intellijel FLURRY-3U Overview
Generate a wide variety noise and CV/gate signals with the intellijel Flurry, a highly versatile modular synthesis tool that incorporates 16 types of noise, clock/random pulses, sample and hold, track and hold, slew limiting, and an envelope follower, to create a Eurorack module that is rife with opportunities for exploration and experimentation.
Equally capable as a synthesis source, modulator, clock, or signal modifier, the Flurry is bound to find a way to bring new life and dimensions to your synth patches. The module includes a power ribbon cable.
At a Glance
- 16 digital noise types, each with 2 morph parameters, one with a modulation input
- A clock and random pulse source with adjustable and modulatable rate
- Accurate pink and white noise sources
- Analog sample-and-hold and track-and-hold circuits with very low droop
- Analog slew with adjustable slew time and edge selection (rising edge, falling edge, or both)
- Analog envelope follower
16 Noise Types
Bank 1
- FLASHES: (Rainbow): All noise types accessible via the MORPH knob
- RED (Vinyl): Pops, clicks, and hiss
- ORANGE (Wind): Synthetic wind FX
- YELLOW (Droplets): Random FM wavelets
- GREEN (FM Regen): 4-operator FM patch generator
- CYAN (FM Drum): Bank of FM drums
- BLUE (Cymbal): Cymbal noise
- PURPLE (Barber Pole): Phased white noise
- MAGENTA (Shortwave): Shortwave emulation
Bank 2
- FLASHES (Rainbow): All noise types accessible via the MORPH knob
- RED (Amp Hum/Hiss): Amp hum with hiss
- ORANGE (Looped White): Tunable white-noise loop
- YELLOW (Particle): Particle generator
- GREEN (FM Noise): 3-operator FM noise
- CYAN (Phreakbox): Phone tone generator
- BLUE (Cymbal 2): Alternate cymbal noise
- PURPLE (Noise Chorus): Chorused white noise
- MAGENTA (Chaos): Chaotic noise generator
Eurorack Ready
- 8 HP Eurorack format module
- Maximum depth: 1.36" (34mm)
- Includes power ribbon cable with Eurorack power headers
- Power consumption: +12V: 116mA, -12V: 30mA
intellijel FLURRY-3U Specs
Key Specs
Sound Generation | Analog/Digital Hybrid |
Audio I/O | 3x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output |
MIDI I/O | No |
CV/Gate I/O | 3x 1/8" / 3.5 mm TS CV Input 3x 1/8" / 3.5 mm TS Gate/Trigger Input 3x 1/8" / 3.5 mm TS CV Output |
Patch Points | 6x 1/8" / 3.5 mm TS Input 6x 1/8" / 3.5 mm TS Output |
Eurorack Current Consumption | 116 mA on +12 V Rail 30 mA on -12 V Rail |
Horizontal Pitch | 8 HP |
General
Item Type | Eurorack Module |
Sound Generation | Analog/Digital Hybrid |
Expression Controls | No |
Number of Pads | No |
Built-In Speaker | No |
Synthesis
Oscillators | No |
Mixer | No |
Amplifiers | No |
Envelopes | No |
Filters | No |
LFOs | No |
Sequencing & Recording
Sequencer | No |
Arpeggiator | No |
Connectivity
Audio I/O | 3x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output |
MIDI I/O | No |
CV/Gate I/O | 3x 1/8" / 3.5 mm TS CV Input 3x 1/8" / 3.5 mm TS Gate/Trigger Input 3x 1/8" / 3.5 mm TS CV Output |
Patch Points | 6x 1/8" / 3.5 mm TS Input 6x 1/8" / 3.5 mm TS Output |
Sync I/O | No |
Power
Power Requirements | Eurorack Power |
Eurorack Current Consumption | 116 mA on +12 V Rail 30 mA on -12 V Rail |
Physical
Horizontal Pitch | 8 HP |
Included Accessories | No |
Packaging Info
Package Weight | 0.385 lb |
Box Dimensions (LxWxH) | 5.8 x 3.3 x 3" |
In the Box
- intellijel Flurry Clocks, Noise, Randomness Eurorack Module (8 HP)
- Ribbon Power Cable
- Set of Mounting Screws
- 2-Year Manufacturer Warranty
No posts found