Quested Q212D/DN Overview
The Q212D Monitoring System from Quested includes a pair of three-way active speakers designed to be main monitors for mid-sized control rooms or as a component of a multichannel system in a large control room. Each monitor is comprised of two 12" low frequency drivers, one 3" mid frequency driver, and one 1.5" high frequency driver that combine to provide effortless and articulate performance with sound pressure levels of 123 dB. The monitors are supplied with a separate electronics package containing one AP1300 amplifier, two AP800 amplifiers, and the SM748 electronic crossover/loudspeaker management system. The Q212D ships with four IEC power cables.
Quested Q212D/DN Specs
Q212D
| Driver | Bass: 2 x 12" / 38 cm Mid: 3" / 7.5 cm High: 1.5" / 3.7 cm |
| Maximum SPL | 126 dB at 1 m |
| Frequency Response | 20 Hz to 20 kHz ±2 dB |
| Input Connections | Gold Plated Binding Post: Twin pair Accepts 0.2" / 0.4 cm banana plugs or bare wires |
| Amplifier (Power) | Bass: 1250 W (RMS) into 4 Ohms Mid: 450 W (RMS) into 8 Ohms High 450: 450 W (RMS) into 8 Ohms |
| Crossover Point | Low: 450 Hz Linkwitz-Riley 24 dB/oct High: 4.5 kHz Linkwitz-Riley 24 dB/oct |
| Dimensions | 27.6 x 27.6 x 25.2" / 70.0 x 70.0 x 64.0 cm |
| Weight | 176.4 lb / 80.0 kg |
AP800
| Power Rating | 450 W into 8 ohms 770 W into 4 ohms |
| Damping Factor | 400 @ 8 ohms 1 kHz |
| Input Sensitivity | +7 dBm |
| Input Impedance | 10 kOhms |
| Gain | 33 dB |
| Frequency Response | 20 Hz to 20 kHz |
| Signal to Noise Ratio | Not specified by manufacturer |
| Total Harmonic Distortion (THD) | 0.005% |
| Input Connections | 3-pin XLR |
| Output Connectors | Shrouded Binding Posts: 4 mm |
| Controls Front Panel | On/Off, rotary potentiometers, mute |
| Controls Rear Panel | 2/4 or 4/8 switch, stereo or bridged switch |
| Indicators | Peak meters, mute, fault/DC & limit, bridged, power, temperature |
| Cooling | Temperature warnings and 2 fans to assist |
| Power Consumption | Not specified by manufacturer |
| Power Requirements | 230 VAC @ 10 A max 120 VAC @ 20 A max |
| Dimensions | 19 x 1.75 x 15" (48.2 x 8.8 x 38.1cm) |
| Weight | 51 lbs (23kg) |
AP1300
| Power Rating | Watts RMS per channel 16 ohms: 400 8 ohms: 750 4 ohms: 1250 3 ohms: 1600 2 ohms: 1800 |
| Damping Factor | 1 kHz, 8 ohms |
| Input Sensitivity | 80 dB |
| Input Impedance | 10 kOhms |
| Gain | 33 dB |
| Frequency Response | 20 Hz to 20 kHz |
| Signal to Noise Ratio | Not specified by manufacturer |
| Total Harmonic Distortion (THD) | 0.008% |
| Input Connectors | 3-pin XLR |
| Output Connectors | Shrouded Binding Posts: 4 mm |
| Controls Front Panel | Level controls, mute, link switch, signal limiters, temperature |
| Controls Rear Panel | 2 ohm and bridged LEDs |
| Indicators | Level indicators, fault indicators, clip warning, 2 ohms, and bridged LEDs |
| Cooling | Cooling fans and temperature controls |
| Power Consumption | Not specified by manufacturer |
| Power Requirements | 230 VAC @ 20.0 A max 120 VAC @ 38.0 A max |
| Dimensions | 18.9 x 5.1 x 18.1" (48 x 13 x 46cm) |
| Weight | 70.5 lbs (32kg) |
SM-748
| Filter Type | Bessel/Butterworth/Linkwitz-Riley 12-24-48 dB/8ve Bessel/Butterworth 18 dB/8ve |
| Operating Modes | Input: 2/4 Output: 4/6/8 |
| Crossover Frequencies | Parametric EQ (8 per Input / 9 per Output): Gain: +15 dB to -30 dB in 0.1 db steps Frequency: 19.7 Hz to 32 kHz, 136 octave steps Q/BW: 0.4 to 128 / 2.5 to 0.008 (Sections can be switched to shelving response) High and Low-pass Filters (1 of each per output): |
| Gain Range | Input: +6 dB to -40 dB in 0.1 dB steps Output: +15 dB to -40 dB in 0.1 dB steps and mute |
| Front Panel Switches | 12 x Mute buttons 12 x Channel edit buttons 6 x Utility buttons 3 x Rotary encoders |
| Inputs | Analog: 4 x XLRf Digital: Not specified by manufacturer |
| Outputs | Analog: 8 x XLRm Digital: Not specified by manufacturer |
| Maximum Input Level | Not specified by manufacturer |
| Maximum Output | +20 dBm into 600 ohms |
| Frequency Response | 20 Hz to 20 kHz, +1/2dB (-3dB @ 32kHz) |
| Dynamic Range | >116 dB, 20 Hz to 20 kHz unweighted |
| Noise | Not specified by manufacturer |
| Display | 2 x 24 character LCD 2 x 6 point input and 8 x6 point output meters |
| Dimensions | 19 x 11.8 x 1.75" (482 x 300 x 45mm) |
| Weight | 7.3 lbs (3.3 kg) |
| Specialties | Program limiter and look-ahead "D-Max" limiter per output Program Limiter: D-Max Limiter: |
In the Box
- Quested Q212D Active 3-Way Monitoring System with Amp and Crossover (Pair)
- 2-Year Warranty
No posts found
