intellijel Outs Balanced Stereo Line and Headphone Output Eurorack Module (6 HP)

intellijel OUTS-3U Overview

Connect your modular synthesizer with the outside world with intellijel Outs, a balanced stereo line and headphone output module in Eurorack format. Output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces.

Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4 dBu balanced professional line-level standard or the -10 dBV unbalanced standard. Headphone monitoring is also provided via a low-noise built-in headphone amp with its own independent level control, capable of driving a wide range of impedances from studio-grade headphones to portable style earbuds. The module includes a power ribbon cable and a set of mounting screws.

At a Glance

• Studio-grade low-noise audio
• Headphone amp capable of driving high impedance headphones via 1/4³ stereo Neutrik jack.
• Two channel, +4 dBu balanced line level outputs on TRS 1/4³ Neutrik jacks (fully compatible with -10 dbV unbalanced audio gear).
• Left input is normaled to the Right input, allowing a mono input signal to drive both stereo output channels.
• LEDs to monitor the modular-level signal sent into the device.
• Attenuator knob for the line out level, plus a separate volume control for headphones.
• 3-pin link connector on the back for connecting the output of a Mixup module directly to the Outs module.

Eurorack Ready

• 6 HP Eurorack format module
• Maximum depth: 1.4" (34.5mm)
• Includes power ribbon cable with Eurorack power headers
• Power consumption: +12V: 37mA, -12V: 29 mA