Behringer DI800 V2 Rackmountable 8-Channel Mains/Phantom Powered DI Box

Behringer DI800 Overview

The Behringer DI800 V2 is an active direct injection (DI) box that packs eight channels into a 1 RU rackspace. Equally suited for both studio use and live applications, this versatile DI box provides impedance and signal matching for the direct connection of unbalanced line and instruments signals (from guitars, basses, keyboards, effect processors, and other line-level devices) to mixers and amplifiers— with a pristine sound over long cable runs. The unit can operate on either mains power or +48V phantom power from your mixer.

There are eight 1/4" unbalanced input connectors on the front panel. A front-panel LINK connector is wired in parallel with the main input of each channel and can function as an additional input or direct output to an amplifier. There is also a 1/4" unbalanced output connector for each channel, used to send the signal post pad and boost to an additional device. Each channel features a -30 dB pad switch, a +20 dB switch for boosting low-level signals, and a ground-lift switch. On the back panel, each channel has its own balanced XLR output to connect individual signals to the main mixing board.

A Multi-Purpose 8-Channel DI for the Studio and Stage

• 8 1/4" unbalanced input connectors
• 8 1/4" LINK I/O connectors wired in parallel with input connectors (can be used both as input or output)
• 8 XLR balanced output connectors
• Ultra-flat frequency response due to servo-balanced operation
• -30 dB switchable input attenuation
• +20 dB gain switch for pre-amplification of low-level output signals
• Ground-lift switch eliminates typical ground loop problems
• Allows direct connection to speaker outputs with up to 3000W
• 1/4" TRS and gold-plated XLR connectors
• Illuminated switches enable operation in dark environments
• Optional mains or +48V phantom-power operation
• Internal switch-mode power supply (100-240 VAC) for noise-free audio and low-power consumption

EAN: 653341312730