Lectrosonics 2-Person SRc Wireless Omni Lavalier Microphone System Kit for Standalone Use (A1: 470 to 537 MHz)

A Clear and Reliable Omnidirectional Lav Mic

Wide Frequency Response with Presence Boost

A wide 20 Hz to 20 kHz frequency range with a light low-end roll-off filter below 50 Hz along with a 2 to 3 dB presence boost in the 10 to 12 kHz range allows the M152 to provide crisp and accurate reproduction of speech and vocals.

Omnidirectional Polar Pattern

The forgiving omnidirectional polar pattern picks up sound from all around the mic and provides a consistent frequency response, even for off-axis sound. This helps to supply clear, intelligible speech, even when the talent isn t speaking directly toward the microphone.

Headroom for Standard Speech Applications

The mic is designed to handle speech at levels up to 114 dB without distortion, enough headroom for most broadcast and presentation applications.

Tough-Build Quality

The M152 has been designed to minimize mechanical noise and survive the rigors of on-set wear and tear to deliver clear, dependable audio.

Lectrosonics SRc Dual-Channel Slot-Mount ENG Receiver (A1: 470.100 to 537.575 MHz)

The SRc Dual-Channel Slot-Mount ENG Receiver from Lectrosonics consist of two separate receivers built into a single, ultra-compact housing with adapters for video-camera-receiver slots and for stand-alone use. They can be used when paired with a transmitter & microphone (sold separately) in various environments for ENG (Electronic News Gathering), EFP (Electronic Field Productions) and other audio applications.

Each receiver features Digital Hybrid Wireless technology that provides compandor-free audio quality and compatibility with other wireless systems. The RF performance is stable over a wide temperature range, making the receiver perfectly suited in rough environmental conditions.

The front panel has a menu-driven LCD interface and four membrane switches which are used to view and alter settings. In addition, the LCD window displays the pilot-tone indicator, diversity activity, RF level, audio level, and transmitter battery status for both receivers.

Furthermore, a built-in spectrum analyzer scans across the tuning range of the receiver and displays a histogram of RF activity across the band. Areas of RF activity are easily recognizable. The two internal receivers can be operated separately and both have switching, antenna-combining diversity, or in tandem with ratio-diversity reception.

Finally, a variety of output adapters and mounting options are available for camera-slot operation. The receivers are powered from an external 7 to 18 VDC source.

Fits camera " slots," Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters

Dual-receiver design for two channels with phase switched diversity or single channel with ratio diversity operation

Digital Hybrid Wireless with compatibility modes for use with other transmitters

Tracking front-end filters for high performance in tough RF environments

LCD with RF spectrum scanning

SmartSquelch DSP-controlled, noise-based filtering and squelch

DSP-based pilot tone for squelch control

IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)

SmartTune operation for quick and confident frequency selection

Lectrosonics SREXT SR Receiver Mounting Kit for Stand Alone Operation

The Lectrosonics SREXT is a connector panel adapter kit for the Lectrosonics SR Dual Slot-In Receiver. The kit is intended to provide the freedom of using the SR Receiver on standard, non slot-in mount scenarios. On the included connector panel are two TA3-male jacks for balanced output and a power jack with a locking connector. An unterminated power cable may trimmed to a desired length.