Yamaha TF1 Digital Mixing Console Kit with Stage Box and Dante Card

TF1 Digital Mixing Console Kit with Stage Box and Dante Card Overview

Mix and record with this Kit which combines the Yamaha TF1 Digital Mixing Console with the Tio 1608-D2 Dante-equipped I/O rack and the NY64-D Dante I/O expansion card to create a turnkey digital mixing package well suited for a multitude of live sound reinforcement scenarios and studio applications.

Yamaha TF1 Digital Mixing Console

The Yamaha TF1 is a rack-mountable digital audio mixing console that features a touchscreen display, 17 motorized faders, and is expandable up to 40 input channels by adding the optional Tio1608-D I/O rack. Ideal for a multitude of live sound reinforcement scenarios, the TF1 can also be used for live recording, offering 34 x 34 channel digital recording and playback via USB 2.0 using a computer and your preferred DAW software, and 2 x 2 channel recording and playback using any USB storage device.

The TF1 console itself provides 16 analog XLR/TRS combo mic/line inputs with 48V phantom power, as well as 2 analog RCA stereo line inputs, and 16 analog XLR outputs. Each combo input channel features a recallable D-PRE microphone preamp, as well EQ and two dynamics processors. In addition, the console offers eight powerful FX processors with patches ranging from reverb and delay, to modulation effects such as flanger and chorus, to utility processing like 3-band multi-band compression. The TF1 ships with Steinberg's Nuendo Live for advanced multi-tracking and virtual sound check capabilities.

Features at a Glance:

• 17 motor faders (16 channels + 1 master)
• 40 input mixing channels (32 mono + 2 stereo + 2 return)
• 20 Aux buses (8 mono + 6 stereo) + Stereo + Sub
• 8 DCA groups with Roll-out
• 16 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs
• 16 analog XLR outputs
• 34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device
• Download information for CUBASE AI DAW software
• Optional rackmount kit
• 1 expansion slot for optional NY64-D Dante audio interface card
• Optional Tio1608-D Dante equipped I/O rack with 16 microphone/line inputs and 8 line outputs

EAN: 086792992914

Yamaha Tio1608-D2 Dante-Equipped I/O Rack

Simplify your live sound or studio setup with the Yamaha Tio1608-D2, a Dante-compatible I/O rack equipped with 16 mic/line inputs and 8 line outputs. It can control gain from TF Series and DM3 consoles remotely, allowing the construction of a simple stagebox system. The versatile Tio1608-D2 also supports 96k, making it perfect for use as an I/O rack in large installations with products such as the RIVAGE PM or DME7.

The Dante audio network standard is utilized in the DM3 and TF series as well as in the CL and QL digital mixers. These consoles can be freely combined with the Tio1608-D2 or an R series I/O rack to create a system that matches the required scale and budget. Patching can be enabled via œDante Controller while Remote HA can be controlled by œR Remote software. The 2 RU Tio1608-D2 ships with standard IEC power cord and four rubber feet.

A Stagebox that Enhances the Convenience of your Console

The Tio1608-D2 is the ideal stagebox for use with TF Series or DM3. The TF Series can use the optional NY64-D expansion card to connect to up to three Tio1608-D2 units, while DM3 can connect to a single unit. Connecting the console and Tio1608-D2 units with a lightweight, durable Cat 5e Ethernet cable in a daisy chain provides low-latency, high-quality sound transmission without the time-consuming transport and installation required when using analog snakes.

Dante High-Reliability Network Audio Protocol

Dante has been adopted by leading manufacturers and professionals in the sound reinforcement industry for its low jitter, low latency, and high sampling accuracy. Using the Tio1608-D2, you can easily configure a high-performance Dante stagebox system with little or no IT networking knowledge. Thanks to the flexibility of the Dante network protocol, TF Series or DM3 can be connected to an extensive range of Dante-enabled equipment such as R Series I/O racks.

Easy and Fast Configuration

TF Series and DM3 are equipped with functions for automatic configuration of network settings and audio patching connections, making system configuration easy. After configuring the unit ID and QUICK CONFIG switches from the front panel of the Tio Rack, using the QUICK CONFIG function of the TF Series or the AUTO CONFIG function of the DM3 allows you to complete setup simply by connecting the console and Tio Rack with an Ethernet cable. Turn on the power and you're ready to go.

Simple and Flexible Input Selection

Once the basic configuration is completed, you can easily assign inputs to best suit your system setup. All inputs can be assigned uniformly to the Tio Rack in an instant from the TF Series INPUT screen menu or the PATCH screen on a DM3. Users can also change each input to receive signal from multiple locations, allowing effective use of all inputs.

Recallable D-PRE Preamplifiers

The Tio1608-D2 inherits the natural, musical sensibility pursued in the development of the TF Series. Mechanical construction, circuit board layout, power supply, grounding, and parts selection have all been executed with meticulous attention to detail and quality, combined with exhaustive performance and listening tests at each stage of development. The Tio1608-D2 features the same recallable D-PRE microphone preamplifiers as the TF Series to provide a consistent, natural, and musical sound throughout the entire system.

EAN: 889025153454

Yamaha NY64-D Dante I/O Expansion Card for TF Mixers

The NY64-D from Yamaha is an I/O expansion card for the TF-series console that allows transmission and reception of up to 128 channels (64 in/64 out) of uncompressed 24-bit/48 kHz digital audio data via a Dante audio network. It is also compatible with the Tio1608-D Dante-equipped I/O rack (sold separately) and with this setup, it becomes possible to create a stage-box system with up to 48 inputs and 24 outputs.

EAN: 889025101462