The Synco WMic-T3 is a camera-mount wireless lavalier microphone system offering a flexible and complete solution for videographers, vloggers, and mobile journalists who need to record two subjects to cameras, camcorders, or mobile devices such as smartphones and tablets, even at great distances.
The WMic-T3 includes two omnidirectional lavalier microphones for convenient voice capture in video shoots, interviews, and more. The transmitters can accommodate mic sources or line-level signals from devices such as field mixers, and their switchable RF output power settings enable optimization of power consumption and recording quality.
The dual-channel receiver can be hooked on your belt, attached to a camera shoe, or mounted on a tripod. Connect its main 3.5mm output to the mic input of your camera with the supplied TRS cable, to the input of your mobile device with the included TRRS cable, or to a professional camcorder using the provided 3.5mm to XLR cable. A separate 3.5mm headphone output lets you monitor your signal in real time to ensure it is free of distortion.
The receiver and transmitters feature 100 switchable channels and easy auto-scan setup to help you avoid interference without complicated configuration. Use the adjustable volume to manage audio levels and employ the 75/150 Hz low-cut filter to reduce rumble. The receiver and transmitters are each powered by an internal lithium battery, which offers up to 10 hours of run time and recharges via USB in approximately 3.5 hours.
Complete 2-Person Wireless Solution
- Compact dual-channel receiver with 1/4" mounting hole, belt clip, and shoe mount
- Two bodypack transmitters with 1/4" mounting holes and belt clip
- Two omnidirectional lavalier microphones with 3.5mm TRS mini plugs
- 3.5mm TRS, 3.5mm TRRS, and XLR connection cables for hookup to cameras, mobile devices, and professional camcorders
- USB charging cable
- Carry bag
System Features
- Utilizes the UHF frequency band from 512 to 537 MHz (Group A) and 564 to 589 MHz (Group B) to avoid interference from VHF and 2.4 GHz microphone systems, Bluetooth, and Wi-Fi
- Internal USB-rechargeable lithium batteries provide up to 10 hours of run time and support charging while recording
- Aluminum alloy construction for durability and resistance to interference
- Built-in audio signal processing chip, which filters undesirable noises and radio-frequency interference, and delivers clear audio quality
- Automatic channel scanning and IR sync for easy setup
- 100 switchable channels in two groups for recording without environmental interference
- Adjustable RF signal strength helps to balance power consumption and audio recording quality in different conditions
- Selectable 75/150 Hz low-cut filtering
- Selectable mono/stereo output mode
- LCD screens show channel, signal strength, battery life, volume, and more
- Menu-accessible mute function avoids accidentally muting the microphone
- Up to 590 line-of-sight operating range or up to 328 with an obstruction
- Reset key to shut down and initialize settings
- Expandable to support up to 10 WMic-T3 systems (20 microphones) at the same time
Easy Connectivity
- 3.5mm mic/line input on transmitter
- 3.5mm main output on receiver
- 3.5mm headphone output on receiver for real-time monitoring
- Includes 3.5mm TRS output cable for use with cameras and portable audio recorders
- Includes 3.5mm TRS to TRRS output cable for use with mobile devices such as smartphones and tablets
- Includes 3.5mm to XLR output cable for connection to professional camcorders
EAN: 619660478823
Synco WMIC-T3 Specs
System
| Wireless Technology | Analog UHF |
| Number of RF Channel Frequencies | 100 |
| Included Transmitters | 2 x Bodypack with Microphone |
| Diversity | Non-Diversity |
| RF Frequency Band | A: 512 to 537 MHz B: 564 to 589 MHz |
| RF Bandwidth | 25 MHz |
| RF Channel Scanning | Auto-Scan |
| Max Operating Range | 590.6` / 180 m (Line of Sight) 328.1` / 100 m (with Obstruction) |
| Max Transmitters per Band | 10 |
| Latency | < 40 ms |
| Encryption | None |
Receiver
| Receiver Type | Camera-Mount |
| Mounting Options | Belt Clip, Shoe-Mount (with Included Hardware) |
| Antenna | 1 x 1/4 Wave Wire, Fixed (Top-Mount) |
| Number of Audio Channels | 2 |
| Audio I/O | 1 x 1/8" / 3.5 mm TRS Female Unbalanced Mic Output 1 x 1/8" / 3.5 mm TRS Female Unbalanced Headphone Output |
| Signal Processing | High-Pass Filter: 75 Hz High-Pass Filter: 150 Hz |
| Network I/O | None |
| Word Clock I/O | None |
| USB/Lightning Connectivity | 1 x USB-C (Bus Power, Charging) |
| RF Principle | Double Superheterodyne |
| Spurious | Emission: <-60 dBc |
| Power Requirements | Battery |
| Battery Type | 1 x Built-In Rechargeable (Included) |
| Internal Battery Capacity | 1800 mAh |
| Battery Charging Time | 3.5 Hours |
| Approx. Battery Life | 10 Hours |
| AC/DC Power Adapter | 5 VDC at 1 A (Included) |
| Display & Indicators | 1 x LCD (AF Level, Battery Status, Channel, Data Transmission, Group, RF Level) 2 x LED (Battery Status, Group, Sync) |
| Housing | Aluminum |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Storage Temperature | -4 to 140°F / -20 to 60°C |
| Dimensions | 2.3 x 3.7 x 0.8" / 58 x 94 x 20.3 mm |
Transmitter
| Transmitter Type | Bodypack |
| RF Output Power | Up to 1000 mW (Switchable) |
| Audio I/O | 1 x 1/8" / 3.5 mm TRS Female Unbalanced Input |
| Included Cable Connector | 1/8" / 3.5 mm TRS |
| Pad | None |
| Muting | Mute Switch |
| Auto-Level Control | No |
| Signal Processing | High-Pass Filter: 75 Hz High-Pass Filter: 150 Hz |
| Sync Method | IR |
| Antenna | 1 x 1/4 Wave Wire, Fixed |
| Approximate RF Sensitivity | -95 dBm |
| Power Requirements | Battery |
| Battery Type | 1 x Built-In Rechargeable (Included) |
| Internal Battery Capacity | 1800 mAh |
| Battery Charging Time | 3.5 Hours |
| Approx. Battery Life | 10 Hours |
| USB/Lightning I/O | 1 x USB-C (Bus Power, Charging) |
| Display & Indicators | 1 x LCD (Audio Level, Channel, Group, Mute, Power, Signal Strength) 1 x LED (Battery Status, Mute, Sync) 1 x LED (Sync) |
| Housing | Aluminum |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Storage Temperature | -4 to 140°F / -20 to 60°C |
| Dimensions | 2.3 x 3.7 x 0.8" / 58 x 94 x 20.3 mm |
Microphone
| Microphone Type | Lavalier |
| Color | Black |
| Sound Field | Mono |
| Operating Principle | Pressure Operated |
| Capsule | Electret Condenser |
| Polar Pattern | Omnidirectional |
| Output | 1 x 1/8" / 3.5 mm TRS Male Unbalanced |
Packaging Info
| Package Weight | 2.445 lb |
| Box Dimensions (LxWxH) | 10.4 x 6.3 x 3.6" |
In the Box
- Synco WMic-T3 2-Person Camera-Mount Wireless Lavalier Microphone System (UHF: 512 to 589 MHz)
- Camera-Mount Receiver
- 2 x Bodypack Transmitters
- 2 x Omnidirectional Lavalier Microphones
- 3.5mm TRS Output Cable
- 3.5mm TRS to TRRS Output Cable
- 3.5mm TRS to XLR 3-Pin Male Output Cable
- USB Type-C to USB Type-A Charging Cable
- 3.5mm to 1/4" Adapter
- Cold Shoe Adapter
- 3 x Belt Clips
- Carry Bag
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase
