The Shure SLXD3 is a reliable digital wireless plug-on XLR transmitter compatible with the SLXD4, SLXD4D, and SLXD5 receivers. Compact and lightweight, with a robust, all-metal construction and available phantom power, the unit is well suited for tough on-set operating conditions. Attach the handheld dynamic or condenser microphone of your choice for man-on-the-street interviews or connect your favorite shotgun mic for wireless booming (both types of mics are available separately).
Plug-On Transmitter Features
- The SLDX3 features a secure, twist-locking XLR connector ready to accommodate a huge variety of microphone options, including handhelds like Shure's VP64 and SM63 models as well as shotguns like the VP82 and VP89 (mics available separately).
- The transmitter offers 12 and 48V phantom power options for condenser microphones.
- Engage the -12 dB pad for use on loud sources or use the +12 dB boost option on low-level sources.
- Use the mic offset gain function to fine-tune the gain and ensure multiple mics are at similar volume levels.
- Engage the 150 Hz high-pass filter to reduce distracting, unwanted low-end for clearer speech.
- The rugged, all-metal transmitter includes a leather case with a belt clip and an OLED screen that shows essential information.
- A selectable 1/10/30mW RF output allows you to increase the transmission power for long distances or to overcome interference, if necessary the system provides a maximum transmission range up to 330'.
- Two AA batteries (included) or an SB903 rechargeable battery (available separately) will power the unit for up to 8 hours.
Transparent Digital Sound, Dependable Performance, and Multi-Mic Mode
- The SLX-D system delivers 24-bit digital audio with a fast transient response, a 20 Hz to 20 kHz frequency response, and a 118 dB dynamic range, resulting in clear, accurate sound.
- Operating far away from potential Wi-Fi interference in the 2.4 GHz band, this version of the SLXD3 transmits in the H55: 514 to 558 MHz UHF band, with a 44 MHz tuning range and 1760 frequencies available to ensure a clean wireless signal.
- The separately available receivers all feature Digital Predictive Switching Diversity, which uses a microprocessor to switch between the two antennas before dropouts occur.
- A low latency of 3.2 ms helps ensure your sound and picture are easy to properly sync.
- The SLX-D's spectrum-efficient digital transmission technology allows you to expand the system and use up to 32 mics at the same time.
- Great for shoots with several cameras and microphones, the receiver's Multi-Mic Mode lets you scan and create a list of clean frequencies, which you can send to multiple receivers via IR.
- Each receiver will sync to the appropriate transmitter at the touch of a button settings on the transmitters, including the input gain and high-pass filter are also recalled.
- Multi-Mic Mode makes channel allocation easier and more efficient since the receivers aren't all auto-scanning and competing for open frequencies.
Optional Rechargeable Battery Management
- Adding the SB903 lithium-ion rechargeable battery, along with an SBC10-903 single charger, SBC203 dual-docking charger, or SBC80-903 8-bay charger offers a cost-effective and environmentally friendly alternative to throwing away AA batteries (batteries and chargers available separately).
- Using the SB903 battery and SBC203 charger simplifies the task of keeping multiple transmitters charged and ready you can even recharge the battery while still in the transmitter or receiver.
- When powered by an SB903, the components display the remaining battery life in hours and minutes.
- The USB-C port on the transmitter allows for battery recharging and direct powering.
Shure SLXD3 Specs
Key Specs
Wireless Technology | Digital UHF |
Max Operating Range | 328' / 100 m |
Transmitter Type | Plug-On |
Audio I/O | 1x XLR 3-Pin Male Balanced Input (Locking) |
RF Frequency Band | H55: 514 to 558 MHz |
RF Bandwidth | 44 MHz |
Frequency Step Size | 25 kHz |
RF Channel Scanning | Auto-Scan |
Max Operating Range | 328' / 100 m |
Built-In Recorder | No |
Timecode Support | Yes |
Mobile App Compatible | No |
Sample Rate/Resolution | 24-Bit |
Latency | 3.2 ms |
Encryption | No |
THD | <0.02 % |
Transmitter
Transmitter Type | Plug-On |
RF Output Power | 1 / 10 / 30 mW |
Audio I/O | 1x XLR 3-Pin Male Balanced Input (Locking) |
Included Cable Connector | No |
Phantom Power | +12 V +48 V |
Pad | 12 dB |
Muting | Off/On Switch |
Audio Input Level | +20.5 to -3.5 dBV |
Auto-Level Control | No |
Gain Range | 0 +21 dB |
Signal Processing | No |
Frequency Response | 20 Hz to 20 kHz (Dependent on Mic) |
Sync Method | IR |
Antenna | Internal |
Power Requirements | Battery |
Battery Type | 2x AA (Included) 1x Shure SB903 (Not Included) |
Battery Charging Time | 1.25 to 5.5 Hours |
Approx. Battery Life | 8 Hours (Lithium Shure SB903) |
USB/Lightning I/O | No |
Display & Indicators | OLED (Battery Status, Channel, Group) |
Housing | Metal |
Operating Temperature | 0 to 122°F / -17 to 50°C |
Storage Temperature | -20 to 165°F / -28 to 73°C |
Dimensions | 1.6 x 5 x 1.6" / 41 x 126 x 41 mm |
Weight | 7.1 oz / 200 g |
Packaging Info
Package Weight | 1.215 lb |
Box Dimensions (LxWxH) | 11.1 x 5.8 x 3.3" |
In the Box
- Shure SLXD3 Digital Plug-On XLR Transmitter (H55: 514 to 558 MHz)
- Leather Holder with Belt Clip
- 2 x AA Battery
- 2-Year Manufacturer Warranty
No posts found