4ms Rotating Clock Divider Eurorack Module (4 HP)

4ms RCD Overview

Get creative with tempos using the 4ms Rotating Clock Divider, a Eurorack module that produces eight divided clock tempos from a single input clock. The divisions range from /1 to /64 and include all odd and nonstandard divisions such as /3 and /17 and /62.

The Rotate CV input reassigns the division number of each jack, allowing for creative mix-ups and experimentation. A Reset input jack helps to sync/start with an external clock. The RCD ships with a ribbon power cable and mounting screws.

At a Glance

• Divide-by-1 to Divide-by-64, on 8 output jacks
• CV Rotate jack to shift divide-by amount on each jack
• CV Reset jack to reset/resync all jacks
• Optional break-out panels to expand functionality (Auto-Reset, selectable Divide-By Range, Gate/Trigger, Up/Down-Counting)

Jacks

• Clock Input (5V to 15V clock, rising edge triggered), max 3kHz
• CV Rotate (0V to +5V input)
• CV Reset (5V to 15V trigger)
• Divided Clock Outputs (8 jacks with R as the CV Rotation):
  • Divide-by-(1+R)
  • Divide-by-(2+R)
  • Divide-by-(3+R)
  • Divide-by-(4+R)
  • Divide-by-(5+R)
  • Divide-by-(6+R)
  • Divide-by-(7+R)
  • Divide-by-(8+R)
• Selectable Gate/Trigger mode
• Selectable Divide range up to Divide-by-64 Two jumper pins on the back can be preset with jumpers plugs or used with breakout panel.
• Selectable Auto-reset Reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more danceable even when using the more uncommon clock divisions (3/5/6/7/9/10/11/etc.).

Eurorack Ready

• 4 HP Eurorack format module
• Maximum Depth: 1.39" (35mm)
• Includes power ribbon cable with 16-pin Eurorack power header
• Power consumption: +12V: 33mA, -12V: 4mA