Behringer K8 Overview
Craft mixes that translate across the widest possible spectrum of audio playback devices with the Behringer NEKKST K8 studio monitor, designed by KRK founder Keith Klawitter. This custom-engineered bi-amp system features a total of 150W of Class-D amplification driving an 8" glass-fiber woofer and a 1" silk-dome tweeter for deep, tight bass with virtually smear-proof mids and sparkling highs. In addition, the Advanced Waveguide delivers a very wide sweet spot, allowing you to move about the room and still get an accurate representation of the stereo mix.
Bi-Amplification-The Path to Signal Integrity
With its 150 ultraclean watts of output delivered through separatelypowered drivers via a true bi-amping mode with 2 amplifiers per speaker, the K8 delivers high-resolution sound that really brings out the best in your music.
Instead of applying simple passive crossovers, which not only inaccurately separate the frequency spectrum, but most importantly impact the drivers' performance, Behringer has gone the extra mile, driving each woofer and tweeter with a separate amplifier for improved signal integrity.
Thoughtful Design
The ultralinear 150-watt reference-class NEKKST K8 was designed by renowned acoustic icon and founder of KRK, Keith R. Klawitter— a man who has devoted much of his life to the quest for the perfect loudspeaker. The K8 features Keith’ s advanced Waveguide technology for the ultimate in acoustic dispersion, which generates an extremely large sweet zone for easy and optimal monitoring.
A true bi-amped system, an ingenious crossover design, and separate amplifiers are utilized for high- and low-frequency signals, providing superb sound reproduction from the long-throw, deformation-resistant, glass-fiber cone woofer and pristinely accurate silk-dome tweeter. The NEKKST K8 not only satisfies seasoned engineers and producers, but makes audiophile-level sound accessible to both home and professional recording studio applications. Keith Klawitter wrote the book when it comes to modern studio monitors, and to quote the monitor-master— This is my best work yet!
Environmentally Friendly
The ability for a studio monitor to adapt to a wide range of acoustic conditions is of paramount importance, and the NEKKST K8 delivers extreme versatility in this arena. K8’ s rear panel features switches for adjusting high- and low-frequency response, compensating for varying room attributes, or for pairing with a dedicated subwoofer. Independently controlled limiters protect both the woofer and tweeter against overload.
Since a monitor’ s output is only as good as its input, the NEKKST K8 includes a servo-balanced front end and accepts XLR, TRS, and unbalanced RCA connectors for extremely flexible connectivity. The high-density composite enclosure guarantees ultralow diffraction and reduced low-frequency distortion.
At a Glance
- Ultralinear 150-watt reference-class studio monitor
- Designed by renowned acoustic icon Keith Klawitter, founder of KRK
- Advanced Waveguide technology creates ultimate acoustic dispersion and an extremely large sweet zone
- True bi-amping mode with 2 separate amplifiers for ultimate sound reproduction
- Ultrahigh resolution, 1" silk-dome tweeter for ultimate sound reproduction
- Long-throw 8" woofer with deformation-resistant glass-fiber cone
- Adjustable to a wide range of acoustic conditions and subwoofer operation
- Separately controlled limiter for low- and high-frequency overload protection
- Servo-balanced inputs with XLR, TRS, and unbalanced RCA connectors
- High-density composite enclosure for ultralow diffraction and reduced low-frequency distortion
- Planet Earth power supply for maximum flexibility (100 to 240V), noise-free audio, and superior transient response, plus low power
Behringer K8 Specs
Monitor Type & Configuration | Active 2-Way |
Total Power Output | 150 W |
Tweeter | 1x 1" / 25.4 mm Silk Dome |
Woofer | 1x 8" / 20.3 cm Fiberglass Cone |
Frequency Range | 40 Hz to 20 kHz |
Audio I/O | 1x XLR 3-Pin Balanced Speaker Input 1x 1/4" TRS Balanced Speaker Input 1x RCA Unbalanced Speaker Input |
Digital Audio I/O | No |
Network I/O | No |
Wireless | No |
Number of Included Monitors | Single Monitor |
Enclosure | Bass-Reflex/Ported |
Total Power Output | 150 W |
Drivers
Tweeter | 1x 1" / 25.4 mm Silk Dome |
Woofer | 1x 8" / 20.3 cm Fiberglass Cone |
Performance
Frequency Range | 40 Hz to 20 kHz |
Maximum Sound Pressure Level (SPL) | 102 dB |
Signal Processing
EQ | 1x LF Shelf: 0 to -6 dB at 60 Hz (2 dB Increments) 1x Low-Mid Notch/Peak: 0 to -6 dB at 300 Hz (2 dB Increments) 1x HF Notch/Peak: 2 to -4 dB at 8 kHz (2 dB Increments) |
Filters | No |
Parametric EQ | No |
Crossover Frequency | 3 kHz |
Crossover Type | Active |
Phase Adjustment | No |
Connectivity
Audio I/O | 1x XLR 3-Pin Balanced Speaker Input 1x 1/4" TRS Balanced Speaker Input 1x RCA Unbalanced Speaker Input |
Digital Audio I/O | No |
Network I/O | No |
USB | No |
Wireless | No |
Mobile App Compatible | No |
Power
AC Input Power | 100 to 240 VAC, 50/60 Hz |
Power Consumption | 40 W |
Physical
Color | Black |
Monitor Orientation | Vertical |
Fan-Cooled | No |
Mounting Points | No |
Dimensions (W x H x D) | 10.3 x 15.5 x 12.4" / 26.1 x 39.3 x 31.5 cm |
Weight | 19.2 lb / 8.7 kg |
Packaging Info
Package Weight | 23.54 lb |
Box Dimensions (LxWxH) | 18.9 x 15.3 x 14.6" |
In the Box
- Behringer NEKKST K8 150W Bi-Amplified 8" Studio Monitor
- Power Cord
- 2-Years Manufacturer Warranty
No posts found