Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Behringer DI20 Overview
Get the best possible signal for your live setup or studio session with the Behringer DI20, an innovative direct injection (DI) box that converts up to two separate unbalanced 1/4" TRS lines into two balanced XLR outputs.
By flipping a switch, you can use the DI20 with two separate mono signals, a stereo signal or a split-signal feeding two separate amps. Additionally, the unit features an attenuator and ground lift switch for added flexibility. The DI20 can be powered by a 9V battery or via +18 to +48 phantom power from a console's microphone inputs.
Benefits
- Professional and multi-purpose direct injection box for stage and studio applications
- Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
- Converts 2 independent unbalanced 1/4" TRS line inputs into 2 balanced XLR outputs
- Additional Split mode (channel 1 assigns signal to both XLR outputs)
- Ultra-flat frequency response due to servo-balanced operation
- Internal battery automatically shuts off when phantom power is applied
- Allows direct connection to speaker outputs with up to 3000W
- Ground-lift switch eliminates typical ground-loop problems
- Input 2 usable as channel 1 Link output (additional to XLR output)
- 1/4" TRS and gold-plated XLR connectors
- Ultra-rugged, road-suitable metal case
Mono, Stereo, or Double the Amps
- By flipping a switch, you can use the DI20 as a launching pad for two separate mono signals, a stereo signal or a split-signal feeding two separate amps.
- The DI20 also features a superb ground-lift switch, and the 3-position input attenuator can accommodate input levels of up to +48 dBu. This handy built-in attenuator also allows you to connect directly to your amplifier’ s speaker outputs, even amps rated as high as 3000W.
- You can power the DI20 with either a 9V battery or your mixer’ s phantom power supply (+18 to +48 VDC).
- The whole package is wrapped in an ultra-compact, road-suitable, and rugged metal housing.
EAN: 689076113915
Behringer DI20 Specs
General
| Item Type | Standard DI |
| Number of Channels | 2-Channel |
| Active/Passive | Active |
| Circuitry | Solid-State |
| Pad | -20 / -40 dB |
| Ground Lift | Yes |
| Polarity Reverse | No |
| Low-Cut/High-Pass Filter | No |
Connectivity
| Audio I/O | 2x 1/4" TRS Unbalanced Line Input 2x XLR 3-Pin Balanced Line Output |
Performance
| Frequency Response | 10 Hz to 70 kHz -3 dB |
| Maximum Input Level | +52 dBu |
| Input Impedance | 250 Kilohms |
| Output Impedance | 600 Ohms |
| Total Harmonic Distortion/Noise | < 0.014% (1 kHz, 0 dBu In) |
| Signal-to-Noise Ratio | -100 dBu |
Power
| Operating Voltage | 18 to 48 V (Phantom Power) |
| Battery Type | 1x 9 V (Not Included) |
Physical
| Dimensions | 5.9 x 5.1 x 2.4" / 150 x 130 x 60 mm |
| Weight | 8.5 oz / 240 g |
Packaging Info
| Package Weight | 0.64 lb |
| Box Dimensions (LxWxH) | 6.9 x 5.35 x 1.9" |
In the Box
- Behringer DI20 Professional Active 2-Channel Direct Box/Splitter
- 2-Years Manufacturer Warranty
No posts found
