Line 6 Relay G10II Digital Wireless Guitar System
EAN: 614252325851
The Relay G10II Digital Wireless Guitar System from Line 6 lets you cut the cord between your instrument and your amp by combining uncompressed digital transmission, plug-and-play simplicity, and protection from interference in a simple and intuitive package. It is ideal for electric and acoustic guitar, bass, and any other instrument with a high-impedance output.
G10TII Transmitter Is Compatible with
EAN: 614252325851
The Relay G10II Digital Wireless Guitar System from Line 6 lets you cut the cord between your instrument and your amp by combining uncompressed digital transmission, plug-and-play simplicity, and protection from interference in a simple and intuitive package. It is ideal for electric and acoustic guitar, bass, and any other instrument with a high-impedance output.
The system comes with a 1/4 transmitter that plugs directly into your guitar, and a receiver that sits on top of your amplifier. The transmitter eliminates the need for a bodypack and its associated cable. The system will automatically find the cleanest frequency and sync the components, no elaborate set up or scrolling through complicated menus is required. The G10 offers 24-bit uncompresed signal over the 2.4 GHz spectrum for minimal interference with a line-of-sight range of up to 50 . The transmitter has a built-in rechargeable battery that will power the unit for up to 7 hours. The system is FCC compliant and requires no license to operate.
Features at a Glance
- G10TII transmitter plugs into your guitar, bass, or other instrument and automatically synchronizes with the receiver via the optimal wireless channel
- Transmitter runs for 7 hours on built-in rechargeable battery
- 50 Line-of-sight operating range
- Unbalanced 1/4 and balanced XLR outputs on the receiver can be used at the same time
- Preset cable tone on receiver s 1/4 output emulates 10 cable, XLR output is full range
- 110 dB dynamic range
G10TII Transmitter Is Compatible with
- Relay G10 and Relay G10S instrument wireless systems
- POD Go Wireless amp and effects processor
- Spider V 60, 120, 240, and 240HC amplifiers (both the original and MkII versions)
- Yamaha THR-II wireless amplifiers
Line 6 G10II Specs
System
| Wireless Technology | Digital 2.4 GHz |
| Included Transmitters | 1 x Plug-On |
| RF Channel Scanning | Auto-Scan |
| Max Operating Range | 50` / 15.2 m |
| Max Transmitters per Band | 1 |
| Bluetooth | Not Specified by Manufacturer |
| Latency | 2.8 ms |
| Dynamic Range | 110 dBA |
Receiver
| Receiver Type | Tabletop |
| Number of Audio Channels | 1 |
| Audio I/O | 1 x 1/4" TS Female Unbalanced Output 1 x XLR 3-Pin Male Balanced Output |
| Audio Output Level | 9.5 dBu |
| Frequency Response | 10 Hz to 20 kHz |
| USB/Lightning Connectivity | 1 x Micro-USB Female (Bus Power) |
| Power Requirements | AC/DC Power Adapter |
| AC/DC Power Adapter | 5 VDC at 1 A (Included) |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Dimensions | 4 x 3.5 x 4" / 101.6 x 88.9 x 101.6 mm |
Transmitter
| Transmitter Type | Plug-On |
| RF Output Power | Not Specified by Manufacturer |
| Audio I/O | 1 x 1/4" TS Male Balanced Input |
| Included Cable Connector | None |
| Pad | None |
| Muting | None |
| Audio Input Level | 6.5 V p-p |
| Signal Processing | None |
| Frequency Response | 10 Hz to 20 kHz |
| Sync Method | Proprietary |
| Antenna | 1 x Internal |
| Power Requirements | Battery |
| Battery Type | 1 x Built-In Rechargeable (Included) |
| Battery Charging Time | 3 Hours |
| Approx. Battery Life | 7 Hours |
| Battery Cycle Count | Up to 300 Cycles |
| Display & Indicators | 1 x LED (Battery Status) |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
Packaging Info
| Package Weight | 2.265 lb |
| Box Dimensions (LxWxH) | 14.2 x 9.8 x 3.4" |
In the Box
- Line 6 Relay G10II Digital Wireless Guitar System
- G10 Receiver
- USB Type-A to Micro-USB Cable
- Power Supply
- 2-Year Manufacturer Warranty
No posts found
