intellijel 4U Palette Case with 1U Row (104 HP, Stealth Black)

Build your dream rig with the stealth black intellijel 4U Palette Case, a portable Eurorack case that's an ideal solution for the space-conscious needs of a touring artist. The case offers a single row (104 HP) of standard Eurorack (3U) format and a single row of 1U for extra utility modules.

The case also features a built-in utility row with three 1x4 buffered mults, two 2x1 precision summers, four 1/4" TRS connectors, two 3.5mm TRS MIDI (input and output), USB-B MIDI, a power rocker switch, and a 15 VDC power input. The 4U Palette case includes a power brick, power cord, and a 3.5mm to DIN MIDI adapter.

At a Glance

• Anodized aluminum case.
• Aluminum extruded rails.
• Rubber feet to protect your desktop.
• Rear mounted power supply for maximum module depth.
• 104 HP of both 3U space (for standard eurorack modules), and 1U space (for all those necessary little utility modules).
• Three built-in 1x4 buffered mults (chainable into a 1x12) with input level/polarity LEDs.
• Two built-in 2-input summers (chainable with each other and with the Buff Mults).
• Built-in MIDI Input (both USB and 3.5mm TRS Type-A MIDI via the supplied 5-pin DIN adapter).
• Built-in MIDI Out/Thru (via 3.5mm TRS Type-A MIDI jack).
• Four 1/4" TRS jacks, each of which can function as either an input or an output.
• Robust power circuit with 24 shrouded power connectors.
• Access connectors for internally connecting I/O modules to the built-in MIDI and Audio Jacks.
• Link connector for connecting equipped modules (like Mixup and Pedal IO) directly into the 1/4" jacks.

TRS Audio Jack Compatibility

Each of these 1/4" Neutrik TRS jacks can operate as either an audio input or an audio output depending on which modules you connect to the circuit board inside the Palette case. This allows you maximum flexibility when configuring your case whether you wish to use these audio jacks as outputs for a Palette-based synthesizer as inputs for a Palette-based effects device or as a send/return for plugging external pedals or effects devices into your Palette's signal chain.

These jacks may be used with many different modules (not included), such as the following:

• Stereo Line Out 1U: This module, when connected to an Audio Jacks Connector on the circuit board, sends balanced +4 dBu audio out a pair of 1/4" TRS jacks. Use this module to send audio from your Palette case to a mixer, amp, or DAW.
• Stereo Line In 1U: This module, when connected to an Audio Jacks Connector on the circuit board, receives balanced +4 dBu audio from a pair of 1/4" TRS jacks. Use this module to receive external audio for processing with other modules in your Palette case.
• Pedal I/O 1U: This module, when connected to the Link Connector on the circuit board, addresses a pair of 1/4" TRS jacks sending an unbalanced line-level output to the left jack, and returning an unbalanced live-level input from the pair's right jack. Use this module to patch external effects or stomp boxes into your Palette.
• Mixup 3U: This module, when connected to the Link Connector on the circuit board, sends the unbalanced L/R stereo mix from the rear-panel output of Mixup directly to a pair of 1/4" jacks on Palette. Alternatively, you can connect Mixup, so that it receives unbalanced audio from a pair of Palette's 1/4" jacks, instead.
• Stereo Mix 1U: This module, when connected to the Link Connector on the circuit board, sends the unbalanced L/R stereo mix from the rear-panel output of the Stereo Mix 1U directly to a pair of 1/4" jacks on Palette. Alternatively, you can connect Stereo Mix 1U, so that it receives unbalanced audio from a pair of Palette's 1/4" jacks, instead.

Eurorack Ready

• Threaded M3 strips for mounting modules.
• Maximum Module Depth 1.8" / 45.5 mm for middle 102 HP, 1.5" / 37.4mm at each 1 HP edge
• High spec 60W power supply capable of powering up to 24 modules with +12V output at 1500mA and -12V output at 1500mA
• Two 5V connectors, delivering up to 500mA between them