Erica Synths Black System III in Carbon Fiber Travel Case (USA Plug)

Erica Synths 4751030829777 Overview

Fit with a USA plug, the is a limited run of the Black System III that comes in a carbon fiber travel case. The Black System III includes Black Wavetable VCO, 2 x Black VCO2, Black Multimode VCF, Black LPG, Black EG, 2 x Black Quad VCA2, Black Stereo Delay, Black Output, Black Joystick2, Black Modulator, Black Mixer/Splitter, Black Hole DSP2, Black CV Tools, and Black Sequencer. The included case is lighter and sturdier than ever. Carry your gear to a local venue, a distant city, or to a location a continent away on a winding path into the mountains. This limited-edition Black System is the ultimate travel companion for any nomadic sound artist.

Erica Synths Black VCO2 Eurorack Module (12 HP)

Modular synthesizer enthusiasts looking for a highly accurate VCO with built-in sound-shaping capabilities should look no further than the erica synths Black VCO2, an all-analog yet stable Eurorack VCO with four simultaneous waveform outputs and a -1-octave transistor-based suboscillator that generates a distinctive rounded square wave. The Black VCO2 has built in saw waveshaper and two modulation LFOs allowing you to create dynamic waveforms without the need for additional modules. The module includes a power ribbon cable and a set of mounting screws.

• Simultaneous sine, triangle, saw, and pulse-wave outputs
• -1-octave suboscillator
• Highly accurate and stable tracking across 8 octaves
• Saw waveshaper with manual and CV control
• Manually adjustable and CV-controlled pulse width
• Exponential/linear FM input with an attenuator
• 2 built-in modulation LFOs
• Synchronization input
• Octave knob switches -3 through +3 octaves
• 1V/oct input tracks across at least 8 octaves
• Skiff-friendly design
• Power consumption: +71mA / -62mA
• Module depth: 1.4" / 35mm

Erica Synths Black Multimode VCF Eurorack Module (10 HP)

Modular synthesizer enthusiasts looking for a flexible multimode filter will be impressed with the erica synths Black Multimode VCF, a highly stable custom multimode VCF (AS3320 chip produced in Riga, Latvia) with simultaneous high-pass, band-pass, and low-pass outputs. This Eurorack module includes a unique adjustable germanium diode overdrive circuit on the VCF input. The module includes a power ribbon cable and a set of mounting screws.

• Simultaneous HP, BP, and LP outputs
• CV control over Cutoff and Resonance
• Self-oscillation
• Cutoff CV level attenuverter
• Adjustable germanium diode overdrive
• Skiff-friendly design
• Power consumption: +27mA / -29mA
• Module depth: 1.4" / 35mm

Erica Synths Black LPG Low-Pass Gate Eurorack Module (10 HP)

Modular synthesizer enthusiasts in search of versatile sound-shaping processor will be impressed with the erica synths Black LPG, a low-pass gate circuit inspired by the original Buchla design, that combines a 2nd order low-pass VCF with a VCA with a distinctive resonance circuit on top. Voltage control over VCF cutoff frequency, VCA offset, and mode (VCF / VCF+VCA / VCA), as well as built in decay envelope generator makes it a versatile module for sound shaping in any modular setup. The module includes a power ribbon cable and a set of mounting screws.

• Three vactrols for 2nd order VCF
• VCF/VCF+VCA/VCA modes
• Manual and voltage-controlled cutoff/offset
• Manual and voltage-controlled mode selection
• Manual resonance depth control
• Resonance overdrive switch
• Built in decay envelope generator
• Manually and voltage-controlled decay time
• Envelope CV output
• Skiff-friendly design
• Power consumption: +44mA / -45mA
• Module depth: 1.4" / 35mm

Erica Synths Black Quad VCA2 4-Channel VCA Eurorack Module (10 HP)

Modular synthesizer enthusiasts looking for an advanced VCA with multiple channels in a compact form factor will be impressed with the erica synths Black Quad VCA 2, a 4-channel Eurorack VCA module with a custom designed preemphasis / de-emphasis circuit that preserves all the nuances of the original signal.

Each independent channel includes a CV input, manual level adjustment, selectable linear/logarithmic response, and a signal-level indicator. The four outputs combine signals sequentially, meaning that all VCAs are combined at the 4th output. Each output can be used independently or in any combination. The module includes a power ribbon cable and a set of mounting screws.

• 4 independent VCAs
• Selectable lin/log response for each channel
• Manual CV bias and signal-level adjustment
• Sequential output mixing
• Signal-level indicator LEDs
• Power consumption: +170mA / -56mA
• Module depth: 1.4" / 35mm

Erica Synths Black Output V2 Mixer and Stereo Panner Eurorack Module (14 HP)

Modular synthesizer enthusiasts looking for a high-quality output mixer and stereo panner will appreciate the erica synths Black Output V2. The mixer features balanced 1/4" outputs and a dedicated 1/4" headphone output with separate level control. Channels 1 and 2 feature buffered 3.5mm inputs and feature a level control and a stereo pan control. Channel 3 features a CV-controlled pan (autopan) with a dedicated CV attenuator, while channel 4 features a stereo input (2 x 3.5mm, L/R) with simultaneous level adjustment of both channels. The module includes a power ribbon cable and a set of mounting screws.

• Four input mixer with level control and stereo panning
• Input 4 is a stereo input with 2 x 3.5mm connectors (L/R)
• Input 3 features a Pan CV input with a dedicated attenuation knob
• Two balanced stereo 1/4" outputs
• 1/4" headphone output
• Includes master level control and headphone level control
• Power consumption: +52mA / -43mA
• Module depth: 1.4" / 35mm

Erica Synths Black Joystick2 4-Channel Multifunctional CV and Sound Source Eurorack Module (12 HP)

Modular synthesizer enthusiasts looking for a multifunctional CV and sound source will be impressed with the erica synths Black Joystick2, a 4-channel Eurorack module with a joystick, movement recorder, distinct LFOs, and drone/noise oscillator. It provides great interaction with your modular system and allows you to develop unconventional modulation patterns easily.

The Black Joystick2 offer numerous modes beyond the standard X/Y CV joystick, including independent channel modes, a random sinewave LFO, and noise oscillator mode, which controls the pitch and amplitude of the signal, and a SNEW panner (south, north, east, west). The module includes a power ribbon cable and a set of mounting screws.

• 8 simultaneous CV outputs
• 2 gate outputs
• 4 motion-record channels
• Sine and random LFOs with adjustable frequency and amplitude
• Drone/noise oscillator
• Gate record
• Two 4-position CV panners
• Skiff-friendly design
• Power Consumption: +71mA / -20mA
• Module Depth: 1.2" / 30mm

Erica Synths Black Mixer/Splitter V2 Eurorack Module (4 HP)

Modular synthesizer enthusiasts looking for an alternative to stackable patch cables will appreciate the erica synths Black Mixer/Splitter V2, a Eurorack module with a four independently buffered input mixer and a buffered output signal splitter.

The module was created out of frustration that stackable patch cables create as they aren't great for sensitive musical instruments as they mechanically connect electrical signals that at best can cause undesired modulations or even damage the modules. The module includes a power ribbon cable and a set of mounting screws.

• 4 to 1 buffered mixer
• 1 to 4 buffered splitter
• Power consumption: +25mA / -25mA
• Module depth: 1" / 25mm

Erica Synths Black Hole DSP 2 Multi-Effects Eurorack Module (16 HP)

Modular synthesizer enthusiasts looking for an easy-to-use multi-effects processor with plenty of useful and musical results will appreciate the erica synths Black Hole DSP 2, a Eurorack compatible effects processor with 24 custom effects that were designed in cooperation with erica synths team rider KODEK and the creator of SpinCAD software Gary Worsham.

Each effect has 3 manually and CV-controllable parameters. Control the sampling frequency (from 48 kHz to lo-fi) with full analog dry/wet control. All effect parameter settings can be saved to the memory and instantly recalled with the effect, which makes the Black Hole DSP 2 ideal for live performances. The module includes a power ribbon cable and a set of mounting screws.

• 24 custom FV-1 effects
• Stereo inputs and outputs
• 3 manual and CV-controllable parameters
• CV-controlled effect selection
• Manually and CV controllable DSP CPU clock rate
• Effect settings memory
• Full analog Dry/Wet control
• Clipping LED
• Power Consumption: +170mA / -56mA
• Module Depth: 1.4" / 35mm

Erica Synths Black CV Tools Mixer, Scaler, Waveshaper Eurorack Module

Modular synthesizer enthusiasts looking for a highly flexible CV and audio processor will be impressed with the erica synths Black CV Tools, a Eurorack module designed for advanced manipulations with signals (mixing, scaling, offsetting, waveshaping, etc.) The module has several configurations achievable via jumpers on the back of the module. The Black CV Tools module includes a ribbon power cable and mounting screws.

• Two 3-channel audio and CV mixers with unity gain
• 2 attenuverters/boosters and bipolar offset
• Min and Max function extractor
• +5V reference
• LED bipolar level indicators
• Power Consumption: +42mA, -38mA
• Module Depth: 1.4" / 35mm

Erica Synths Black Sequencer Eurorack Module (42 HP)

Modular synthesizer enthusiasts looking for powerful live performance sequencer will be thrilled with the erica synths Black Sequencer, an easy-to-use 4-channel sequencer that's designed to control up to four distinct voices in your Eurorack system. Each of the four channels provides CV, Gate, and modulation outputs. Each sequence can be up to 64 steps and up to 64 patterns can be chained in song mode with each pattern repeating up to 32 times. Each track has independent time divisions, multiplications, and lengths.

The built in quantizer makes sure your control voltages are in tune, while the integrated LFO, envelope generators, and parameter randomizations provide essential functions for composing and performing electronic and experimental music. The sequencer also includes MIDI I/O for sync and control from external devices and controllers. The Black Sequencer provides many programmable parameters per step, yet it is intuitive, easy, and straightforward to use. The module includes a power ribbon cable and a set of mounting screws.

• 4 CV/gate/modulation tracks
• MIDI in and MIDI out
• Clock and Reset in/out
• 16 encoders for easy sequence input
• Up to 64 steps per pattern
• Song mode: Up to 64 patterns in chain, each pattern can be repeated up to 32 times
• Note, glide, gate length and modulation adjustment per step
• Probability, repeats, and ratcheting per step
• Microtonal tuning
• Adjustable shuffle per track, shuffle mode customization
• Timing divisions/multiplications per track
• Built-in quantizer
• Random pattern generator
• 16 banks of 16 pattern memory
• SD card slot for backup and firmware updates
• Power Consumption: +145 mA, -25 mA
• Module Width 42 HP
• Module Depth: 1" / 25mm

Erica Synths Carbon Fiber Travel Case with Lid (208 HP)

Modular synthesizer enthusiasts looking for the ultimate lightweight and portable Eurorack housing case should check out the erica synths Carbon Fiber Travel Case, a rugged 2 x 104 (= 208) HP Eurorack case with a lid that's strong yet lightweight and features nut strip rails for easy installation of your Eurorack modules. The case ships with a universal power supply and features connections for up to 60 modules. The lid is deep enough to transport your modular patch-ready for performance. The Erica Synths Carbon Fiber Travel Case will be a reliable companion when traveling to gigs and keeping your precious system protected.

• A case (with lid: 22.4 x 11.0 x 5.5" ) that meets hand luggage requirements of any airline and therefore is ideal for gigs around the world
• Depth of a case: Max 2.6" and 2.1" (over the PSU connectors)
• Depth of a lid 2.3"
• The case comes with built-in universal PSU, which provides 2.5A at +12V, 2.5A at -12V, 1A at +5V, and Eurorack distribution boards with 60 module connectors