Use a pair dynamic microphones at the same time or send audio to active speakers with the Xvive U3D digital wireless audio system. Operating in the 2.4 GHz wireless band, with a 20 Hz to 20 kHz frequency response and less than 5 ms latency, the U3D can be used by presenters, performers, and DJs for a wide variety of applications.
The system offers a 90 range, and includes four rechargeable batteries with a five-hour life for both the two receiver and two transmitter units. For presentations and performances, plug your favorite dynamic XLR mics into the transmitters and send the mic signals to a mixer, PA, or recording device. Alternatively, plug the transmitters in the XLR outputs of a mixer or recording device and send your mix wireless to the receivers plugged into powered monitor speakers or a portable PA system. The U3D can operate with six systems simultaneously, and is suitable for live vocals, presentations, DJ gigs, video productions, and houses of worship.
The System
The system is comprised of a transmitter unit, which connects to your microphone and a receiver, which connects to a mixer, sound interface, preamp, XLR cable, or snake.
Your True Voice
The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone.
Hold On to Power
The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger, and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.
Free Your Voice
The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians, and anyone who wants to move freely while speaking or performing to an audience.
Bypass the Mixer
If you need to address a crowd through powered speaker cabinets, not only you do not need a cable, you don t need a mixer. Just connect your U3 receiver directly to the XLR input of the cabinet.
Control Your Range
The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter s signal doesn t have to reach all the way to the soundboard or monitor desk it can broadcast to the front of the stage, or any central and convenient location.
Get Amped
Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.
PA Friend
Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue. You can also run wirelessly between powered mains or between powered monitors.
Xvive Audio U3D Specs
System
| Wireless Technology | Digital 2.4 GHz |
| Number of RF Channel Frequencies | 6 |
| Included Transmitters | 2 x Plug-On |
| Diversity | Non-Diversity |
| RF Frequency Band | 2400 to 2483.5 MHz |
| Max Operating Range | 90` / 27.4 m (Line of Sight) |
| Max Transmitters per Band | 6 |
| Built-In Recorder | No |
| Timecode Support | No |
| Mobile App Compatible | *As of January, 2023: Check with manufacturer for the most up-to-date compatibility |
| Latency | 5 ms |
| Dynamic Range | 110 dB |
| Encryption | None |
Receiver
| Receiver Type | Plug-In |
| Mounting Options | Plug-In (with Included Hardware) |
| Antenna | 2 x 1/4 Wave Sleeve Dipole, Fixed |
| Number of Audio Channels | 1 |
| Audio I/O | 1 x XLR 3-Pin Male Balanced Mic/Line Output |
| Audio Output Level | 2.8 V p-p |
| Phantom Power Protection | None |
| Frequency Response | 20 Hz to 20 kHz -3 dB |
| Network I/O | None |
| Network Protocols | None |
| Word Clock I/O | None |
| USB/Lightning Connectivity | 1 x Micro-USB Female (Charging) |
| Standalone Audio Interface Capable | No |
| Impedance | XLR Output: 470 Ohms (Balanced) Antenna: 50 Ohms |
| Approximate RF Sensitivity | -88 dBm |
| Power Requirements | Battery |
| Battery Type | 1 x Built-In Rechargeable |
| Internal Battery Capacity | 860 mAh |
| Battery Charging Time | 2.5 Hour |
| Approx. Battery Life | 5 Hour |
| Display & Indicators | 3 x LED (Battery Status, Channel, Power, Sync) |
| Housing | Metal, Plastic |
| Dimensions | 1.2 x 1.1 x 3.9" / 31 x 29 x 98 mm |
| Weight | 0.2 lb / 92 g |
Transmitter
| Transmitter Type | Plug-On |
| RF Output Power | 10 mW (EIRP) |
| Audio I/O | 1 x XLR TRS Female Balanced Input (Lockable) |
| Included Cable Connector | None |
| Pad | None |
| Muting | None |
| Audio Input Level | 2.8 V p-p (Mic Level) 7 V p-p (Line Level) |
| Auto-Level Control | No |
| Gain Range | 0 / -10 dB |
| Signal Processing | None |
| Frequency Response | 20 Hz to 20 kHz -3 dB |
| Sync Method | Manual |
| Antenna | 1 x 1/4 Wave Sleeve Dipole, Fixed |
| Approximate RF Sensitivity | -88 dBm |
| Power Requirements | Battery |
| Battery Type | 1 x Built-In Rechargeable |
| Internal Battery Capacity | 860 mAh |
| Battery Charging Time | 2.5 Hours |
| Approx. Battery Life | 5 Hours |
| USB/Lightning I/O | 1 x Micro-USB (Charging) |
| Display & Indicators | 3 x LED (Battery Status, Channel, Power, Sync) |
| Housing | Metal, Plastic |
| Dimensions | 1.2 x 1.1 x 3.9" / 31 x 29 x 98 mm |
| Weight | 3.3 oz / 93 g |
Packaging Info
| Package Weight | 1.415 lb |
| Box Dimensions (LxWxH) | 8.7 x 5.7 x 2.5" |
In the Box
- Xvive Audio U3D Dual Plug-On Wireless Audio System for Dynamic Microphones & Active Monitors (2.4 GHz)
- USB Cable
- Bag
- 2-Year Manufacturer Warranty
No posts found
