intellijel MORGO-3U Overview
Explore the farthest reaches of your imagination with the intellijel Morgasmatron, a dual analog multimode voltage-controlled filter and crossfader. This third revision of the Korgasmatron has been refined and retuned with an even warmer soft-clipping and beefier Q-drive. An analog overdrive circuit based on the Proco Rat guitar distortion pedal was added for howl and growl. Inspired by the Korg MS-20 filter, the Morgasmatron features two completely independent six-mode filters, each with its own mode-select knob, input, output, cutoff, resonance, Q-drive, and gain control. Each filter has a pair of CV inputs (one with a built-in attenuator and the other with a built-in attenuverter) for modulating cutoff, and another CV input for modulating resonance.
Both filters self-oscillate at maximum Q and produce pitched sinewaves that track the two separate 1V/OCT inputs. Use the two filters independently of one another, or you can use them together (in either a series or parallel connection) and smoothly crossfade between them using either the XFADE knob or the XFADE CV input and built-in attenuverter. A MIX output provides a mixed output of the two filters. The module includes a power ribbon cable and a set of mounting screws.
At a Glance
- Analog self-oscillating, crossfading, six-mode dual filter.
- Three FM inputs for each filter: One with 1V/OCT pitch tracking, one with a unipolar attenuator, and one with a bipolar attenuverter.
- Serial or Parallel signal flow.
- Overdrive distortion modelled after the Proco Rat guitar pedal.
Eurorack Ready
- 20 HP Eurorack format module
- Maximum depth: 1.5"
- Includes power ribbon cable with Eurorack power headers
- Power consumption: +12V: 113mA, -12V: 102mA
intellijel MORGO-3U Specs
Key Specs
Sound Generation | Analog |
Audio I/O | 3x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output 2x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input |
MIDI I/O | No |
CV/Gate I/O | 9x 1/8" / 3.5 mm TS CV Input |
Patch Points | 11x 1/8" / 3.5 mm TS Input 3x 1/8" / 3.5 mm TS Output |
Eurorack Current Consumption | 113 mA on +12 V Rail 102 mA on -12 V Rail |
Horizontal Pitch | 20 HP |
General
Item Type | Eurorack Module |
Sound Generation | Analog |
Expression Controls | No |
Number of Pads | No |
Built-In Speaker | No |
Synthesis
Oscillators | No |
Mixer | No |
Amplifiers | No |
Envelopes | No |
Filters | Number of Filters: 2 per Patch Characteristic: Analog MS20-Style Type: Low-Pass, Band-Pass, Notch, High-Pass Slope: 1-Pole/6 dB, 2-Pole/12 dB (LPF) / 1-Pole/6 dB (BPF) / 1-Pole/6 dB, 2-Pole/12 dB (HPF) Key Tracking: Yes Controls: Cutoff, Resonance, Drive, FM, Mode, Resonance Modulation (RM) |
LFOs | No |
Sequencing & Recording
Sequencer | No |
Arpeggiator | No |
Connectivity
Audio I/O | 3x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output 2x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input |
MIDI I/O | No |
CV/Gate I/O | 9x 1/8" / 3.5 mm TS CV Input |
Patch Points | 11x 1/8" / 3.5 mm TS Input 3x 1/8" / 3.5 mm TS Output |
Sync I/O | No |
Power
Power Requirements | Eurorack Power |
Eurorack Current Consumption | 113 mA on +12 V Rail 102 mA on -12 V Rail |
Physical
Horizontal Pitch | 20 HP |
Included Accessories | No |
In the Box
- intellijel Morgasmatron Analog Dual Multimode Self-Oscillating VCF and Crossfader Eurorack Module (20 HP)
- Ribbon Power Cable
- Set of Mounting Screws
- 2-Year Manufacturer Warranty
No posts found