Precise Cardioid Pattern
Swapping out the multipattern design of the sE4400 for the cardioid capture of the sE4100 offers improved off-axis rejection and a more affordable mic without sacrificing sound quality.
- Minimizes signal bleed from unwanted sources, especially helpful in untreated spaces
- Ensures high gain before feedback across the whole frequency range
- Enhances directivity from the source by preventing coloration from indirect reflections and reverb
Switchable Attenuation Pad
The sE4100 sports the same pad with metal switches found on the sE4400, providing:
- An extended dynamic range, up to 148 dB
- Greater range of applications due to wider SPL resistance
- Support for close miking of loud sources such as electric guitars, brass instruments, and kick drums
Switchable Low-Cut Filter
The improved high-pass filter on the sE4100 changes values to 80 and 160 Hz for improved versatility. With the high-pass filter, you can eliminate low-frequency rumble or footfall noise. It also helps compensate for excessive bass when using close-miking techniques.
Handmade Metal Housing with Premium Finish
- Road worthy die-cast housing and solid spring-steel grille for a robust build
- Efficient rejection of electromagnetic interference and noise
- Premium finish ensures an eye-catching look for many years of regular use
- Handmade by sE Electronics engineers
- Rigorously tested and tuned in house for excellent quality control
EAN: 819032012079
sE Electronics sE4100 Specs
Key Specs
| Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
| Element Type | 1x Condenser |
| Polar Pattern | Cardioid |
| On-Board Controls | High-Pass Filter, Pad |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 137 dB SPL (Phantom Power, .5% THD) 157 dB SPL (Phantom Power, .5% THD, with Pad) |
| Analog Output | 1x XLR 3-Pin Male (Locking, on Mic) |
| Power Sources | Phantom Power |
Microphone
| Primary Applications | Studio Recording |
| Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
| Intended Sound Sources | Vocals, Speech/Voice-Over, Acoustic Guitar, Electric Guitar, Electric Bass, Piano, Drums, Percussion, Cymbals, Overhead, Instruments, Strings, Double Bass, Choir, Orchestra |
| Sound Field | Mono |
| Element Type | 1x Condenser |
| Diaphragm | 1" / 25.4 mm |
| Polar Pattern | Cardioid |
| Orientation | Side Address |
| Circuitry | Solid-State |
| Pad | -10 / -20 dB |
| High-Pass Filter | 80 Hz, 6 dB/Octave 160 Hz, 6 dB/Octave |
| Tone Adjustment | No |
| Gain Adjustment | No |
| On-Board Controls | High-Pass Filter, Pad |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 137 dB SPL (Phantom Power, .5% THD) 157 dB SPL (Phantom Power, .5% THD, with Pad) |
| Impedance | 125 Ohms (Phantom Power) |
| Load Impedance | 1 Kilohms (Recommended) |
| Sensitivity | 25 mV/Pa |
| Dynamic Range | 128 dB (Phantom Power, without Pad) 148 dB (Phantom Power, with Pad) |
| Signal-to-Noise Ratio | 85 dB |
| Equivalent Noise Level | 9 dB A-Weighted (Phantom Power) |
Connectivity
| Analog Output | 1x XLR 3-Pin Male (Locking, on Mic) |
| Number of Conductors | 3 |
Power
| Power Sources | Phantom Power |
| Operating Voltage | 48 V (Phantom Power) |
Physical
| Color | Black |
| Mounting Thread Size | 5/8"-27 Female (3/8"-16 Female with Included Adapter) |
| Construction Material | Metal |
| Environmental Protection | No |
| Dimensions | ø: 1.1 x W: 2.32 x L: 5.75" / ø: 2.8 x W: 5.89 x L: 14.61 cm |
| Weight | 9.9 oz / 280 g |
Packaging Info
| Package Weight | 7.675 lb |
| Box Dimensions (LxWxH) | 13.9 x 11.3 x 5.7" |
In the Box
- sE Electronics sE4100 Large-Diaphragm Condenser Microphone (Matched Pair)
- 2 x Shockmount
- 2 x Thread Adapter
- Stereo Mounting Bar
- Metal Case
- 2-Year Manufacturer Warranty
Registration Extension: 2-Year
No posts found
