quality and easy setup thanks to auto-scan channel selection and automatic IR synchronization.

Dual-Channel Camera-Mount Receiver

• The CVM-WM200C PRO features a compact camera-mount receiver. Use the included shoe mount accessory to mount it on your camera, DSLR, or camcorder. A belt clip for the receiver is also supplied.
• The two-channel receiver features dual external antennas, allowing you to save space on your shooting rig by using a single receiver to simultaneously accept signals from two transmitters (second transmitter available separately).
• Both antennas on the receiver rotate 180° so you can optimize reception
• The high-resolution backlit LCD screen shows vital information such as battery status for the receiver and transmitter, audio level, and group/channel selection.
• Select mono output mode when using a single transmitter or recording signal from two transmitters to a mono camera input. When using two transmitters, switch to stereo output mode to record each transmitter to a separate audio channel (Group A to the left channel, Group B to the right channel).
• The CVM-WM200C PRO includes two audio cables one 3.5mm and one 3.5mm to XLR for connecting the receiver s volume-adjustable 3.5mm line output to the input of your camera, DSLR, or camcorder. A separate 3.5mm port is provided for real-time monitoring through headphones.

One Transmitter with Lavalier Microphone and Backup Recording

• The CVM-WM200C PRO includes a bodypack transmitter and lavalier microphone for miking one subject. The microphone s locking 3.5mm plug screws into place to prevent accidental disconnection.
• The transmitter allows you to record backup audio to a microSD card. Cards up to 128 GB are supported.
• High-speed data transfer is supported through the transmitter s USB Type-C port.
• By utilizing omnidirectional polar patterns, the lav mic offers 360° sound pickup, which is more forgiving to your subject s head movements. Fit the supplied windbuster on the lav mic to significantly reduce noise from wind and rustling of clothes.
• The transmitter s 3.5mm input can accept line-level signal, should you need to do a camera hop route the output of a mixer or field recorder into the transmitter s line input to wirelessly stream the audio mix to the receiver.

Essential Features

• Maximum operating range of approximately 394 line-of-sight
• Utilizes the UHF FM band in two groups Group A for 534.125 to 557.875 MHz and Group B for 566.125 to 589.875 MHz
• 96 channels with auto-scan selection for interference-free operation
• System can be expanded to send two transmitters to the same receiver or send one transmitter to multiple receivers
• Fast automatic sync via IR
• Transmitter and receiver powered via two AA batteries (available separately) or via their USB ports
• Selectable group (A, B, or A/B) via side-panel switch on receiver
• Switchable stereo/mono audio output on receiver (for use with two transmitters)
• 16-level volume adjustment
• Selectable mic- or line-level input on transmitter
• Transmitter low-cut filter with 80 and 160 Hz options reduces rumble and low-frequency buildup
• Selectable high/low transmitting power use low-power mode to reduce power consumption when working at close range, or switch to high-power mode to improve signal quality when working at greater distances
• Transmitter power button doubles as mute switch (long press for power, short press for mute)
• Metal body construction provides efficient shielding against EMI (electromagnetic interference)
• Includes carrying case for simplified transport